| 1216 1216K Bearing | Y - ISO Factor1:0.81; Design Units:Imperial; Y1 - ISO Factor5:0.92; Da - Cup Frontface Backing Diameter:8.70 in; r - Cup Frontface To Clear Radius2:0.090 in; K - Factor3:0.79; e - ISO Factor4:0.74; Cg - Geometry Factor7:0.142; D:9.0000 in; Y2 - ISO Factor6:1.36; |
| 1230 Self-aligning Ball Bearing 150x270x54 | Seal Type:Viton Single Lip; Bearing Number:MSM160BX; Cor - Static Load Rating:264151 lbf; Bearing Type:Split Cylindrical Ex; Dimension H2:21.1 in; Dimension M:9.5 in; Dimension K:6.8 in; Dimension H:10.512 in; Dimension L:23.5 in; Dimension J:17.6 in; |
| 1205/P5 1205/P6 Bearing | Outer Ring:With Outer Ring; Size Standards:Metric System; Special Configurations Code:No; Rolling Element Material:Steel; Clearance sign:No; Rotational Speed(rpm):4800; Basic Load Rating, Dynamic Rating(N):77000; O.D.(Ø):80; Spacer, Sleeve symbol:No; Specifications:Standard; |
| Thrust Self-aligning Roller Bearing 29338E | Designation of bearing:UC215-48G2T20; N:19mm; Designation of housing:FC215-; Weight:7.03 kg; A4:39 mm; S:33.3 mm; d:76.2 mm; L:220 mm; T max.:200 °C; s1:38.9 mm; |
| 21305 CC Self Aligning Ball Bearings 25x62x17 | Outer Ring Type:Flat; Lubricant:No; Outer Ring:With Outer Ring; Rolling Element Material:Steel; Size Standards:Metric System; Load Direction:Radial; Format symbol:HK; Specifications/Environment:Standard; Post-assembly heat treatment (pre-bent type):No; |
| 2312K 111612 2312 1612 Self Aligning Ball Bearing | Tensioning Unit Type:Tension Type; Bearing Number:MSM105BR; Seal Type:Felt Seal; Shaft Size:105 mm; Note:This product line wa; Bearing UPC:013992033383; Dimension W:1.7 in; Dimension R:1.6 in; Bearing Type:Split Cylindrical Re; Dimension P:0.9 in; |
| OH 3284, OH 3284 H Adapter Sleeve(matched Bearing:23284 CAK/W33) | Width T(mm):50; Number of Bearings:Double; Bearing Part Number:6804; Bearing I.D. d(mm):20; RoHS:6; Flange O.D. H(φ):60; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Volume Discount:Available; Housing Material:304 Stainless Steel; |
| 1213 ETN9 Bearing 65x120x23mm | R - Cone Backface To Clear Radius1:0.760 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3710 lbf; C - Cup Width:20.638 mm; Design Units:Imperial; B - Cone Width:24.765 mm; Cg - Geometry Factor:0.0517; da - Cone Frontface Backing Diameter:29.97 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1470 lbf; a - Effective Center Location3:-9.4 mm; Bearing Weight:0.30 Kg; |
| 22214CC Self-Aligning Roller Bearings 70X125X31MM | Support Type:Two-Bolt Plummer Blo; Dimension L :13-5/8 in; Dimension H2:8.95 in; Dimension M :3-7/8 in; Note:This product line wa; Bearing Number:LSE304BX; Bearing Type:Split Cylindrical Ex; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension J2 :10-3/8 in; Housing Width:5.3 in; |
| H320 Adapter Sleeves(1320K, 1520K, 22220K, 22220CK) | T min.:-40 °C; d:19.05 mm; Designation of housing:FL204-; e:15 mm; Recommended tightening torque for set screw:3.7 Nm; G:M6x1; B1:30.9 mm; A:25.5 mm; Weight:0.45 kg; C:12.8 kN; |
| Self-Aligning Ball Bearing 2219, 2219K, 2219M, 2219KM, 95X170X43mm | Unit Body Material:Cast Iron; Fit:J7; Unit, Type:Insert Bearing Unit; Bearing Unit, Type:Square flange shape; Basic Load Rating, Static Rating(N):23300; d:40; Surface Treatment:No; Rolling Element Material:Bearing Steel; |
| OH 3088, OH 3088 H Adapter Sleeve(matched Bearing:23088 CAK/W33) | Designation of bearing:UC207-22G2; T max.:100 °C; H:47.6 mm; H1:20 mm; A:48 mm; S:17.5 mm; E:22 mm; C:25.7 kN; L:100 mm; Recommended tightening torque for set screw:8 Nm; |
| 1314 Self Aligning Ball Bearings 70x150x35 | A1:32 mm; C0:20.8 kN; T min.:-20 °C; Designation of open end cover:SCOU209-26; B:49.2 mm; S:19 mm; C:31.85 kN; H:53.9 mm; T max.:200 °C; L1:29 mm; |
| 22211K, 55X100X25mm, 22211CC/W33, 22211CCK/W33+H308, 22211TN1/W33 Self-aligning Roller Bearing | Bearing Part Number:626; Holder Surface Treatment:Clear Anodize; Number of Bearings:Single; Shape:L-Shaped; Seals:ZZ (Double Shield); Housing Material:[Aluminum Alloy] Alu; Type:Bearings with Housin; Width T(mm):24; |
| OH 31/710 H Adapter Sleeve | S:11 mm; H:55.6 mm; T min.:-20 °C; C:35.1 kN; T max.:100 °C; Weight:2.5 kg; d1:67.2 mm; N1:27 mm; B1:43.7 mm; d:50 mm; |
| 1213 Bearing 65x120x23mm | Bearing Style:Rubber Sealed; Preload Mark:CM; d:70; Outer Ring Shape:Flat; Types:16**/6*** series; Seal, Shield Symbols:LLU; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; D:150; Max. Allowed rpm(rpm):3100; |