| No. | Brand | N | U | T | K | J | F | L | E |
| 71906CB/P4A | - | - | - | - | - | - | - | - | - |
| Wpa200 | - | - | - | - | - | - | - | - | - |
| F694ZZ | - | - | - | - | - | - | - | - | - |
| 1/4 | Parker | - | - | - | - | - | - | - | mm |
| 12mm | - | - | - | - | - | - | - | - | - |
| NJ314-ECJ/C3 | SKF | - | - | - | - | - | - | 330.2 mm | - |
| 375cc | - | - | - | - | - | - | - | - | - |
| 618/670 | - | - | - | - | - | - | - | - | - |
| 3mm/5mm/9mm | - | - | - | - | - | - | - | - | - |
| 933-11832-80-00 | - | - | - | - | - | - | - | - | - |
| 58 | - | - | - | - | - | - | - | - | - |
| ev220x | Danfoss | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 100 | Danfoss | - | - | - | - | - | - | - | - |
| 16-30 | - | - | - | - | - | - | - | 330.2 mm | - |
| LSL19 | - | - | - | - | - | - | - | - | - |
| GS1842 | - | - | - | - | - | - | - | - | - |
| P3U2E32N | Rexnord | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 20L | - | - | - | - | - | - | - | - | - |
| #1986----MADE | Bower | - | - | - | - | - | - | - | - |
| 394 | koyo | - | - | - | - | - | - | - | - |
| 305S | TRW | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 900 | fag | - | - | - | - | - | - | - | - |
| IP67 | - | - | - | - | - | - | - | 330.2 mm | - |
| SX011836 | INA | - | - | - | - | - | - | - | - |
| 1200X1000mm | - | - | - | - | - | - | - | - | - |
| RKS.21.0411 Excavator Slewing Bearing | Fillet Radius ra:2.00 mm; Accessories:Shield & Seal & Snap; Basic Static Radial Load Rating Co:186000 N; B:63.50 mm; d:70.000 mm; Oil Speed Rating n2:3800 rpm; Sealed Speed Rating n3:2800 rpm; Grease Speed Rating n1:2800 rpm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:172000 N; |
| 23972CAW33C3 Spherical Roller Bearing | B:10.00 mm; Fillet Radius ra:0.64 mm; d:12.000 mm; D:32.0000 mm; Oil Speed Rating n2:28000 rpm; Basic Dynamic Radial Load Rating C:6890 N; Accessories:Two Seals; Sealed Speed Rating n3:15000 rpm; Oil Speed Rating Open/Shielded n2:28000 rpm; Grease Speed Rating Open/Shielded n1:22000 rpm; |
| 294/750 294/750EF Power Generation Bearing | Max. speed for Taconite seal:425 r/min; Pa:48.9 kN; Ca:95.809 mm; RG:3/4 NPT; Cap bolt, SAE grade:8; H1:179.4 mm; ba:74.612 mm; Mass pillow block:156 kg; h:49.212 mm; da:180.975 mm; |
| 29328 Bearing 140×240×60mm | B:92 mm; d:190 mm; rs (min):4 mm; with tapered bore:1 200 min-1; Static (Cor):16.7 mm; Grease:1550 kN; with cylindrical bore:940 min-1; Dynamic (Cr):9 mm; Oil:141.110 kN; Pu:1040 kN; |
| 23230C 23230CA/W33 23230CA Spherical Roller Bearing | Grease Speed Rating n1:1200 rpm; D:420.0000 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; d:230.000 mm; Oil Speed Rating n2:1500 rpm; B:136.00 mm; Basic Static Radial Load Rating Co:1340000 N; Basic Dynamic Radial Load Rating C:715000 N; |
| 23022CAF3/W33 23022CAF3 Spherical Roller Bearing | Fatigue load limit Pu:112 kN; H:115 mm; Minimum load factor A:5600; D:1250 mm; Basic dynamic load rating C:1010 kN; Basic static load rating C0:10400 kN; d1 ≈:1244 mm; Da max.:1138 mm; d:1060 mm; Limiting speed:400 r/min; |
| 24072CA 24072 Spherical Roller Bearing | D:130 mm; r1s (min):1.5 mm; Pu:36.190 kN; b:mm; d2:75 mm; Static (Coa):299 kN; B:41.28 mm; b1:mm; rs (min):1.5 mm; s:4.5 mm; |
| 23952CA/W33 Spherical Roller Bearing 260×360×75mm | Fillet Radius ra:1.00 mm; Accessories:Shield & Seal & Snap; Basic Static Radial Load Rating Co:29000 N; Grease Speed Rating n1:6300 rpm; Sealed Speed Rating n3:6300 rpm; d:30.000 mm; Oil Speed Rating n2:8500 rpm; Basic Dynamic Radial Load Rating C:41600 N; B:30.20 mm; D:72.0000 mm; |
| 23232CC/W33 23232CA/W33 23232CCK/W33 23232CAK/W33 Spherical Roller Bearing | d:12.000 mm; Oil Speed Rating Open/Shielded n2:32000 rpm; Basic Static Radial Load Rating Co:2360 N; Sealed Speed Rating n3:17000 rpm; Basic Dynamic Radial Load Rating C:5070 N; Fillet Radius ra:0.30 mm; Accessories:Two Seals; B:8.00 mm; Grease Speed Rating Open/Shielded n1:26000 rpm; D:28.0000 mm; |
| Spherical Roller Bearing 22313CAK 22313CA/W33 | D:420.0000 mm; Accessories:One Seal; Basic Static Radial Load Rating Co:255000 N; Basic Dynamic Radial Load Rating C:178000 N; Fillet Radius ra:2.00 mm; B:38.00 mm; Grease Speed Rating Open/Shielded n1:1200 rpm; Sealed Speed Rating n3:0 rpm; d:340.000 mm; Oil Speed Rating Open/Shielded n2:1500 rpm; |
| 23038 Sphercial Roller Bearing 190x290x75mm | Permissible sliding velocity v max.:5 m/s; Mass bushing:0.38 kg; Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; Tolerance housing:H7; B:50 mm; Permissible sliding velocity v min.:0.25 m/s; Specific static load factor K0:20 N/mm²; Tolerance shaft:h8; d:60 mm; |
| 23192, 23192CA, 23192CAK, 23192CAC/W33 Spherical Roller Bearing | Stabilizing ring:2 x A8897; R1:122.237 mm; Adapter sleeve assembly:SNP 3048x8.7/16; h:56.356 mm; RG:1 NPT; Max. speed for PosiTrac Plus seal:640 r/min; ba:89.694 mm; J max.:635 mm; Bearing:23048 CCK/W33; Da:359.999 mm; |
| Spherical Roller Bearing 22217E 22217MB/W33 | B:17.46 mm; Fillet Radius ra:0.64 mm; D:40.0000 mm; d:17.000 mm; Accessories:Synthetic Rubber Sea; Sealed Speed Rating n3:12000 rpm; Oil Speed Rating Open/Shielded n2:20000 rpm; Basic Static Radial Load Rating Co:4500 N; Grease Speed Rating Open/Shielded n1:17000 rpm; Basic Dynamic Radial Load Rating C:9560 N; |
| 29334 29334E Spherical Roller Thrust Bearing | B:450 mm; Mass bearing:500 kg; r3,4 min.:2 mm; Calculation factor kr:620; D1 ≈:621.6 mm; K:12 mm; Basic static load rating C0:22000 kN; Basic dynamic load rating C:8250 kN; F:550 mm; Design variant/feature:BC4.10/W33WI; |
| 23130 CC/W33 Bearing 150×250×80mm | Oil Speed Rating Open/Shielded n2:4000 rpm; d:80.000 mm; Fillet Radius ra:2.50 mm; B:48.00 mm; Basic Static Radial Load Rating Co:125000 N; Grease Speed Rating Open/Shielded n1:3400 rpm; Sealed Speed Rating n3:2300 rpm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:163000 N; D:200.0000 mm; |
| 21305 CC Cylindrical Bore Bearing | d:25 mm; Mass adapter sleeve assembly:0.088 kg; Lock nut:KMFE 5; B:10.5 mm; d3:38 mm; G:M 25x1.5; d1:19.05 mm; B1:29 mm; |
Spherical Roller Bearing | The Timken Company
If you have challenges when managing high radial loads, use Timken® spherical roller bearings. Made to handle it all & designed to extended bearing life and
Spherical roller bearings
Spherical roller bearings have two rows of symmetrical rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the
Spherical roller bearing - Wikipedia
A spherical roller bearing is a rolling-element bearing that permits rotation with low friction, and permits angular misalignment. Typically these bearings support a rotating shaft in the bore of the inner ring that may be misaligned in respect to the outer ring
Spherical Roller Bearings | AST Bearings
Spherical Roller Bearings are designed to work in applications where severe misalignment exists whether from mounting or shaft deflection and with relatively
Spherical Roller Bearings | Roller Bearings | Products | NSK Global
Shown in the figures, types EA, C, CD, CA, which are designed for high load capacity, are available. Types EA, C, and CD have pressed steel cages; and type
Rollway Spherical Roller Bearings - Regal Power Transmission
Spherical roller bearings are designed for heavy loads, shaft misalignment and deflection. View specifications, get downloads, and more
Spherical roller bearings have their own places in the world of
Spherical roller bearings have their own places in the world of bearings. If you design or maintain machinery, this will help you find their best locations, often
Spherical Roller Bearings | NTN Bearing
Spherical roller bearings are dedicated to extremely severe applications and must support high loads, severe misalignment, contaminated environments, shocks
Spherical Roller Bearings - NSK Americas
Spherical Roller Bearings - designed and manufacturered to withstand even the most demanding conditions
23296CAKF3 23296CAF3 23296 Spherical Roller Bearing Video