| No. | Brand | N | U | T | K | J | F | L | E |
| 24124-c4 | - | - | - | - | - | - | - | - | - |
| 15*3W | - | - | - | - | - | - | - | - | - |
| Z2FS | Rexroth | - | - | - | - | - | - | - | - |
| 22318VA2 | SKF | - | - | 301.625 mm | - | - | - | - | - |
| 2003-2007 | koyo | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| A6 | - | - | - | - | - | - | - | - | - |
| E12, | - | - | - | - | - | - | - | - | - |
| 100%-synthetic | - | - | - | - | - | - | - | - | - |
| CH-48107 | - | - | - | - | - | - | - | - | - |
| H208 | SKF | - | - | - | - | - | - | - | - |
| 90%, | - | - | - | - | - | - | - | - | - |
| (VLA200544) | - | - | - | - | - | - | - | - | - |
| 6mm/9mm/12mm/18mm | - | - | - | - | - | - | - | - | - |
| 271333 | - | - | - | - | - | - | - | - | - |
| B2 | - | - | - | - | - | - | - | - | - |
| 10W | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| 48V | - | - | - | - | - | - | - | - | - |
| 1.5t~2.5t | INA | - | - | - | - | - | - | - | - |
| A10vso45/31 | Rexroth | - | - | - | - | - | - | - | - |
| 2007-2009 | koyo | - | - | - | - | - | - | - | - |
| VLR1800 | - | - | - | - | - | - | - | - | - |
| 1000 | - | - | - | - | - | - | - | - | - |
| 640 | - | - | - | - | - | - | - | - | - |
| S32L | RBC | - | - | - | - | - | 8 mm | - | - |
| HD250-7 | - | - | - | - | - | - | - | - | - |
| 9W | - | - | - | - | - | - | - | - | - |
| 35 mm x 55 mm x 10 mm 23236EK.TVPB+AH3236G Spherical Roller Bearings | Eye bolt:2 x 3/8-16 UNC; Cap bolt:5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; ba:53.975 mm; J max.:368.3 mm; Cap bolt, SAE grade:8; PG:1/4 NPT; Pa:22.2 kN; P180°:107 kN; N1:22.225 mm; Size (mm):35 mm x 55 mm x 10 mm ; |
| 23220CA Spherical Roller Bearing | Fillet Radius rb:1.50 mm; Grease Speed Rating n1:1000 rpm; B:160.00 mm; Basic Static Radial Load Rating Co:2000000 N; Basic Dynamic Radial Load Rating C:936000 N; d:280.000 mm; Fillet Radius ra:4.00 mm; D:500.0000 mm; Oil Speed Rating n2:1400 rpm; |
| 23230CC/W33, 23230CCK/W33 Spherical Roller Bearing | Calculation factor e:0.35; Limiting speed:4000 r/min; d2 ≈:98.3 mm; Basic dynamic load rating C:516 kN; b:8.3 mm; r1,2 min.:2.1 mm; B2 ≈:75 mm; Calculation factor Y0:1.8; K:4.5 mm; Calculation factor Y2:2.9; |
| 23122CAK/C3W33 23122CA Spherical Roller Bearing | Initial grease fill:765.45 g; Cap bolt, SAE grade:8; Max. speed for PosiTrac Plus seal:1300 r/min; R1:79.375 mm; P60°:185 kN; da:100 mm; P90°:111 kN; Lock nut:AN 20; db:114.3 mm; Cap bolt:2 x 1-8 UNC; |
| 190 mm x 340 mm x 92 mm Spherical Roller Bearing 22316CAK 22316CA/W33 | Misalignment factor k1:0.107; s2 max.:10.6 mm; s1 max.:17.4 mm; B1:90 mm; ra max.:2 mm; G:M 155x3; d2 ≈:173 mm; Basic static load rating C0:1320 kN; B2 ≈:101 mm; d1:145 mm; Size (mm):190 mm x 340 mm x 92 mm ; |
| 24092 ECA/W33 24092 ECAK30/W33 24092 ECC/W33 24092 ECCK30/W33 Spherical Roller Bearing | h:34.925 mm; P60°:49.4 kN; P180°:20 kN; Taconite seal (dc shaft position):TER 33; A1:79.375 mm; Cap bolt recommended tightening torque:149.1 N·m; H:161.925 mm; Taconite seal (db shaft position):TER 47; Lock washer:W 12; J max.:244.475 mm; |
| 21309CC/W33 Bearing | Pu:536 kN; Static (Cor):8.3 mm; with cylindrical bore:1 900 min-1; rs (min):3 mm; D:190 mm; with tapered bore:2 400 min-1; Dynamic (Cr):4.5 mm; B:64 mm; Grease:673 kN; d:90 mm; |
| 22324CC/W33 Bearing | r5 min.:1 mm; T:103 mm; Fatigue load limit Pu:106 kN; Calculation factor Y0:1.8; Calculation factor Y1:1.9; b:14 mm; Mass bearing pair:16.9 kg; Calculation factor e:0.35; Ca min.:6 mm; d:100 mm; |
| 24132C Spherical Roller Bearing | Accessories:Two Shields & Snap-R; Oil Speed Rating Open/Shielded n2:11000 rpm; B:17.00 mm; Basic Static Radial Load Rating Co:15300 N; d:35.000 mm; Oil Speed Rating n2:11000 rpm; Basic Dynamic Radial Load Rating C:25500 N; Sealed Speed Rating n3:6300 rpm; Grease Speed Rating n1:9000 rpm; Fillet Radius ra:1.00 mm; |
| 23240C Spherical Roller Bearing | Specific static load factor K0:300 N/mm²; Material constant KM:330; b1:10 mm; d:127 mm; da max.:144.5 mm; Lubricant:Maintenance free &nd; C:95.25 mm; Da max.:188.5 mm; Mass plain bearing:13.5 kg; da min.:135.5 mm; |
| Spherical Roller Bearing 22206 | R1:44.45 mm; End plug (suffix Y):EPR 6; S:3.969 mm; Bearing:22213 EK; P120°:17.8 kN; Cap bolt recommended tightening torque:81.3 N·m; PG:1/8 NPT; Stabilizing ring:SR-13-0; Cap bolt:2 x 1/2-13 UNC; Mass pillow block:10.8 kg; |
| 21317 21317E 21317EK Spherical Roller Bearing | End plug (suffix Y):EPR 27; Cap bolt, SAE grade:5; P180°:84.5 kN; L:466.725 mm; P150°:68.1 kN; Taconite seal (db shaft position):TER 136; Lock nut:AN 26; R2:36.513 mm; Mass pillow block:61.2 kg; Pa:31.2 kN; |
| 23218CAMKE4 Spherical Roller Bearings | G:M 85x2; B3:4 mm; d1:98 mm; Associated spanner:HN 17; h:3.5 mm; Mass lock nut:0.53 kg; Grub (set) screw size:M8; Recommended grub screw tightening torque:18 N·m; b:8 mm; Axial static load carrying capacity:190 kN; |
| 3.543 Inch | 90 Millimeter x 5.512 Inch | 140 Millimeter x 1.89 Inch | 48 Millimeter 24172CA/W33 Spherical Roller Bearing | Basic Static Radial Load Rating Co:425000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4100 rpm; d:180.000 mm; D:250.0000 mm; Basic Dynamic Radial Load Rating C:276000 N; B:66.00 mm; Oil Speed Rating n2:6200 rpm; Fillet Radius rb:1.00 mm; Size (mm):3.543 Inch | 90 Millimeter x 5.512 Inch | 140 Millimeter x 1.89 Inch | 48 Millimeter ; |
| 29424 29424E Spherical Roller Thrust Bearing | D:47.0000 mm; d:20.000 mm; Oil Speed Rating n2:50000 rpm; Grease Speed Rating n1:35000 rpm; Fillet Radius ra:1.00 mm; Fillet Radius rb:0.60 mm; B:14.00 mm; Basic Static Radial Load Rating Co:7800 N; Basic Dynamic Radial Load Rating C:13000 N; |
| 23044CC/W33 23044MB/W33 23040CA/W33 Spherical Roller Bearing | K:12 mm; α:20 °; b:22.3 mm; Basic static load rating C0:45000 kN; C:620 mm; B:620 mm; F:790 mm; r3,4 min.:3 mm; Fatigue load limit Pu:3000 kN; Calculation factor kr:620; |
Spherical Roller Bearings - NSK Americas
Spherical Roller Bearings - designed and manufacturered to withstand even the most demanding conditions
Rollway Spherical Roller Bearings - Regal Power Transmission
Spherical roller bearings are designed for heavy loads, shaft misalignment and deflection. View specifications, get downloads, and more
Spherical Roller Bearings | AST Bearings
Spherical Roller Bearings are designed to work in applications where severe misalignment exists whether from mounting or shaft deflection and with relatively
Spherical Roller Bearings | NTN Bearing
Spherical roller bearings are dedicated to extremely severe applications and must support high loads, severe misalignment, contaminated environments, shocks
Spherical roller bearings
Spherical roller bearings have two rows of symmetrical rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the
Spherical roller bearing - Wikipedia
A spherical roller bearing is a rolling-element bearing that permits rotation with low friction, and permits angular misalignment. Typically these bearings support a rotating shaft in the bore of the inner ring that may be misaligned in respect to the outer ring
Spherical Roller Bearing | The Timken Company
If you have challenges when managing high radial loads, use Timken® spherical roller bearings. Made to handle it all & designed to extended bearing life and
Spherical Roller Bearings | Roller Bearings | Products | NSK Global
Shown in the figures, types EA, C, CD, CA, which are designed for high load capacity, are available. Types EA, C, and CD have pressed steel cages; and type
Spherical roller bearings have their own places in the world of
Spherical roller bearings have their own places in the world of bearings. If you design or maintain machinery, this will help you find their best locations, often
FAG 54418U Bearing Video