| 22320CAK, 22320CC/W33, 22320CCK/W33, 100X215X73mm, 22320KTN1/W33 Self-aligning Roller Bearing | Preload Mark:L; Preload:Light Preload; Size Standards:Metric System; Type symbol:No; Bearing Style:Open Type; Load Direction:Radial; Outer Ring:With Outer Ring; Symbol of contact angle:A; Days to Ship:Quote; Inner/Outer Ring Material:[Steel] Steel; |
| H208 Adapter Sleeve | Seals:DD (Contact Rubber S; Number of Bearings:Single; Holder Surface Treatment:Black Oxide Coating; RoHS:6; Days to Ship:8 Days; Shape:Front Mount; Housing Material:1045 Carbon Steel; Bearing Part Number:6002; Bearing Retained:Yes (with retaining; |
| 1201k Bearing | Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:4.32 Hz; r1s min:3 mm; Nlim (oil):3,500 rpm; Min operating temperature, Tmin:-40 °C; d1:122 mm; rs min:3 mm; Inventory:0.0; d:80 mm; Fatigue limit load, Cu:34.7 kN; |
| 1203 Self-aligning Ball Bearing | G:M6x1; L:86 mm; Designation of housing:F204-; C0:6.65 kN; A:25.5 mm; Weight:0.6 kg; J:64 mm; s1:15.5 mm; A2:33.3 mm; T max.:100 °C; |
| 23036K Self Aligning Roller Bearing | Nref:10,000 rpm; D:72 mm; Characteristic inner ring frequency, BPFI:5.44 Hz; Nlim:16,000 rpm; Brand:SNR; Characteristic outer ring frequency, BPF0:3.56 Hz; Db min:80 mm; Max operating temperature, Tmax:120 °C; D3 max:68.81 mm; Mass:0.28 kg; |
| 2318 Bearing | Characteristic inner ring frequency, BPFI:8.4 Hz; C:25 mm; Characteristic outer ring frequency, BPF0:5.6 Hz; B:31 mm; Nlim:9,300 rpm; Da max:71.5 mm; Y0:1.05; a:20.5 mm; D:80 mm; Fatigue limit load, Cu:14.5 kN; |
| Self-aligning Roller Bearing 22260CACK/W33+H3160 | Designation of housing:F207-; d1:51.1 mm; J:92 mm; L:117 mm; T max.:100 °C; e:19 mm; s1:30.2 mm; B:25.4 mm; S:9.5 mm; B1:38.9 mm; |
| 21307CA Self-Aligning Roller Bearings 35X80X21MM | Unit, Type:Insert Bearing Unit; Machining:No; Fit:J7; Rolling Element Material:Bearing Steel; RoHS:6; Basic Load Rating, Static Rating(N):6650; Bearing Unit, Type:Cartridge type unit; Seal:Silicone; Bearing Inner Dia. Shape:Cylindrical Bore Set; |
| 22244 Self-aligning Roller Bearing | RoHS:6; Roller Type:Flat Type; B:14; Category:Cam Followers; Roller Lining:With Urethane; Allowable Rotational Speed(rpm):130; Thread Size on Cam Follower (M)(mm):M12; Material:[Carbon Steel] 52100; Unit:Metric Series; |
| 1320 Self-aligning Ball Bearing 100x215x47 | B - Cone Width:0.8125 in; a - Effective Center Location4:-0.23 in; Design Units:Imperial; Cone Part Number:15103; C1 - Dynamic Radial Rating (1 million revolutions)6:13500 lbf; G1 - Heat Generation Factor (Roller-Raceway):14.6; Cg - Geometry Factor:0.0606; Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:0.03 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:6080 lbf; |
| 230/560, 230/560CAK/W33, 230/560/W33 Roller Bearing, 560X820X195mm, 230/560CA | Pillow/Plummer Block Style:Split Cylindrical Ho; Bolt Size:8 x M56; Maximum Speed:280 rpm; Cor - Static Load Rating:2115902 lbf; Bearing Number:HSM560BX; Support Type:Eight-Bolt Plummer B; Dimension H2:52.8 in; Dimension L:63.0 in; Dimension M:16.0 in; Cr - Dynamic Load Rating:1077959 lbf; |
| 1218 Self-aligning Ball Bearings | Seal:Nitrile; Unit Body Material:Cast Iron; Diameter series symbol:For Heavy Load; Heat Resistant Characteristics:Standard; Bearing Unit, Type:Square flange shape; Fit:J7; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):133000; |
| 22230CA Self-Aligning Roller Bearings 140X270X73MM | Y2 - ISO Factor6:3.02; D:13.6875 in; Da - Cup Frontface Backing Diameter:13.15 in; K - Factor3:1.76; Y - ISO Factor1:1.8; Series:LM249700; e - ISO Factor4:0.33; G1 - Heat Generation Factor (Roller-Raceway)7:1000; Cg - Geometry Factor8:0.129; Y1 - ISO Factor5:2.03; |
| NSK1213K 65 X 120 X 23mm Bearing | Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Flange Shape:Compact Type; Volume Discount:Available; RoHS:6; Type:Bearings with Housin; Seals:DD (Contact Rubber S; Flange O.D. H(φ):54; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; |
| 23130B Self Aligning Roller Bearing 150x250x80mm | Rolling Element Material:Stainless Steel; Bearing Unit, Type:Diamond Flange Shape; Unit, Type:Insert Bearing Unit; Seal Type:Standard; Surface Treatment:No; Type of Insert Bearing:Cylindrical Bore Sha; With / Without Cover:No; Days to Ship:10 Days; Basic Load Rating Cr(KN):19.6; Specifications:Oil Supply Type; |
| 2217 Bearing 85x150x36mm | RoHS:6; Bearing I.D. d(mm):20; Type:Bearings with Housin; Number of Bearings:Double; Lateral Width L(mm):88; Bearing Used:Deep Groove Ball Bea; Bearing Material:Steel; Days to Ship:8 Days; Bearing Retained:No; |