| 1315 Self Aligning Ball Bearings 75x160x37 | Fit:J7; Surface Treatment:No; Unit, Type:Insert Bearing Unit; d:30; Grease Type:Standard Grease; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Bearing Inner Dia. Shape:Cylindrical Bore Set; Accessory:With cast iron cover; Bearing Unit, Type:Take-Up Type; |
| 22326CC Self-Aligning Roller Bearings 130X280X93MM | Recommended tightening torque for set screw:3.7 Nm; N1:48,5; S:7.5 mm; A:19 mm; N:8,7mm; d1:37.4 mm; L:203.2 mm; A1:23.4 mm; T max.:100 °C; Weight:0.58 kg; |
| Self-aligning Roller Bearing 22260CACK/W33+H3160 | Designation of housing:F207-; d1:51.1 mm; J:92 mm; L:117 mm; T max.:100 °C; e:19 mm; s1:30.2 mm; B:25.4 mm; S:9.5 mm; B1:38.9 mm; |
| H2320 Adapter Sleeve 90X100X130mm | Set Screw Size:M6x1; Seal Type:Shroud Seal; Static Load Rating:1750 lbf; Outside Ring Width C:15.000 mm; O.D. Type:Spherical OD; Weight:0.50 lb; Dimension S1:26.9 mm; Number of Set Screws:2; Dimension B2:0.531 in; Series:Industrial; |
| 1222K 111222 1222 Self Aligning Ball Bearing | DD:198.4 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:642000 N; Aa - Cage-Cone Backface Clearance:13.5 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:235000 N; K - Factor8:0.71; B - Cone Width:62 mm; Series:31324X; Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:4 mm; C0 - Static Radial Rating:777000 N; |
| 22226C3W33 Bearing | Unit, Type:Bearing unit; B:415; Bearing Unit, Type:Take-Up Type; Surface Treatment:No; Rolling Element Material:Steel; Cover Type:Cast iron single clo; Unit Body Material:Cast Iron; Lubrication method:Oil Supply Type; Bearing Inner Dia. Shape:Tapered hole adapter; |
| 1205 Self Aligning Ball Bearing | SW:3.18 mm; Designation of bearing:UC205-14G2L4; L3:38 mm; Weight:0.71 kg; A2:35 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; T min.:-20 °C; G1:M20; Designation of housing:EHE205-; |
| 1211 Bearing 55x100x21mm | Oil Lubrication - T Seal:3800 rpm; Dimension J (Bolt Size):0.625 in; Full Timken Part Number:QAAP11A055SB; Oil Lubrication - B/C/O Seal:1600 rpm; Locking Style:Double Concentric; Y1 - Geometry Factor:2.95; Float:0.050 in; Dimension RAA:0.69 in; Engineering Group:Mounted Bearing; Pre Install Clearance Max:0.0026 in; |
| 1305 Bearing 25*62*17mm | B1:48.4 mm; C:43.55 kN; d:55.56 mm; C0:29.2 kN; Weight:0.81 kg; s1:36.95 mm; Recommended tightening torque for set screw:16.8 Nm; Designation of bearing:ES211-35G2T04; A2:36.4 mm; T max.:100 °C; |
| 2304k Bearing | Days to Ship:8 Days; Number of Bearings:Double; Bearing I.D. d(mm):10; Type:Bearings with Housin; Thickness, Height Indication:T, h Selection; Height H(mm):20 ～ 40; RoHS:6; C Chamfered:Not Provided; Lateral Width L(mm):58; |
| 2309 Full Ceramic Self-aligning Ball Bearings | d:55 mm; N:35mm; A2:38 mm; S:22.2 mm; Designation of housing:T211N-; G:M6x1; T max.:100 °C; H:146 mm; N1:25 mm; B:55.6 mm; |
| H3148 Adapter Sleeve 220X240X280mm | Holder Surface Treatment:Black Oxide Coating; Height H(mm):40 ～ 80; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Width T(mm):16; Bearing Part Number:6906; Seals:VV (Non-Contact Rubb; Bearing I.D. d(mm):30; |
| 50 mm x 110 mm x 27 mm XDZC 21317 Self-aligning Roller Bearing 85x180x41mm | a:18 mm; da max:54 mm; r1s min:1.5 mm; Category:Bearings; Da min:74 mm; Dynamic load, C:67.5 kN; Minimum Buy Quantity:N/A; Nlim (oil):5,900 rpm; Product Group:B04334; Weight / Kilogram:0.488; Size (mm):50 mm x 110 mm x 27 mm ; |
| 1303 Bearing 17*47*14mm | N1:23 mm; Z:69 mm; T max.:200 °C; Dz:88 mm; C0:18.2 kN; d:38.1 mm; s1:24.6 mm; A1:34 mm; H:49.2 mm; Weight:2.23 kg; |
| H2304 Adapter Sleeve 17X20X32mm | Bearing Used:Deep Groove Ball Bea; Width T(mm):50; Volume Discount:Available; Bearing Retained:Yes (with retaining; RoHS:6; Shape:Flange Type; Seals:VV (Non-Contact Rubb; Flange Shape:Round Type; Bearing I.D. d(mm):15; |
| 1308 Bearing 40*90*23mm | B:53.7 mm; H1:15 mm; N:M16; Designation of bearing:US212-36G2T04; Designation of open end cover:SCOU212-36; H:69.9 mm; Recommended tightening torque for set screw:16.8 Nm; Z:90 mm; E:25 mm; s1:26.85 mm; |