No. | Brand | N | U | T | K | J | F | L | E |
8x14x4mm | - | 50 mm | - | - | - | - | - | - | - |
24024 | NSK | - | - | - | - | - | - | - | - |
P4 | - | - | - | - | - | - | - | - | - |
pc300-8 | - | - | - | - | - | - | 114 mm | - | - |
513022 | Timken | - | - | - | - | - | - | - | - |
28mm | - | - | - | - | - | - | - | 628.65 mm | - |
H8112C | - | - | - | - | - | - | - | - | - |
H208 | SKF | - | - | - | - | - | - | - | - |
2,JETTA | - | - | - | - | - | - | - | - | - |
1/4 | Parker | - | - | - | - | - | - | - | - |
1100- | - | - | - | - | - | - | - | - | - |
0704290 | - | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
RB210 | Nachi | - | - | - | - | - | - | - | - |
(10 | - | - | - | - | - | - | - | 130 mm | - |
30X90X23 | - | - | - | - | 7.5 mm | - | 558 mm | - | - |
2x | TRW | - | - | - | - | - | - | - | - |
DBETE-52/200G24NK31M | Rexroth | - | - | - | - | - | - | - | - |
(YB-G-1) | - | - | - | - | - | - | - | - | - |
33110 | - | - | - | - | - | - | - | - | - |
6202-2Z | SKF | - | - | - | - | - | - | 869.95 mm | - |
4 | Parker | - | - | - | - | - | - | - | - |
17X47X14 | - | - | - | - | - | - | - | - | - |
Japan-8x10-B&W-Still-Tony | - | - | - | - | - | - | - | - | - |
40lpm | - | - | - | - | - | - | - | - | - |
N18W | - | - | - | - | - | - | - | 225.425 mm | - |
1200*1000*150 | - | - | - | - | - | - | - | - | - |
90mm | - | - | - | - | - | - | - | - | - |
6312 | fag | - | - | - | - | - | - | - | - |
23130MB/W33 23130CC/W33+H3130 Bearing | Bearing:22217 EK; N1:19.05 mm; Taconite seal:TER 54; P150°:28.5 kN; J max.:279.4 mm; ba:35.719 mm; Cap bolt:2 x 5/8-11 UNC; Initial grease fill:110.56 g; Cap bolt recommended tightening torque:298.3 N·m; Max. speed for Taconite seal:1050 r/min; |
23060MBW33/C3 23060CAW33 Spherical Roller Bearing | Cap bolt, SAE grade:5; Bearing:22222 EK; h:45.244 mm; Taconite seal:TER 109; Adapter sleeve assembly:SNW 22x3.15/16; Stabilizing ring:SR-22-19; Cap bolt:2 x 3/4-10 UNC; Ca:62.789 mm; End plug (suffix Y):EPR 13; S:4.763 mm; |
239/750CA/W33, 239/750CAK/W33 Spherical Roller Bearing | Taconite seal (dc shaft position):TER 164; Lock nut:AN 40; h:62.706 mm; P60°:364 kN; S:4.763 mm; R1:122.237 mm; Cap bolt recommended tightening torque:271.2 N·m; Eye bolt:2 x 1/2-13 UNC; Lock washer:W 40; R2:42.862 mm; |
22224CC/W33 Spherical Roller Bearing | d:105 mm; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ max.:0.15; Coefficient of friction µ min.:0.08; h:106.5 mm; B:80 mm; a:4 mm; Mass bushing:2.54 kg; Tolerance shaft:e7; Tolerance housing:H7; |
22244CAK 22244 Spherical Roller Bearing | r1,2 min.:1.1 mm; d1:125 mm; Mass shaft washer:0.79 kg; d:70 mm; B:12 mm; |
BS2-2309-2CS Double Sealed Spherical Roller Bearing | Fw:28 mm; Ew:33 mm; U:17 mm; Fatigue load limit Pu:4.05 kN; Reference speed:14000 r/min; Limiting speed:16000 r/min; Basic static load rating C0:33.5 kN; Basic dynamic load rating C:19 kN; Mass needle roller and cage assembly:0.017 kg; |
23938CC/W33 23938CA/W33 23938CCK/W33 23938CAK/W33 Spherical Roller Bearing | Stabilizing ring:2 x SR-1615; A2:223.838 mm; RG:3/8 NPT; A1:98.425 mm; P150°:40.5 kN; Cap bolt:2 x 5/8-11 UNC; J min.:263.525 mm; Cap bolt recommended tightening torque:298.3 N·m; Da:160 mm; H2:41.275 mm; |
22317CAKF3/W33 22317CAKF3 Spherical Roller Bearing | Reference speed:4000 r/min; da max.:114 mm; da min.:90.6 mm; Basic dynamic load rating C:275 kN; Operating clearance factor k2:0.105; d2 ≈:103 mm; B1:52 mm; d1:80 mm; r1,2 min.:2 mm; D:150 mm; |
24036 Bearing 180x280x100mm | P120°:84.5 kN; H1:190.5 mm; h:66.675 mm; Appropriate attachment bolt size G:1 in; Mass pillow block:146 kg; P60°:234 kN; Bearing:22330 CCK/W33; R2:41.275 mm; Labyrinth ring:2 x LOR 126; P180°:89 kN; |
24032CAK/W33 Spherical Roller Bearing | d:300.000 mm; Grease Speed Rating Open/Shielded n1:1200 rpm; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:1500 rpm; Basic Static Radial Load Rating Co:500000 N; Fillet Radius ra:3.00 mm; B:74.00 mm; Sealed Speed Rating n3:780 rpm; D:460.0000 mm; Basic Dynamic Radial Load Rating C:358000 N; |
221.32.3550 Excavator Slewing Bearing | Insert Bearing IB:ZMaRC; Shaft Diameter D:1 1/4 in; Dimension L:4.3125 in; Dimension D2:2.6875 in; Width A:1.3750 in; Dimension H:1.0000 in; Dimension C:3.5000 in; Dimension B:4.1250 in; Dimension J:0.3125 in; Weight W:1.10 lb; |
22311MB/C3W33, 22311MBK/C3W33 Spherical Roller Bearing | Basic Dynamic Radial Load Rating C:31200 N; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:5600 rpm; Basic Static Radial Load Rating Co:12200 N; B:22.00 mm; D:110.0000 mm; Oil Speed Rating n2:6700 rpm; d:60.000 mm; |
IJK Spherical Roller Bearing 24048CC/C3W33 | Pu:1.407 kN; Static (Cor):30.959 kN; ra:1 max; d:70 mm; Da:103 max; Dynamic (Cr):37.960 kN; D:110 mm; rs:1.1 mm; Weight:0.604 kg; Oil:6 700 min-1; |
23180CAK/W33 Spherical Roller Bearing | d1:570 mm; Nut for removal:HM 31/630; Mass withdrawal sleeve:86.5 kg; G2:G 1/4; Hydraulic nut:HMV 126 E; G:Tr 630x6; A:9 mm; B2:336 mm; B1:310 mm; d:600 mm; |
22232 CCK/W33 + AH 3132 G BEARING 150*290*80MM | Limiting speed:8000 r/min; Reference speed:7000 r/min; Fatigue load limit Pu:13.7 kN; Ew:66 mm; Fw:60 mm; Basic dynamic load rating C:44 kN; Basic static load rating C0:112 kN; Mass needle roller and cage assembly:0.1 kg; U:33 mm; |
23138CC/W33, 23138MB/W33, 23138CA/W33, 23138Ebearing | db min.:252 mm; d1 ≈:271.7 mm; Db min.:304 mm; Da min.:291 mm; Basic dynamic load rating C:608 kN; rb max.:3.3 mm; Limiting speed:1800 r/min; Dimension series:LM 545800; d:234.848 mm; Da max.:299 mm; |
OKB 22236CCK/W33 Spherical Roller Bearing Video