No. | Brand | G | c | B | S | N | e | d | P |
Se5 | - | - | - | - | - | - | - | - | - |
K2 | - | - | - | - | - | - | - | 30 | - |
1000kg/bag | - | - | - | - | - | - | - | 10 | - |
mac063c-0-hs-2-c/095-b-1 | Rexroth | - | - | 30.2 mm | - | 13,5mm | - | 38.1 mm | - |
CBWL-E3/E3 | - | - | - | - | - | - | - | 20 | - |
E1, | - | - | - | - | - | - | - | - | - |
5v | - | - | - | - | - | - | - | - | - |
A4VG71 | Rexroth | - | - | - | - | - | - | - | - |
F684zz | - | - | - | - | - | - | - | - | - |
PVD-2B-44P | Nachi | - | - | - | - | - | - | 25 | - |
4 | Rexroth | - | - | - | - | - | - | - | - |
55175C | Timken | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
440, | John Deere | - | - | - | - | - | - | - | - |
S52 | - | - | - | - | - | - | - | - | - |
MP08-20 | INA | - | - | - | - | - | - | - | - |
40W | - | - | - | - | 17 mm | - | - | - | - |
7020ADB | NSK | - | - | - | - | M14 | - | - | - |
NU317E | - | - | - | - | - | - | - | - | - |
PC28UG | INA | - | - | - | - | - | - | 15 mm | - |
Z2FSK | Rexroth | - | - | - | - | - | - | 2.3617 in | - |
480 | - | - | - | - | - | - | - | - | - |
4500kg | - | - | - | - | - | - | - | - | - |
6310 | SKF | - | - | - | - | - | - | - | - |
YB-E200/80 | - | - | - | - | - | - | - | - | - |
24028 | NSK | - | - | 32.7500 in | - | - | - | - | - |
24v | - | M6x1 | - | - | - | - | - | 12.7 mm | - |
P-LB6835R | Link-Belt | - | - | - | - | - | - | - | - |
99.5%Borax | - | R1/8" | - | 30.2 mm | - | 14mm | - | - | - |
M8X12 | - | - | - | - | - | - | - | - | - |
Self-Aligning Ball Bearing 108,108TN9 | Characteristic inner ring frequency, BPFI:4.92 Hz; Dynamic load, C:12.8 kN; Mass:0.11 kg; da min:25 mm; ra max:1 mm; D:47 mm; Characteristic outer ring frequency, BPF0:3.08 Hz; Nlim (grease):16,000 rpm; Min operating temperature, Tmin:-25 °C; Characteristic rolling element frequency, BSF:4.12 Hz; |
2218 Bearing 90x160x40mm | Oil Lubrication - B/C/O Seal:1300 rpm; Eng Internal Radial Clearance - Min:0.0020; Pre Install Clearance Min:0.050 mm; Locking Style:Single Concentric; Pre Install Clearance Max:0.080 mm; Dimension N:2.930 in; Eng Internal Radial Clearance - Max:0.0031; Bearing Number:22215; Grease Lubrication - M/N Seal:1600 rpm; C - Dynamic Load (Basic):49900 lb; |
0 Inch | 0 Millimeter x 3.063 Inch | 77.8 Millimeter x 0.656 Inch | 16.662 Millimeter H3028 Adapter Sleeve 125X140X165mm | Thread Nominal M(mm):M115X2.0; Material:[Stainless Steel] 30; Screw Type:Metric (fine) Thread; Surface Treatment:No Surface Treatment; Days to Ship:16 Days; Nominal Number:HLB-23; Sales Unit:Low Quantity (can be; Shape:Round shape; Type:Lock Nut; Size (mm):0 Inch | 0 Millimeter x 3.063 Inch | 77.8 Millimeter x 0.656 Inch | 16.662 Millimeter ; |
1205KTN 1205TN Bearing | Rolling Element Material:Stainless Steel; Precision:Grade 0; d:5; Basic Load Rating, Static Rating(N):675; Basic Dynamic Load Rating(N):1729; Load Direction:Radial; RoHS:6; Size Standards:Metric System; Sealing Structure:Double Shielded; Number of Raceway Ring Rows:Single Row; |
23060CA Spherical Roller Bearing 300X460X118MM | Unit Body Material:Shaped steel/Groove-; Bearing Unit, Type:Take-Up Type; Rolling Element Material:Bearing Steel; Basic Load Rating, Static Rating(N):17800; Machining:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Accessory:No Cover; RoHS:6; d:40; |
1300 Bearing | Designation of housing:F206-; T max.:100 °C; d1:45 mm; J:83 mm; C:19.5 kN; N:12mm; B1:38 mm; B:25 mm; Adapter sleeve reference:H2306-16; T min.:-20 °C; |
2320TN1 1620A Self Aligning Ball Bearing | e - ISO Factor8:0.37; Design Units:Imperial; Aa - Cage-Cone Backface Clearance:5.6 mm; B - Cone Width:63.5 mm; R - Cone Backface To Clear Radius1:4.830 mm; G2 - Heat Generation Factor (Rib-Roller End):59.4; G1 - Heat Generation Factor (Roller-Raceway):453.9; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:23200 lbf; Ab - Cage-Cone Frontface Clearance:4.8 mm; Cg - Geometry Factor:0.132; |
21311 CC Self Aligning Ball Bearings 55x120x29 | Bearing Type:Split Cylindrical Ex; Seal Type1:Viton Single Lip; Note:This product line wa; Dimension C:3.87 in; Bearing Number:LSE504BX; Dimension Y:3.0 in; Bearing UPC:013992059239; Cr - Dynamic Load Rating:94869 lbf; Series Type:Light Series; Dimension L:6.22 in; |
11212 TV Self-aligning Ball Bearings | Precision:Class 0; Basic Load Rating, Dynamic Rating (Ca)(N):28000; Type:Thrust Bearing; Width B (or T)(mm):15; Load Direction:Thrust Load, Axial; Volume Discount:Available; D:47; Specifications, Environment:Standard; RoHS:6; |
2316 K Self-aligning Ball Bearing 80x170x58mm | Series:66000; Bearing Weight:7.56 lb; Y2 - ISO Factor10:1.6; d:2.1250 in; Y1 - ISO Factor9:1.08; G1 - Heat Generation Factor (Roller-Raceway)11:50.2; B - Cone Width:1.2500 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:17900 lbf; K - Factor7:0.93; e - ISO Factor8:0.63; |
1214AKTN Self Aligning Ball Bearing | Dimension C:2.88 in; Eng Internal Radial Clearance - Min:0.0016; Dimension SAA:3.75 in; Eng Internal Radial Clearance - Max:0.0026; Grease Lubrication - B/C/O Seal:1800 rpm; Shaft Size Type:Imperial; Pre Install Clearance Min:0.0016 in; Dimension J (Bolt Size):0.625 in; e - Geometry Factor:0.24; Dimension D Min:5.93 in; |
1212 Self-Aligning Ball Bearings 60X110X22MM | Category:Roller Bearings; Radial clearance class:CN; r1s min:0.6 mm; Brand:NTN; Nlim (oil):18,000 rpm; Db min:42 mm; rs min:1 mm; Minimum Buy Quantity:N/A; B:14 mm; F:26.5 mm; |
22310CC Self-Aligning Roller Bearings 50X110X40MM | Seals:Provided; Material:[Stainless Steel] 44; B:14; RoHS:6; Cam Follower Type:Standard; Shaft:Provided; Roller Type:Flat Type; Category:Cam Followers; Roller Guiding Method:Retainer Type; Application:Low Particle (Dust); |
22322CC Self-Aligning Roller Bearings 110X240X80MM | Format symbol:NU (double brims for; Specifications:Standard; Raceway Ring Shape:Cylindrical Roller; Holder Symbol:No; Large-capacity type:Standard; Revolution Frequency(rpm):4100; d:110; Inner/Outer Ring Material:Steel; Specifications/Environment:Standard; Rolling Element Material:Steel; |
22222MB Self-Aligning Roller Bearings 110X200X53MM | C0:11.2 kN; A1:25 mm; C:19.5 kN; Recommended tightening torque for set screw:3.7 Nm; Weight:1.12 kg; H2:82 mm; T max.:100 °C; Designation of open end cover:SCOU206-18; s1:15 mm; B:30 mm; |
1228 Self-aligning Ball Bearing 140x250x50 | Grease Type:Standard Grease; Accessory:No Cover; Seal:Nitrile; d:30; Surface Treatment:No; Basic Load Rating, Static Rating(N):11300; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Machining:Steel plate cover mo; |
35BD5020DU Air Conditioner Compressor Bearing 35x50x20mm Video
Okoume Marine Plywood: BS 1088 Quality - 3mm, 4mm, 6mm
4mm, 5/32", 13 lbs, 3, BS1088. 6mm, 1/4", 21 lbs, 5, BS1088. 9mm, 3/8", 31 lbs, 5, BS1088. 12mm, 1/2", 42 lbs, 7, BS1088. 18mm, 3/4", 62 lbs, 11, BS1088
Okoume Plywood - BS 1088 Joubert Marine Grade | Marine
Buy Okoume plywood online. High quality Okoume marine grade plywood by Joubert. Meets BS 1088 and Lloyd's Register Type Approved. Shipped nationwide
meranti bs1088 hydrotek 6mm 5 ply marine grade plywood 4
Our BS 1088 is Lloyds certified, the BS 6566 version allows slightly thinner veneers and some filled end splits in the faces, but the same void free core and WBP
BS 1088 - Wikipedia
In materials, BS 1088 is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue
Marine Plywood - Boulter Plywood
Okoume A/B BS1088 Lloyds Approved Quantity Discounts. Water & boil proof glue (WBP), Whole piece rotary cut face, Minimum 1.2mm face veneer thickness
BS 1088 (Hydrotek) – Midwest Boat Appeal & Marine Plywood
BS 1088 Hydrotek is a multi-ply marine plywood that is superior to all standard Meranti plywood currently produced. Both face and inner plies are constructed from whole piece, color matched, Meranti veneers. Hydrotek is used in boat building applications where only the best will do
Hydrotek, Meranti, Bs 1088 Rules 5 Ply 6mm x 4' x 8
Hydrotek Marine Plywood is manufactured utilizing BS 1088 specifications, it is a multiply type construction, with balanced internal plys and thick (1mm before