| No. | Brand | N | U | T | K | J | F | L | E |
| 3-18mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| R900904406 | Rexroth | - | - | - | - | - | - | - | - |
| 71913CDGA/P4AVT105 | - | - | - | - | - | - | - | - | - |
| (TM32-50D-V001) | - | - | - | - | - | - | - | - | - |
| 3302B | - | - | 20 mm | - | - | - | - | - | - |
| SSUPBA12, | Thomson | - | - | - | - | - | - | - | - |
| 500mm | - | - | - | - | - | - | - | - | - |
| 40 | - | - | - | - | - | - | - | - | - |
| 160x170x46 | INA | - | - | - | - | - | - | - | - |
| 6704 | - | - | - | - | 6 mm | - | - | - | - |
| 7319BEGAM | - | - | - | - | - | - | - | - | - |
| 6005 | - | - | - | - | - | - | - | - | - |
| +.026mm | - | - | - | - | - | - | - | 149 mm | - |
| 3% | - | - | - | - | - | - | - | - | - |
| 20 | - | - | - | - | - | - | - | - | - |
| (7296MA | - | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| Listing713650090 | fag | - | - | 22.75 mm | - | - | - | - | - |
| 61808-2Z-HLU | INA | - | - | - | - | - | - | - | - |
| 24124CA/W33, 24124CAK30/W33 Spherical Roller Bearing | End plug (suffix Y):EPR 7; PosiTrac Plus contact element:2 x B10724-37; R2:21.431 mm; A2:120.65 mm; Bearing:22215 EK; Cap bolt recommended tightening torque:149.1 N·m; h:28.575 mm; Housing:SSAFS 515; Da:130 mm; Max. speed for PosiTrac Plus seal:2350 r/min; |
| 23040 Sphercial Roller Bearing 200x310x82mm | Dimension D2:2.7500 in; Dimension S1:0.8750 in; Dimension C:3.5000 in; Width A:1.6250 in; Shaft Diameter D:1 3/16 in; Basic Static Radial Load Rating Co:2250 lbf; Basic Dynamic Radial Load Rating:3510 lbf; Dimension B:4.1250 in; Dimension J:1.6250 in; Dimension G:0.3750 in; |
| 238/1180CAKF1A/W20 238/1180 Spherical Roller Bearing | Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; da:84.138 mm; J max.:333.375 mm; Da:180 mm; Adapter sleeve assembly:SNW 20x3.5/16; Initial grease fill:365.71 g; PG:1/4 NPT; P90°:81.4 kN; Mass pillow block:28.1 kg; |
| 22319E1A.M.C3 Spherical Roller Bearing | rb max.:2.5 mm; C:27 mm; Reference speed:3600 r/min; D:145 mm; Ca min.:6 mm; Mass bearing:2.16 kg; Limiting speed:4300 r/min; d1 ≈:117.18 mm; T:35 mm; a:32.691 mm; |
| Spherical Roller Bearing 22319CC/W33 | Shaft washer:WS 89413; B:15 mm; Basic dynamic load rating C:355 kN; H:45 mm; Limiting speed:2200 r/min; Mass bearing:3.52 kg; ra max.:2 mm; Reference speed:1100 r/min; d1:140 mm; Minimum axial load factor A:0.15; |
| 24048CA/W33 24048CAK/W33 Bearing | Calculation factor kr:640; D1 ≈:612 mm; C:450 mm; K:9 mm; D:670 mm; B:450 mm; r3,4 min.:5 mm; b:16.7 mm; Design variant/feature:BC4.10/W33GWI; d:500 mm; |
| Spherical Roller Bearing 23056B.MB.C3, 23056CA/W33/C3 | B:36.00 mm; Grease Speed Rating Open/Shielded n1:2600 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:142000 N; Accessories:Snap-Ring; Basic Static Radial Load Rating Co:153000 N; D:190.0000 mm; Oil Speed Rating Open/Shielded n2:3200 rpm; d:105.000 mm; |
| Spherical Roller Bearing 22209CA 22209CAK 22209CA/W33 | Fw:24 mm; U:10 mm; Basic static load rating C0:15 kN; Limiting speed:19000 r/min; Fatigue load limit Pu:1.73 kN; Basic dynamic load rating C:9.35 kN; Reference speed:17000 r/min; Ew:28 mm; Mass needle roller and cage assembly:0.0085 kg; |
| 292/750M Bearing | d:384.175 mm; Mass bearing:321 kg; Calculation factor Y0:2; D:546.1 mm; Calculation factor e:0.33; Fatigue load limit Pu:1290 kN; r3,4 min.:1.5 mm; Comparative radial load rating CF:1730 kN; D1 ≈:520 mm; Basic dynamic load rating C:6440 kN; |
| 232/750 CA W33 C3 Spherical Roller Bearing | Basic Static Radial Load Rating Co:340000 N; D:200.0000 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2400 rpm; B:76.00 mm; Basic Dynamic Radial Load Rating C:296000 N; Oil Speed Rating n2:2900 rpm; d:110.000 mm; Fillet Radius ra:2.00 mm; |
| 23132MB/W33 23132CC/W33+H3132 Bearing | Limiting speed:1000 r/min; da min.:426 mm; Da max.:624 mm; b:16.7 mm; F:463 mm; ra max.:5 mm; D:650 mm; da max.:456 mm; Reference speed:800 r/min; B:250 mm; |
| 29472 29472EM Spherical Roller Thrust Bearing | J1:47.625 mm; H2:41.275 mm; A1:99.219 mm; J max.:225.425 mm; H:144.463 mm; da:61.913 mm; Limiting speed:3800 r/min; Basic dynamic load rating C:147 kN; Attachment bolt diameter G:15.875 mm; S:0.794 mm; |
| 23248CA/W33 23248CAK/W33+H2348 Bearing | Basic Dynamic Radial Load Rating C:22500 N; Basic Static Radial Load Rating Co:14600 N; Sealed Speed Rating n3:8500 rpm; Accessories:Shield & Seal; Fillet Radius ra:1.00 mm; d:20.000 mm; D:52.0000 mm; Oil Speed Rating n2:12000 rpm; B:22.20 mm; Grease Speed Rating n1:8500 rpm; |
| Spherical Roller Bearing 24036, 24036/W33, 24036CCK30/W33, 24036CAK30/W33 | Accessories:Seal & Snap-Ring; Sealed Speed Rating n3:1500 rpm; Oil Speed Rating Open/Shielded n2:2800 rpm; d:170.000 mm; B:42.00 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; D:260.0000 mm; Basic Static Radial Load Rating Co:173000 N; Basic Dynamic Radial Load Rating C:168000 N; Fillet Radius ra:2.00 mm; |
| 21317CC Bearing 85x180x41mm | Basic static load rating C0:540 kN; r1,2 min.:4 mm; B:90 mm; C:88 mm; Fatigue load limit Pu:71 kN; D:200 mm; r, r3,4 min.:2 mm; Mass support roller:16.8 kg; Basic dynamic load rating C:391 kN; d1:102 mm; |
| Spherical Roller Bearing 22210E | D:170.0000 mm; Basic Static Radial Load Rating Co:49000 N; Grease Speed Rating n1:3200 rpm; B:58.00 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:135000 N; Oil Speed Rating n2:3800 rpm; d:80.000 mm; |
150 mm x 225 mm x 48 mm 24064CAK Bearing 320x480x160mm Video
32030-X-XL - MISUMI
Tapered roller bearings 320..-X, main dimensions to DIN ISO 355 / DIN 720, separable, adjusted or in pairs by FAG (32030-X-XL) - Select, configure, order
Tapered roller bearings - 32030-X-XL - medias - Schaeffler
Tapered roller bearings 32030-X-XL, main dimensions to DIN ISO 355 /. Radial load Axial load in one direction Not sealed Grease lubrication Oil lubrication
FAG Single row tapered roller bearing 32030-X-XL | ERIKS
FAG Single row tapered roller bearing 32030-X-XL. ERIKS item #: 12626154. EAN: 4054364298159. Manufacturer partnumber: 32030-X-XL. Price (Per piece):
FAG (Schaeffler) - 32030-X - Motion Industries
Buy FAG (Schaeffler) Tapered Roller Bearing Full Assemblies 32030-X direct from Motion Industries. Your proven service leader ... Mfr Description: 32030-X-XL
32030-X-XL FAG • ABF Store
32030-X-XL FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
Bearing 32030-X-XL (FAG) | Size and Specification | Bearings
Tapered roller bearings 32030-X-XL. Bearing number : 32030-X-XL. Size (mm) : 150x225x48. Brand : FAG. Bore Diameter (mm) : 150. Outer Diameter (mm) :
FAG 32030-x-xl Tapered Roller Bearing 32030XXL 150 X 225
Find many great new & used options and get the best deals for FAG 32030-x-xl Tapered Roller Bearing 32030XXL 150 X 225 X 48 Mm 32030 X XL at the best