| FAG 515805 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:109 mm; manufacturer upc number:087796205031; D:310 mm; internal clearance:C2; bore type:Straight; cage material:Steel Cage; d:200 mm; |
| FAG 528562 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | roller material:Stainless Steel; thread size:1/2-20; closure type:Open; D:1.5625 in; eccentric stud diameter:0.6870 in; stud diameter:0.5000 in; finish/coating:Uncoated; operating temperature range:Maximum of +250; radial dynamic load capacity:1350 lbs; roller width:0.8440 in; flange thickness:0.2190 in; axial static load capacity:370 lb; lubrication hole location:None; roller diameter:1.2500 in; |
| FAG 529086 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | inner ring width:31 mm; bore type:Round; d:60 mm; precision rating:ABEC 1; snap ring included:Without Snap Ring; outer ring width:31 mm; manufacturer upc number:087796294189; cage material:Steel; B:31 mm; internal clearance:C3; closure type:Two Contact Seals; D:130 mm; |
| NTN CRTD3401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | maximum p value:4000 psi; material:Cast Bronze; D:2-3/4 in; maximum v value:750 fp/min; standards met:83-7-7-3, ASTM B505,; groove/plug type:None; d:1-3/4 in; overall length:13 in; maximum pv value:75000; material specification:SAE 660 (C932&#; operating temperature range:-450 to +500 &d; |
| FAG 513125 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Static Load Rating (kN):8.1; Dynamic Load Rating (kN):22.8; Availability:In Stock; D:90mm; Clearance:C3; Weight:0.02 KGS; Grease Limiting Speed (r/min):6300; B:20mm; Oil Limiting Speed (r/min):8000; Cage Type:Plastic; d:50mm; Seals or Shields:Open Type; SKU:1210tnc3-nsk; |
| FAG 549701 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | flanges:(2) Outer; precision rating:RBEC 1 (ISO Cla; internal clearance:C0; cage material:Brass; bore type:Straight; closure type:Open; series:CD22; finish/coating:Uncoated; |
| NSK 260TFD3601 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B1:139 mm; da:190 mm; Q120°:1800 kN; Ca:120 mm; r:4 mm; Locating ring:2 x FRB 14/340; bb:267 mm; Oil level, min.:88 mm; Oil fill, min.:3.1 l; P120°:1040 kN; N:50 mm; N1:42 mm; Ga:M 190x3; P180°:1250 kN; J6:640 mm; Cap bolt, rec. tightening torque:350 N·m; Cap bolt, size:M 24x160; H:480 mm; PG:G 3/4; N4 max.:20 mm; |
| 511746 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | finish/coating:Black Oxide; series:Inch CAMROL (CY; d:1.0000 in; closure type:Sealed; roller width:1.7500 in; bearing element:Needle Rollers; maximum rpm:880 rpm; radial static load capacity:31500 lbs; operating temperature range:-30 to +250 &de; lubrication hole location:Inner Ring; radial dynamic load capacity:15720 lbs; roller shape:Flat; manufacturer catalog number:4320110000; B:1.8125 in; |
| NSK 200TFD2801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | duty type:Standard Duty; seal type:Triple Lip with Flin; locking device:Set Screw; D:4.5900 in; expansion type:Non-Expansion Bearin; radial static load capacity:2538 lb; manufacturer catalog number:136795; bore type:Round; finish/coating:Uncoated; length through bore:1.59 in; radial dynamic load capacity:3713 lb; standards met:UL, NSF H1, AFBMA, A; maximum rpm:5250 RPM; housing material:Stainless Steel; |
| FAG 52372 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | radial dynamic load capacity:4410 lbf; D:3.2500 in; mounting type:Four-Bolt Flange; replacement bearing:UE206-19; locking device:Accu-Loc; duty type:Standard Duty; radial static load capacity:2540 lbf; end type:Open; series:UEFPL200CW; lubrication type:Lubrication Fitting; expansion type:Non-Expansion Bearin; bore type:Round; seal type:Contact with Flinger; housing material:PBT Thermoplastic; d:1.1875 in; |
| FAG 545678 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:0.3125 in; grade:Commercial Extra Cap; lubrication type:Non-Lubricated; housing material:Carbon Steel; thread direction:Left Hand; ball material:Carbon Steel /; rod end type:Male Threaded; |
| SKF 350901C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | material:Steel; series:MB-00; face diameter:79 mm; key width:8 mm; outside diameter over tangs:92 mm; d:65 mm; compatible lock nut number:KM13; tang thickness:1.5 mm; |