| K163398 Timken Tapered Roller Bearing Assembly | da:61.913 mm; Limiting speed:1100 r/min; S:0.794 mm; Attachment bolt diameter G:15.875 mm; Mass bearing unit:8.39 kg; H:144.463 mm; A:73.025 mm; Basic dynamic load rating C:148 kN; J min.:209.55 mm; H1:69.85 mm; L:266.7 mm; H2:41.275 mm; s:31.75 mm; B:85.725 mm; J max.:222.25 mm; d2:101.6 mm; A1:91.281 mm; |
| 67323D Timken Tapered Roller Bearing Assembly | Dynamic (Cr):9 mm; rs (min):4 mm; Grease:4130 kN; D:440 mm; Static (Cor):16.7 mm; with tapered bore:1 000 min-1; Pu:2610 kN; with cylindrical bore:800 min-1; Oil:345.870 kN; B:144 mm; d:260 mm; |
| NP087208 Timken Tapered Roller Bearing Assembly | A6:19.05 mm; Basic dynamic load rating C:77 kN; da:42.862 mm; Mass bearing unit:4.54 kg; Limiting speed:4500 r/min; L:136.525 mm; B:73.025 mm; s:25.4 mm; A1:76.994 mm; A5:29.369 mm; a:3.969 mm; J:104.775 mm; Attachment bolt diameter G:12.7 mm; N1:14.287 mm; A:58.737 mm; S:0.794 mm; d2:68.659 mm; |
| NP835117 Timken Tapered Roller Bearing Assembly | h:265 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:315 kN; dk:92 mm; G:M 72x4; Basic static load rating C0:490 kN; d:70 mm; Material constant KM:330; B:49 mm; d2 max.:162 mm; l7 min.:85 mm; α:6 °; C1 max.:43 mm; l1 min.:132 mm; r1 min.:1 mm; l2 max.:349 mm; Mass rod end:10 kg; |
| 127136CD Timken Tapered Roller Bearing Assembly | d2 max.:47 mm; h:72 mm; B:23 mm; l2 max.:97 mm; r1 min.:0.3 mm; G:M 18x1.5; C1 max.:17.5 mm; l1 min.:41 mm; Specific dynamic load factor K:50 N/mm²; dk:31.7 mm; Basic dynamic load rating C:26 kN; Basic static load rating C0:29 kN; Mass rod end:0.26 kg; Material constant KM:330; d:18 mm; α:15 °; |
| NP682333 Timken Tapered Roller Bearing Assembly | Limiting speed:1000 r/min; r3,4 min.:0.6 mm; d1 ≈:101.5 mm; Basic static load rating C0:430 kN; D:130 mm; -:0.2 mm; Ca2:46 mm; Mass bearing:2.83 kg; C:59 mm; Calculation factor kr:0.4; das:100 mm; Fatigue load limit Pu:55 kN; b1:6 mm; Basic dynamic load rating C:270 kN; K:3.5 mm; d:85 mm; +:0.2 mm; da min.:91 mm; b:4.2 mm; |
| K75277 Timken Tapered Roller Bearing Assembly | D:72.0000 mm; Accessories:Two Shields & Snap-R; Fillet Radius ra:1.00 mm; B:19.00 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; Grease Speed Rating Open/Shielded n1:9000 rpm; d:20.000 mm; Basic Dynamic Radial Load Rating C:29200 N; Basic Static Radial Load Rating Co:18600 N; |
| Y2S11416 Timken Tapered Roller Bearing Assembly | Cap bolt recommended tightening torque:400 N·m; Cap bolt, SAE grade:5; H2:60.325 mm; Eye bolt:3/8-16 UNC; A2:269.875 mm; Da:230 mm; R1:79.375 mm; ba:65.881 mm; h:60.325 mm; Initial grease fill:382.73 g; J max.:406.4 mm; R2:36.513 mm; N1:25.4 mm; Taconite seal:TER 117; da:112.713 mm; Appropriate attachment bolt size G:0.875 in; End plug (suffix Y):EPR 15; L:466.725 mm; PG:1/4 NPT; Stabilizing ring:SR-26-0; |
| Y1S991 Timken Tapered Roller Bearing Assembly | Da max.:388.5 mm; r2 min.:1.1 mm; Basic static load rating C0:18000 kN; Specific dynamic load factor K:100 N/mm²; Mass plain bearing:65 kg; Basic dynamic load rating C:3550 kN; Sealing solution:Triple-lip seals; Da min.:344.5 mm; C:120 mm; da min.:294 mm; D:400 mm; Lubricant:Regular relubricatio; da max.:313.5 mm; ra max.:1 mm; M:7 mm; Design (sliding contact surface combination):Steel/steel; |
| JXH10010A/HM720210ES Timken Tapered Roller Bearing Assembly | Fatigue load limit Pu:8.3 kN; Basic dynamic load rating C:30.3 kN; Basic static load rating C0:68 kN; Mass needle roller and cage assembly:0.043 kg; Reference speed:11000 r/min; Ew:43 mm; Fw:38 mm; U:27 mm; Limiting speed:12000 r/min; |
| M262410D Timken Tapered Roller Bearing Assembly | Hydraulic nut:HMV 15 E; G:M 75x2; d3:98 mm; d:75 mm; d1:65 mm; B:16 mm; Mass adapter sleeve assembly:0.82 kg; B1:55 mm; |
| 91113XD Timken Tapered Roller Bearing Assembly | J max.:279.4 mm; Cap bolt, SAE grade:8; Labyrinth ring (dc shaft position):LOR 37; h:36.513 mm; db:77.787 mm; Stabilizing ring:2 x SR-1613; Cap bolt:2 x 5/8-11 UNC; Appropriate attachment bolt size G:0.625 in; L:330.2 mm; P150°:19.6 kN; R1:53.181 mm; Da:140 mm; P60°:60.5 kN; R2:21.431 mm; Ca:57.785 mm; Initial grease fill:175.77 g; P120°:21.8 kN; H1:88.9 mm; Housing:FSAF 313; End plug (suffix Y):EPR 7; |