| Fine 22212 MBW33, 22212CCW33, 22212 CAW33 Spherical Roller Bearings | G:M 40x1.5; d:40 mm; Lock nut:KMFE 8; Mass adapter sleeve assembly:0.19 kg; B:13 mm; B1:36 mm; d3:58 mm; d1:31.75 mm; |
| Spherical Roller Bearing 22308E 22308EK 22308CC/W33 22308CCK/W33 | Basic Dynamic Radial Load Rating C:88000 N; Oil Speed Rating n2:4800 rpm; d:65.000 mm; D:120.0000 mm; Sealed Speed Rating n3:3600 rpm; Accessories:Two Shields & Snap-R; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:3600 rpm; B:38.10 mm; Basic Static Radial Load Rating Co:106000 N; |
| 24126CAK Spherical Roller Bearing | d:75.000 mm; D:160.0000 mm; Sealed Speed Rating n3:2600 rpm; Basic Static Radial Load Rating Co:140000 N; Accessories:Two Seals; Oil Speed Rating n2:3600 rpm; Basic Dynamic Radial Load Rating C:168000 N; Grease Speed Rating n1:2600 rpm; Fillet Radius ra:2.00 mm; B:68.30 mm; |
| Spherical Roller Bearing 24030CA/W33 | d1:850 mm; Hydraulic nut:HMV 190 E; G2:G 1/4; B1:475 mm; A:15 mm; Mass withdrawal sleeve:379 kg; G1:63 mm; B2:495 mm; Nut for removal:HM 31/950; G:Tr 950x8; |
| 24138 CC/W33 24138 CCK30/W33 Bearing | Oil Speed Rating Open/Shielded n2:20000 rpm; d:20.000 mm; D:42.0000 mm; Sealed Speed Rating n3:11000 rpm; Grease Speed Rating Open/Shielded n1:17000 rpm; Basic Static Radial Load Rating Co:5000 N; Fillet Radius ra:0.64 mm; B:12.00 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:9360 N; |
| 22217MB/W33, 22217MBK/W33 Spherical Roller Bearing | d3:58 mm; G:M 40x1.5; B1:36 mm; Mass adapter sleeve assembly:0.19 kg; B:13 mm; d:40 mm; Lock nut:KMFE 8; d1:35 mm; |
| 24160CA/W33 24160CA SX-24160C Spherical Roller Bearing | Specific static load factor K0:200 N/mm²; B:120 mm; Coefficient of friction µ min.:0.03; d:160 mm; Specific dynamic load factor K:140 N/mm²; Tolerance shaft:h8; Tolerance housing:H7; D:180 mm; Effective load carrying cross section A:18880 mm²; Permissible sliding velocity v max.:0.5 m/s; |
| 232/560 CA/W33 Giant Spherical Bearing | G:M 190x3; K:9 mm; Fatigue load limit Pu:140 kN; d2 ≈:213 mm; r1,2 min.:4 mm; Calculation factor e:0.26; Calculation factor Y0:2.5; Basic dynamic load rating C:1237 kN; Reference speed:1800 r/min; d1:170 mm; |
| 23120MB/W33 23120CC/W33+H3120 Bearing | RG:3/8 NPT; R1:60.325 mm; da:79.375 mm; P60°:121 kN; ba:40.481 mm; P120°:45.4 kN; J max.:298.45 mm; Bearing:22218 EK; Cap bolt:2 x 5/8-11 UNC; Adapter sleeve assembly:SNW 18x3.1/8; |
| 23028CA/W33 23028CA Spherical Roller Bearing | d3:105 mm; Grub (set) screw size:M8; h:3.5 mm; Mass lock nut:0.49 kg; b:8 mm; B:18 mm; d1:93 mm; Associated spanner:HN 16; Recommended grub screw tightening torque:18 N·m; B3:3 mm; |
| Spherical Roller Bearings WQK 24122 CA/W33 | Basic Radial Load Rating-Static SCO:204000 N; Type:300-RDM Series (from; Basic Radial Load Rating-Dynamic DC:229000 N; B:49.00 mm; Fillet Radius rb:1.00 mm; Speed Rating-Open and Shielded-Grease OSG:6400 rpm; D:225.0000 mm; d:105.000 mm; Speed Rating-Open and Shielded-Oil OSO:9500 rpm; Fillet Radius ra:2.50 mm; |
| 23944CAF3/C3W33 23944CA/W33 Bearing | Calculation factor e:0.68; d2:57.9 mm; D:80 mm; db max.:57.3 mm; Basic dynamic load rating C:14.8 kN; Calculation factor fHC:1.01; B:16 mm; da max.:59.7 mm; Static axial stiffness, preload class B:173 N/µm; Static axial stiffness, preload class A:115 N/µm; |
| 23038CA/W33 Bearing | d:17 mm; B:20 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.013 kg; F:20 mm; |
| 22308CA/W33 22308CA 53608K 53608 Spherical Roller Bearing | Basic Dynamic Radial Load Rating C:13000 N; Fillet Radius ra:0.60 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; B:10.00 mm; Accessories:One Shield; Sealed Speed Rating n3:3600 rpm; D:100.0000 mm; Oil Speed Rating Open/Shielded n2:7000 rpm; d:80.000 mm; Basic Static Radial Load Rating Co:13700 N; |
| 22352 22352C/W33 22352 CAK/C3W33 Spherical Roller Bearing | Ca min.:10 mm; B:171.053 mm; ra max.:7 mm; D:546.1 mm; Da max.:505 mm; Calculation factor Y0:0.9; Basic static load rating C0:5600 kN; da max.:354 mm; Limiting speed:1100 r/min; Fatigue load limit Pu:415 kN; |
| 294/670 294/670EM Extruder Machinery Bearing | Associated spanner (Hook spanner in accordance with DIN 1810):HN 8-9; B:22 mm; h:2.5 mm; Grub (set) / Locking screw size:M 4; G:M 40x1.5; d1:58 mm; Recommended tightening torque:4.2 N·m; Mass:0.27 kg; b:6 mm; d5:62 mm; |