| No. | Brand | N | U | T | K | J | F | L | E |
| K412057 | Timken | - | - | 355.6 mm | - | - | - | - | - |
| T7009SCTDULP3 | NSK | - | - | - | - | - | - | - | - |
| 40Mn | - | - | - | - | - | - | - | - | - |
| 08123-62027 | - | - | - | - | - | - | - | - | - |
| 61811-2RS1 | SKF | - | - | - | - | - | 180 mm | - | - |
| 95cm | - | - | - | - | - | - | - | - | - |
| 6704-2RS | - | - | - | - | - | - | - | - | - |
| 4mm | - | - | - | - | - | - | - | - | - |
| NP114036 | Timken | - | - | - | - | - | - | - | - |
| 2HA-2Z | Rexroth | - | - | - | - | - | - | - | - |
| 12"inch | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| 1 | NTN | - | - | - | - | - | - | - | - |
| (4D84-3) | - | - | - | 308 mm | - | - | - | - | - |
| BK3016 | INA | - | - | - | - | - | - | - | - |
| 160LMW | - | - | - | - | - | - | - | - | - |
| Har1005 | - | - | - | - | - | - | - | - | - |
| 62132ZRL12 | fag | - | - | - | - | - | - | - | - |
| 1000W/2000W/3000W | - | - | - | - | - | - | - | - | - |
| 510071 | Timken | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| 1700 | fag | - | - | 365.125 mm | - | - | - | - | - |
| 15mm | INA | - | - | - | - | - | - | - | - |
| Q25D-08B | - | - | - | - | - | - | - | - | - |
| M88048 | Timken | - | - | - | - | - | - | - | - |
| [10 | - | - | - | - | - | - | - | - | - |
| 6001ZZE | Nachi | - | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - | - |
| 22226 EK + AHX 3126 BEARING 125*230*64MM | Pu:11.950 kN; D:100 mm; E:mm; r1s (min):1.5 mm; B:25 mm; d2:45 mm; Static (Coa):98 kN; b:7 mm; d2 (max):64.6 mm; Dynamic (Ca):102 kN; |
| 23988CC/W33 23988CCK/W33 Spherical Roller Bearings | Tolerance housing:H7; Specific dynamic load factor K:140 N/mm²; Coefficient of friction µ max.:0.08; B:200 mm; Specific static load factor K0:200 N/mm²; D:220 mm; d:200 mm; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.03; Tolerance shaft:h8; |
| DH220-5 Excavator Slewing Bearing | Fatigue load limit Pu:1.46 kN; Ew:24 mm; Mass needle roller and cage assembly:0.0065 kg; Limiting speed:22000 r/min; Fw:20 mm; Basic static load rating C0:12.9 kN; Basic dynamic load rating C:8.58 kN; Reference speed:20000 r/min; U:10 mm; |
| 21306CC/W33 Bearing | Reference speed:8500 r/min; Limiting speed:10000 r/min; Da max.:56 mm; Basic dynamic load rating C:45.7 kN; Cb min.:3.5 mm; da max.:44 mm; Basic static load rating C0:52 kN; Fatigue load limit Pu:5.4 kN; D:63 mm; Db min.:60 mm; |
| Spherical Roller Thrust Bearing 241/560ECJW33 | B:65.00 mm; Accessories:One Shield; Fillet Radius ra:3.00 mm; Sealed Speed Rating n3:1600 rpm; d:105.000 mm; Basic Dynamic Radial Load Rating C:247000 N; Basic Static Radial Load Rating Co:228000 N; Oil Speed Rating Open/Shielded n2:2900 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; D:290.0000 mm; |
| 23224CAME4 Spherical Roller Bearings | P55°:4000 kN; N4 max.:20 mm; Q150°:1040 kN; Ca:140 mm; P90°:1900 kN; Oil level, max.:70 mm; H2:90 mm; A:280 mm; Eye bolt, size:2 x M 20; s:12 mm; |
| 22314CC/W33 Bearing | B:40 mm; Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.23 kg; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; D:65 mm; Tolerance shaft:h8; d:55 mm; Specific dynamic load factor K:10 N/mm²; Tolerance housing:H7; |
| 22224CC/W33 Bearing | Grease Speed Rating Open/Shielded n1:22000 rpm; Basic Static Radial Load Rating Co:3100 N; Oil Speed Rating n2:28000 rpm; Grease Speed Rating n1:22000 rpm; Fillet Radius ra:0.64 mm; Basic Dynamic Radial Load Rating C:6890 N; B:10.00 mm; Oil Speed Rating Open/Shielded n2:28000 rpm; Sealed Speed Rating n3:15000 rpm; D:32.0000 mm; |
| 231/600 CA/W33 231/600 CAK/W33 231/600 CC/W33 231/600 CCK/W33 Spherical Roller Bearing | Oil level, min.:49 mm; A2:235 mm; P180°:950 kN; da:176.213 mm; N:34 mm; Oil level, max.:57 mm; Da:290 mm; A:235 mm; J6:490 mm; Pa:620 kN; |
| 24022CAK/W33 Spherical Roller Bearing | Mass pillow block:33.1 kg; H2:50.8 mm; Cap bolt recommended tightening torque:203.4 N·m; N1:22.225 mm; h:45.244 mm; P60°:149 kN; Labyrinth ring:2 x LOR 557; PosiTrac Plus contact element:2 x B10724-109; Adapter sleeve assembly:SNW 22x3.11/16; Bearing:22222 EK; |
| Spherical Roller Bearing 24130C/W33 | Cap bolt, SAE grade:5; RG:3/4 NPT; ba:82.55 mm; J min.:441.325 mm; H2:66.675 mm; Bearing limiting speed:2200 r/min; P60°:226 kN; Cap bolt recommended tightening torque:203.4 N·m; H:336.55 mm; A2:223.838 mm; |
| 240/500 CA/W33 Spherical Roller Bearing | P60°:230 kN; RG:3/4 NPT; H1:160.325 mm; J min.:431.8 mm; ba:67.469 mm; Eye bolt:2 x 3/8-16 UNC; Housing:SAF 624; Stabilizing ring:SR-0-24; Bearing limiting speed:2600 r/min; Labyrinth ring:2 x LOR 111; |
| 24122MB/W33 24122CC/W33 Chome Steel Bearing | d1 ≈:127 mm; Mass bearing:3.5 kg; Da max.:160 mm; Basic static load rating C0:400 kN; Basic dynamic load rating C:275 kN; da min.:119 mm; Calculation factor kr:0.3; D1 ≈:149 mm; Fatigue load limit Pu:47.5 kN; Limiting speed:2200 r/min; |
| 22244CC/W33, 22244MB/W33, 22244CA/W33, 22244E Bearing | Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:72800 N; B:39.70 mm; Accessories:Two Seals; Basic Static Radial Load Rating Co:53000 N; d:45.000 mm; Sealed Speed Rating n3:4500 rpm; D:100.0000 mm; Grease Speed Rating n1:4500 rpm; Oil Speed Rating n2:6000 rpm; |
| 240/630 CA W33 C3 Spherical Roller Bearing | Comparative radial load rating CF:1660 kN; Design variant/feature:TQO/WI; Basic dynamic load rating C:6160 kN; Fatigue load limit Pu:1400 kN; r1,2 min.:3 mm; Thrust factor K:2.4; d1 ≈:476 mm; T:450 mm; Calculation factor Y0:2.8; d:450 mm; |
| Bearing Rolamento Spherical Roller Bearing 24024CC/W33 Bearing | F:72 mm; Mass bearing:0.77 kg; d:60 mm; ra max.:1.5 mm; Fatigue load limit Pu:13.4 kN; da max.:70 mm; Da max.:101 mm; s max.:1.4 mm; r1,2 min.:1.5 mm; Calculation factor kr:0.15; |
Spherical roller bearing - Wikipedia
A spherical roller bearing is a rolling-element bearing that permits rotation with low friction, and permits angular misalignment. Typically these bearings support a rotating shaft in the bore of the inner ring that may be misaligned in respect to the outer ring
Spherical Roller Bearings - NSK Americas
Spherical Roller Bearings - designed and manufacturered to withstand even the most demanding conditions
Spherical Roller Bearings | Roller Bearings | Products | NSK Global
Shown in the figures, types EA, C, CD, CA, which are designed for high load capacity, are available. Types EA, C, and CD have pressed steel cages; and type
Spherical roller bearings
Spherical roller bearings have two rows of symmetrical rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the
Rollway Spherical Roller Bearings - Regal Power Transmission
Spherical roller bearings are designed for heavy loads, shaft misalignment and deflection. View specifications, get downloads, and more
Spherical roller bearings have their own places in the world of
Spherical roller bearings have their own places in the world of bearings. If you design or maintain machinery, this will help you find their best locations, often
Spherical Roller Bearings | NTN Bearing
Spherical roller bearings are dedicated to extremely severe applications and must support high loads, severe misalignment, contaminated environments, shocks
Spherical Roller Bearing | The Timken Company
If you have challenges when managing high radial loads, use Timken® spherical roller bearings. Made to handle it all & designed to extended bearing life and
Spherical Roller Bearings | AST Bearings
Spherical Roller Bearings are designed to work in applications where severe misalignment exists whether from mounting or shaft deflection and with relatively
22313MB/W33, 22313MBK/W33 Spherical Roller Bearing Video