| 1206K Self-aligning Ball Bearing | S:17.5 mm; A1:15 mm; A:34 mm; Recommended tightening torque for set screw:11.5 Nm; d:35 mm; L:117 mm; J:92 mm; N:14mm; Designation of bearing:UC207G2L4; C0:15.2 kN; |
| 1226 Self-aligning Ball Bearing 130x230x46 | N:12mm; A1:13 mm; C0:7.88 kN; G:M6x1; T min.:-40 °C; Designation of housing:F205N-; L:95 mm; Z:39.2 mm; T max.:100 °C; Weight:0.84 kg; |
| 2303-2RS,2303-2RS-TVH Sealed Self-aligning Ball Bearing | N1:24.00 mm; Jmax:215 mm; End Cover1:EC511-609; Cage Type:EJ; Max Grease Speed:5100; L:255 mm; Material :Cast Iron; G:M16; Housing:SNT 511-609; Shaft Diameter db:55 mm; |
| 23120CA Self-Aligning Roller Bearings 100X165X52MM | C0r:22.8 kN; Brand:NTN; Max operating temperature, Tmax:120 °C; F:22 mm; Dw:2 mm; D:40 mm; Characteristic rolling element frequency, BSF:11.92 Hz; Product Group:B04120; Nlim (grease):7,000 rpm; Radial clearance class:CN; |
| 1215 Bearing 75*130*25mm | L:219.5 mm; Weight:4.18 kg; C:43.55 kN; B1:71.3 mm; Designation of housing:PLE211-; N1:26 mm; J:170.5 mm; C0:29.2 kN; s1:48.4 mm; S:27.7 mm; |
| 23024C Beaing | B:21.4 mm; H1:2.8 mm; Recommended tightening torque for set screw:3.7 Nm; B1:30.9 mm; S:7.5 mm; A:31.7 mm; Weight:0.28 kg; J:86 mm; d:25.4 mm; H:28.6 mm; |
| 23172CA Spherical Roller Bearing 360X600X192MM | D:150 mm; K - Factor2:1.32; Cg - Geometry Factor:0.141; C - Cup Width:27 mm; Db - Cup Backface Backing Diameter:134.87 mm; Design Units:METRIC; G2 - Heat Generation Factor (Rib-Roller End):36.1; Da - Cup Frontface Backing Diameter:143.26 mm; r - Cup Backface To Clear Radius1:2.54 mm; Y - ISO Factor4:1.36; |
| 22320/W33 Self Aligning Roller Bearing 100x215x73mm | Days to Ship:8 Days; Bearing Retained:No; Thickness T(mm):22 ～ 39; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Seals:VV (Non-Contact Rubb; Bearing Part Number:6200; |
| 1221 Self-aligning Ball Bearings | Retainer Type:Punching; Number of Raceway Ring Rows:Single Row; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Max. Allowed rpm(rpm):40000; Days to Ship:9 Days or more; Rolling Element Material:Steel; Basic Dynamic Load Rating(N):2240; Seal, Shield Symbols:LB; Type:Ball; |
| 2311 Bearing Self-aligning Ball Bearings | Type:Bearings with Housin; RoHS:6; Bearing Used:Deep Groove Ball Bea; Lateral Width L(mm):64; Number of Bearings:Single; Housing Material:1045 Carbon Steel; Bearing Part Number:6201; Shape:T-Shaped; Seals:DD (Contact Rubber S; |
| 1207K+H207 Self-aligning Ball Bearings | A:9.5000 in; Triple Seal 2 Req’d:LOR 168; Bolt Hole Width:1.5 in; Assembly Weight:615.000 lb; Full Timken Part Number:SAF225448; Bearing Number:22244K; B:32.7500 in; Adapter Assembly Number1:SNW-44 x 8.000; E Min.:24.7500 in; E Max.:27.8750 in; |
| 1203 Self Aligning Ball Bearing | Characteristic rolling element frequency, BSF:3.81 Hz; Minimum Buy Quantity:N/A; da min:26.5 mm; Product Group:B04144; Static load, C0:26.9 kN; Category:Bearings; Fatigue limit load, Cu:3.3 kN; r1s min:0.6 mm; Nlim (grease):13,000 rpm; E:45.5 mm; |
| FA 1211K Self-aligning Ball Bearings | Dz:120 mm; S:25.4 mm; s1:32.55 mm; L:175 mm; B:65.1 mm; A1:20 mm; T min.:-20 °C; T max.:100 °C; d:60 mm; Designation of open end cover:SCO212-60; |
| 23028CK Self Aligning Roller Bearing | A:29.5 mm; e:19 mm; Recommended tightening torque for set screw:5.5 Nm; d1:27.2 mm; L:86 mm; J:63.5 mm; C:9.55 kN; T max.:100 °C; Designation of housing:FE203N-; Designation of open end cover:SCOE201-12; |
| 6008-2RS Deep Groove Ball Bearing 40X68X15mm | da max:25 mm; Brand:NTN; da min:22 mm; d:17 mm; Characteristic rolling element frequency, BSF:3.39 Hz; Fatigue limit load, Cu:0.3 kN; Da max:42 mm; Characteristic outer ring frequency, BPF0:2.54 Hz; f0:12.2; Characteristic inner ring frequency, BPFI:4.46 Hz; |
| 230/500CAC/W33, 230/500CA, 230/500C3W33 Roller Bearing, 500X720X167mm, 230/500CACK/W33 | Basic Load Rating, Dynamic Rating(N):5100; Basic Load Rating, Static Rating(N):2400; Unit Body Material:Cast Iron; Diameter series symbol:For small light load; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Diamond Flange Shape; Bearing Inner Dia. Shape:Cylindrical Bore Set; |