| 127 TN9 Bearing 7x22x7mm | Bearing UPC:013992057389; Dimension M:16.0 in; Dimension H2:52.8 in; Seal Type:Kevlar Packing Seal; Dimension H:24.488 in; Dimension H1:4.0 in; Housing Width:19.5 in; Bearing Type:Split Cylindrical Re; Dimension K:9.5 in; Cr - Dynamic Load Rating:1047610 lbf; |
| 2304 Self-Aligning Ball Bearings | d:34.92 mm; SW:3.97 mm; C0:15.2 kN; L:122 mm; C:25.7 kN; L1:76 mm; A:32 mm; T min.:-20 °C; B:25.4 mm; s1:30.2 mm; |
| FA 1211K.C3 Self-aligning Ball Bearings | C Chamfered:Not Provided; Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Days to Ship:8 Days; Height H(mm):20 ～ 30; Bearing Part Number:625; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Shape:T-Shaped; |
| 249/1500CAFB/W33 Self Aligning Roller Bearing | Designation of housing:FD208-; s1:33.4 mm; J:119 mm; H:148 mm; Recommended tightening torque for set screw:8 Nm; G:R1/8"; A:24 mm; B:30.2 mm; N:14mm; d1:58 mm; |
| 2311 M Bearing 55x120x43mm | ra max:0.3 mm; Max operating temperature, Tmax:110 °C; da min:14 mm; d:12 mm; Characteristic cage frequency, FTF:0.43 Hz; Characteristic outer ring frequency, BPF0:5.13 Hz; Brand:NTN; Characteristic inner ring frequency, BPFI:6.87 Hz; da max:14.5 mm; f0:15.3; |
| OH 31/800 H Adapter Sleeve | N:14mm; Designation of bearing:EX206-20G2T20; A:40 mm; B:36.4 mm; H2:82 mm; C0:11.2 kN; d:31.75 mm; N1:22 mm; B1:48.3 mm; H:42.9 mm; |
| 1730 Self Aligning Ball Bearing | d:3.5000 in; Cup Part Number:98788-B; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:30400 lbf; Aa - Cage-Cone Backface Clearance:0.31 in; a - Effective Center Location3:0.05 in; Y - ISO Factor9:0.95; C0 - Static Radial Rating:117000 lbf; Cone Part Number:98350; K - Factor7:0.92; da - Cone Frontface Backing Diameter:4.41 in; |
| H3032 Adapter Sleeve 140X160X190mm | S:19 mm; Weight:2.38 kg; T min.:-20 °C; Z:70 mm; J:146 mm; B:49.2 mm; H2:108 mm; C:31.85 kN; Dz:95 mm; A1:37 mm; |
| 2212 Bearing | Characteristic cage frequency, FTF:0.4 Hz; Characteristic inner ring frequency, BPFI:5.44 Hz; Da max:65.5 mm; ra max:1 mm; D:72 mm; Fatigue limit load, Cu:0 kN; Nlim:50 rpm; f0:13.8; rs min:1.1 mm; Brand:SNR; |
| OKB 1317K Self-Aligning Ball Bearings | Shape:T-Shaped; Height Indication:Height Selection; Type:Bearings with Housin; Days to Ship:8 Days; Seals:DD (Contact Rubber S; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Holder Surface Treatment:Not Provided; |
| Self-Aligning Ball Bearing 1218, 1218K | Adapter sleeve reference:HLK2306; Weight:1.07 kg; d1:45 mm; Designation of bearing:LK206G2H; A1:25 mm; Z:52.3 mm; B:18 mm; B1:32 mm; H:42.9 mm; s1:19.7 mm; |
| 2312K Self Aligning Ball Bearing | Bearing I.D. d(mm):17; Bearing Used:Deep Groove Ball Bea; Height H(mm):30 ～ 50; Type:Bearings with Housin; Seals:ZZ (Double Shield); Bearing Material:Stainless Steel; C Chamfered:Not Provided; Shape:T-Shaped; Lateral Width L(mm):64; Holder Surface Treatment:Clear Anodize; |
| 2307k Bearing | Adjustment Screw Bore N:22.2 mm; Dimension T:0.874 in; Static Load Rating:1750 lbf; Inside Ring Width B:21.44 mm; Slot Width A1:13.5 mm; Weight:3.21 lb; Shaft Length L1:67.5 mm; Dimension L2:12.70 mm; Series:Standard; Height H2:57.2 mm; |
| 22208CA Bearing | Cylinder shape (suffix symbol: X):No; Number of Raceway Ring Rows:Single Row; Combination of two pieces:Standard; Raceway Ring Shape:Cylindrical Roller; Revolution Frequency(rpm):5900; Inner/Outer Ring Material:Steel; Load Direction:Radial; Shaft Bore Config.:Cylindrical Bore; Days to Ship:6 Days; |
| 2311 Self-Aligning Ball Bearings 55X120X43MM | Shape:T-Shaped; RoHS:6; Height H(mm):40 ～ 80; Seals:DD (Contact Rubber S; Bearing Part Number:6904; Height Indication:Height Selection; Width T(mm):15; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; |
| H3176 Adapter Sleeve 360X380X490mm | Diameter series symbol:Used for Light load; Machining:Cast iron cover moun; Basic Load Rating, Static Rating(N):40100; Grease Type:Standard Grease; Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):57200; Unit, Type:Insert Bearing Unit; Fit:J7; Stroke:No; |