| No. | Brand | N | U | T | K | J | F | L | E |
| YT10V00016F1 | INA | - | - | - | - | - | - | - | - |
| 23pcs | - | - | - | - | - | - | - | 539.75 mm | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| 10cm-200cm | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 4636857 | INA | - | - | - | - | - | - | - | - |
| 570 | - | - | - | - | - | - | - | - | - |
| 50kg/bag | - | - | - | - | - | - | - | - | - |
| 13 | - | - | - | - | - | - | - | - | - |
| 13 | - | - | - | - | - | - | - | - | - |
| MU5208UM | Bower | - | - | - | - | - | - | - | - |
| 22315 | SKF | - | - | - | - | - | - | - | - |
| EX300-5 | - | - | - | - | - | - | - | - | - |
| C50L | NTN | - | - | - | - | - | - | - | - |
| 5050 | - | - | - | - | - | - | - | - | - |
| MCY14-1B | Rexroth | - | - | - | - | - | - | - | - |
| 12mm | INA | - | - | 57 mm | - | - | - | - | - |
| 21% | - | - | - | - | - | - | 84 mm | - | mm |
| W1504FA | NSK | - | - | - | - | - | - | - | - |
| 6200 | - | - | - | - | - | - | - | - | - |
| adg080164 | - | - | - | - | - | - | - | - | mm |
| 32006J | koyo | - | - | - | - | - | - | - | - |
| #2688 | - | - | - | - | 12 mm | - | - | - | - |
| 2910 | Danfoss | - | - | - | - | - | - | - | - |
| 8282/6565/5656/9292 | - | - | - | - | - | - | - | - | - |
| 22226CA/W33 22226CA/W33 Spherical Roller Bearing | N1:22.225 mm; Cap bolt, SAE grade:8; H2:44.45 mm; A1:111.125 mm; Ca:69.799 mm; Stabilizing ring:SR-20-17; Cap bolt recommended tightening torque:515.2 N·m; P60°:104 kN; J min.:295.275 mm; dc:80.975 mm; |
| 241/500ECA/W33 241/500ECAK30/W33 241/500 ECC/W33 241/500 ECCK30/W33 Mining And Construction Bearing | D:1470 mm; Weight:3000 ; Bearing designation:PLC 512-66 ; B1:345 mm; Dynamic (Cr):15184 kN; Static (Cor):37595 ; Pu:2156.830 kg; d:1000 mm; B:530 mm; |
| Spherical Roller Bearing 22256B.MB.C3 | d4 ≈:92 mm; l3 min.:80 mm; l7 min.:78 mm; Specific dynamic load factor K:100 N/mm²; B:49 mm; r1 min.:1 mm; l5 ≈:40 mm; dk:92 mm; d:70 mm; α:6 °; |
| SPherical Roller Bearing 241/560CA | B1:72.619 mm; d1:87.313 mm; Hydraulic nut:HMVC 20E; Mass adapter sleeve assembly:2 kg; G:99.517 mm; B4:21.438 mm; Threads per inch:12; d:100 mm; Lock washer:W 20; Sleeve:S 20x3.7/16; |
| 23032CK 23032C 3053132 3153132 Spherical Roller Bearing | Fatigue load limit Pu:7.65 kN; Dimension series:3DB; a:16.094 mm; Reference speed:7000 r/min; Basic dynamic load rating C:75.8 kN; D:80 mm; r3,4 min.:1.5 mm; C1:4 mm; B:18 mm; d1 ≈:57.55 mm; |
| 241/600CA Spherical Roller Bearing | r3,4 min.:3.3 mm; D1 ≈:511 mm; Calculation factor e:0.54; Comparative axial load rating CFa:257 kN; Calculation factor Y1:1.25; Comparative radial load rating CF:965 kN; d1 ≈:465 mm; r1,2 min.:1.5 mm; Calculation factor Y2:1.85; d:431.8 mm; |
| GE 5 E Spherical Plain Bearing | Calculation factor Y0:2; Comparative radial load rating CF:8650 kN; d:939.8 mm; r3,4 min.:12.7 mm; Basic dynamic load rating C:31900 kN; Fatigue load limit Pu:5300 kN; Calculation factor Y2:3; Calculation factor e:0.33; Calculation factor Y1:2; D1 ≈:1180 mm; |
| 23944CA/W33 Spherical Roller Bearing | Oil Speed Rating n2:3600 rpm; d:110.000 mm; B:38.00 mm; Grease Speed Rating n1:2600 rpm; Basic Static Radial Load Rating Co:156000 N; D:200.0000 mm; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius ra:2.00 mm; |
| 22324CA/W33 22324CAK/W33+H2324 Spherical Roller Bearing | Basic Static Radial Load Rating Co:65500 N; Fillet Radius ra:1.50 mm; D:125.0000 mm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:69300 N; Oil Speed Rating Open/Shielded n2:5000 rpm; B:24.00 mm; Grease Speed Rating Open/Shielded n1:4100 rpm; d:70.000 mm; |
| 23960CC/W33 23960CA/W33 23960CCK/W33 23960CAK/W33 Power Transmitting Equipment Bearing | D_SEL:1/4-28; ANGLE:135 º; D11:1.11 in; Outside Diameter D2:1.8504 in; ZZ:0.06 in; Weight W:0.31 lb; Outher Width C:0.5512 in; Bore Diameter D:3/4 in; Basic Dynamic Radial Load Rating:2860 lbf; Inner Width B:1.220 in; |
| 24172CAK30F1/W33 24172CAK30/W33 4453772K SX-24172 Spherical Roller Bearing | P150°:120 kN; H:422.275 mm; R2:46.038 mm; End plug (suffix Y):EPR 22; Eye bolt:2 x 1/2-13 UNC; Labyrinth ring (db shaft position):LOR 175; H1:209.55 mm; da:200 mm; Pa:77 kN; Cap bolt, SAE grade:5; |
| 22244, 22244CA/W33, 22244CCK/W33, 22244CAK/W33 Spherical Roller Bearing | Reference speed:1500 r/min; Da max.:293.5 mm; D:310 mm; Dimension series:4GD; Limiting speed:2000 r/min; db min.:189.5 mm; rb max.:4 mm; da max.:196 mm; d1 ≈:238.51 mm; Da min.:259 mm; |
| 239/900CAF1/W33 239/900 Spherical Roller Bearing 900mm X 1180mm X206 Mm | Labyrinth ring:2 x LOR 186; H2:41.275 mm; S:4.763 mm; Mass pillow block:30.8 kg; Housing:SAFS 518; R1:60.325 mm; P60°:141 kN; RG:3/8 NPT; P120°:53.4 kN; P180°:58.7 kN; |
| Spherical Roller Bearing 22218CCK/W33 | D:215 mm; rs Dynamic (Cr):3 mm; Static (Cor):147.290 kN; B:47 mm; Oil:2 800 min-1; d:100 mm; Pu:58.400 kN; B1:52 mm; with tapered bore:1320 ; Grease:2.080 kN; |
| 21312 21312E 21312EK Spherical Roller Bearing | α:105 °; Tolerance housing:H7; d:18 mm; B:12 mm; Coefficient of friction µ min.:0.08; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v max.:0.5 m/s; Tolerance shaft:e7; a:3 mm; D:25 mm; |
| GE90ES Radial Spherical Plain Bearing 90x130x60mm | Lock washer:W 36; d:180 mm; d1:160.338 mm; Threads per inch:8; Sleeve:S 36x6.5/16; B:28.042 mm; d3 max.:230.327 mm; Lock nut:AN 36; Hydraulic nut:HMVC 36E; Mass adapter sleeve assembly:9.3 kg; |
23234CC/W33 23234CA/W33 23234CCK/W33 23234CAK/W33 Cone Crusher Bearing Video
Marine Plywood - Boulter Plywood
Okoume A/B BS1088 Lloyds Approved Quantity Discounts. Water & boil proof glue (WBP), Whole piece rotary cut face, Minimum 1.2mm face veneer thickness
BS 1088 - Wikipedia
In materials, BS 1088 is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue
BS 1088 (Hydrotek) – Midwest Boat Appeal & Marine Plywood
BS 1088 Hydrotek is a multi-ply marine plywood that is superior to all standard Meranti plywood currently produced. Both face and inner plies are constructed from whole piece, color matched, Meranti veneers. Hydrotek is used in boat building applications where only the best will do
Hydrotek, Meranti, Bs 1088 Rules 5 Ply 6mm x 4' x 8
Hydrotek Marine Plywood is manufactured utilizing BS 1088 specifications, it is a multiply type construction, with balanced internal plys and thick (1mm before
meranti bs1088 hydrotek 6mm 5 ply marine grade plywood 4
Our BS 1088 is Lloyds certified, the BS 6566 version allows slightly thinner veneers and some filled end splits in the faces, but the same void free core and WBP
Okoume Marine Plywood: BS 1088 Quality - 3mm, 4mm, 6mm
4mm, 5/32", 13 lbs, 3, BS1088. 6mm, 1/4", 21 lbs, 5, BS1088. 9mm, 3/8", 31 lbs, 5, BS1088. 12mm, 1/2", 42 lbs, 7, BS1088. 18mm, 3/4", 62 lbs, 11, BS1088
Okoume Plywood - BS 1088 Joubert Marine Grade | Marine
Buy Okoume plywood online. High quality Okoume marine grade plywood by Joubert. Meets BS 1088 and Lloyd's Register Type Approved. Shipped nationwide