| No. | Brand | N | U | T | K | J | F | L | E |
| 2350vt | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 640 | Parker | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 40x62x12 | - | - | - | - | - | - | - | - | - |
| 1 | Bower | - | - | - | - | - | - | - | - |
| 20 | - | - | - | - | - | - | - | - | - |
| NUP220 | NSK | - | - | - | - | - | - | - | - |
| H21 | - | - | - | - | - | - | - | - | - |
| 29% | INA | - | - | - | - | - | - | - | - |
| 7447-41-8 | - | - | - | - | 6.5 mm | - | 159.375 mm | - | - |
| 271333 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| (Zhs545) | - | - | - | - | - | - | - | - | - |
| 6207-2RS | - | - | - | - | - | - | - | 1000 mm | - |
| 32005J | koyo | - | - | - | - | - | - | - | - |
| 125 | - | - | - | - | 4.5 mm | - | - | - | - |
| SE5 | - | - | - | - | - | - | - | - | - |
| AL205 | NTN | - | - | - | - | - | - | - | - |
| 4-35X12.50R20LT | - | - | - | - | - | - | - | - | - |
| DR400 | - | - | - | - | - | - | - | - | - |
| NJ324ECP | - | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| 550138270120 | Danfoss | - | - | - | - | - | - | - | - |
| 08123-62027 | - | - | - | - | - | - | - | - | - |
| 13 | - | - | - | - | - | - | - | - | - |
| 23938CA/W33 Spherical Roller Bearing | Pa:620 kN; da:163.512 mm; s:15 mm; Q120°:1800 kN; Eye bolt, size:2 x M 16; J1:110 mm; Oil level, min.:50 mm; Mass housing:77.5 kg; P120°:850 kN; Cap bolt, rec. tightening torque:350 N·m; |
| 22320CC/W33, 22320CCK/W33 Spherical Roller Bearing | d:70.000 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Basic Static Radial Load Rating Co:32500 N; Accessories:Two Shields; D:110.0000 mm; Basic Dynamic Radial Load Rating C:41000 N; Oil Speed Rating Open/Shielded n2:7000 rpm; B:20.00 mm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:3600 rpm; |
| 24036MB/W33 24036CC/W33 Bearing | B:94.00 mm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:8000 rpm; Grease Speed Rating n1:5500 rpm; Basic Static Radial Load Rating Co:400000 N; Basic Dynamic Radial Load Rating C:345000 N; Fillet Radius rb:1.00 mm; d:100.000 mm; D:215.0000 mm; |
| NTN UCP306 Pillow Block Bearings | Grease Speed Rating n1:12000 rpm; B:15.9 mm; D2R:33.200 mm; Basic Static Radial Load Rating Co:6800 N; Oil Speed Rating n2:17000 rpm; D:35.0000 mm; Basic Dynamic Radial Load Rating C:11400 N; d:15.000 mm; Accessories:No Shield, no Seal,; Fillet Radius ra:0.64 mm; |
| 21312CC Good Quality Spherical Roller Bearing | Sealed Speed Rating n3:3100 rpm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:108000 N; B:35.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:69500 N; D:150.0000 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; d:60.000 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; |
| 24138 CC/W33 24138 CCK30/W33 Bearing | Oil Speed Rating Open/Shielded n2:20000 rpm; d:20.000 mm; D:42.0000 mm; Sealed Speed Rating n3:11000 rpm; Grease Speed Rating Open/Shielded n1:17000 rpm; Basic Static Radial Load Rating Co:5000 N; Fillet Radius ra:0.64 mm; B:12.00 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:9360 N; |
| 22238CC/W33 Spherical Roller Bearing | Cap bolt, SAE grade:5; A1:158.75 mm; Adapter sleeve assembly:SNW 3036x6.3/8; Labyrinth ring:2 x LOR 147; Pa:40 kN; P120°:85.9 kN; Stabilizing ring:2 x 38151-36; Bearing limiting speed:2600 r/min; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:94.8 kg; |
| 22228CA/W33, 22228CAK/W33 Spherical Roller Bearing | Ca:57.785 mm; Mass pillow block:17.1 kg; Cap bolt recommended tightening torque:298.3 N·m; Initial grease fill:175.77 g; Cap bolt, SAE grade:8; Housing:FSAF 613; P120°:21.8 kN; P90°:36 kN; H:167.481 mm; ba:32.544 mm; |
| 22322CA/W33 22322CA 53622H Spherical Roller Bearing | Accessories:One Seal & Snap-Ring; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:6300 rpm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:53900 N; d:50.000 mm; Sealed Speed Rating n3:4800 rpm; Grease Speed Rating n1:4800 rpm; B:30.20 mm; Basic Static Radial Load Rating Co:58500 N; |
| 22210CAK/W33 Spherical Roller Bearing | Fillet Radius ra:1.50 mm; Oil Speed Rating n2:7800 rpm; D:100.0000 mm; Basic Static Radial Load Rating Co:37500 N; d:55.000 mm; B:21.00 mm; Basic Dynamic Radial Load Rating C:48800 N; Grease Speed Rating n1:6000 rpm; |
| 23340CAF3 Spherical Roller Bearing | Mass needle roller:0.88 g; Lw:15.8 mm; Dw:3 mm; r2 max.:0.8 mm; r1,2 min.:0.2 mm; r1 max.:0.6 mm; |
| 24024CA/W33 24024CA 4053124K 4053124 Spherical Roller Bearing | b:22.3 mm; F:557 mm; Calculation factor kr:0.35; K:12 mm; Design variant/feature:NNU K30/W33; da max.:545 mm; Da max.:757 mm; D1 ≈:701 mm; Reference speed:630 r/min; ra max.:6 mm; |
| 22238CA/W33, 22238CAK/W33 Spherical Roller Bearing | Calculation factor Y0:1.1; D:88.9 mm; Cb min.:4 mm; Reference speed:6300 r/min; B:22.225 mm; Ca min.:4 mm; ra max.:3.5 mm; d1 ≈:66.25 mm; a:16.326 mm; r1,2 min.:3.5 mm; |
| Spherical Roller Bearing 22219CA/W33, 22219MB/W33 | Calculation factor Y:2; db min.:27.5 mm; Limiting speed:14000 r/min; C:13 mm; Db min.:47 mm; Da max.:45.5 mm; Basic static load rating C0:32.5 kN; Dimension series:2FB; Cb min.:3 mm; Mass bearing:0.17 kg; |
| 23136CAF3 23136CAK Spherical Roller Bearing | D:45 mm; Coefficient of friction µ min.:0.05; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; Tolerance shaft:h8; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; d:25 mm; Coefficient of friction µ max.:0.1; B:35 mm; |
| 22252CA/W33, 22252CAK/W33 Spherical Roller Bearing | l3 min.:17 mm; d4 ≈:17 mm; l7 min.:13 mm; d2 max.:33 mm; Size bolt with internal hexagon:M 5; G:M 12x1.25; Material constant KM:330; Tightening torque bolt with internal hexagon:5.5 N·m; C1 max.:11 mm; Mass rod end:0.11 kg; |
Spherical roller bearings
Spherical roller bearings have two rows of symmetrical rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the
Spherical roller bearing - Wikipedia
A spherical roller bearing is a rolling-element bearing that permits rotation with low friction, and permits angular misalignment. Typically these bearings support a rotating shaft in the bore of the inner ring that may be misaligned in respect to the outer ring
Spherical Roller Bearings | NTN Bearing
Spherical roller bearings are dedicated to extremely severe applications and must support high loads, severe misalignment, contaminated environments, shocks
Spherical Roller Bearings | AST Bearings
Spherical Roller Bearings are designed to work in applications where severe misalignment exists whether from mounting or shaft deflection and with relatively
Spherical Roller Bearings - NSK Americas
Spherical Roller Bearings - designed and manufacturered to withstand even the most demanding conditions
Rollway Spherical Roller Bearings - Regal Power Transmission
Spherical roller bearings are designed for heavy loads, shaft misalignment and deflection. View specifications, get downloads, and more
Spherical Roller Bearing | The Timken Company
If you have challenges when managing high radial loads, use Timken® spherical roller bearings. Made to handle it all & designed to extended bearing life and
Spherical roller bearings have their own places in the world of
Spherical roller bearings have their own places in the world of bearings. If you design or maintain machinery, this will help you find their best locations, often
Spherical Roller Bearings | Roller Bearings | Products | NSK Global
Shown in the figures, types EA, C, CD, CA, which are designed for high load capacity, are available. Types EA, C, and CD have pressed steel cages; and type
Spherical Roller Bearing 22311CC/W33 22311CA/W33 22311MB/W33 Video