| 22230MB Self-Aligning Roller Bearings 140X270X73MM | D:76.99 mm; T:17.46 mm; r1a max:1.5 mm; Mass:0.31 kg; Nlim (oil):6,300 rpm; Y0:0.65; a:17.66 mm; Characteristic outer ring frequency, BPF0:8.85 Hz; Characteristic inner ring frequency, BPFI:11.15 Hz; Max operating temperature, Tmax:120 °C; |
| 22222N Self-aligning Ball Bearing | Holder Surface Treatment:Not Provided; Number of Bearings:Double; Flange Shape:Round Type; Bearing Part Number:6904; Bearing Retained:No; Bearing I.D. d(mm):20; Width T(mm):45 ～ 70; Shape:Flanged Pilot Type; Seals:ZZ (Double Shield); Type:Bearings with Housin; |
| Self-Aligning Ball Bearing 1218, 1218K | Nref:8,900 rpm; D1:74.4 mm; Mass:0.27 kg; a min:2.29 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:21.1 kN; rNa max:0.5 mm; b max:2.2 mm; Characteristic cage frequency, FTF:0.43 Hz; Ca max:4.19 mm; |
| 2305 Bearing 25*62*24mm | Unit Body Material:Cast Iron; B:82.6; Basic Load Rating, Static Rating(N):48300; Unit, Type:Insert Bearing Unit; Stroke:No; RoHS:6; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel; |
| 22344MB Self-Aligning Roller Bearings 200X460X145MM | Unit, Type:Insert Bearing Unit; Bearing Unit, Type:Pillow Type; Pillow Type, Category:Thick Wall; Basic Load Rating, Static Rating(N):17800; Bearing Inner Dia. Shape:Cylindrical Bore Set; Accessory:With cast iron cover; Grease Type:SH44M; Basic Load Rating, Dynamic Rating(N):29100; d:40; |
| 2203 Bearing | Cage Type:CR - Phenolic Outer; Ce - Dynamic Radial Rating1:16800 N; D:55.000 mm; Design Units:METRIC; R - Inner Ring To Clear Radius2:1.0 mm; Contact Angle:15 º; da - Inner Ring Backing Diameter:35.900 mm; d:30 mm; Limiting Speed (Oil):61200 rpm; C0 - Static Radial Rating:9167 N; |
| 2207 Self-Aligning Ball Bearings | B1:43.7 mm; J:95.3 mm; T max.:200 °C; Designation of bearing:ES209G2T20; E:15 mm; L:120 mm; S:11 mm; H2:107 mm; Z:84.5 mm; Designation of housing:PAE209N-; |
| 2214 Bearing 70x125x31mm | G2 - Heat Generation Factor (Rib-Roller End):4; Db - Cup Backface Backing Diameter:43.94 mm; Bearing Weight:0.20 Kg; Cg - Geometry Factor:0.0452; Cage Type:Stamped Steel; r - Cup Backface To Clear Radius2:0.51 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1140 lbf; R - Cone Backface To Clear Radius1:2.290 mm; Cone Part Number:09075; da - Cone Frontface Backing Diameter:23.88 mm; |
| Self Aligning Ball Bearing 1310 | A:26.5 mm; N:14mm; J1:45 mm; B1:38.9 mm; Designation of housing:FAE207-; H3:82.5; C0:15.2 kN; Recommended tightening torque for set screw:8 Nm; e:15 mm; T min.:-20 °C; |
| 2312K Self Aligning Ball Bearing | Bearing I.D. d(mm):17; Bearing Used:Deep Groove Ball Bea; Height H(mm):30 ～ 50; Type:Bearings with Housin; Seals:ZZ (Double Shield); Bearing Material:Stainless Steel; C Chamfered:Not Provided; Shape:T-Shaped; Lateral Width L(mm):64; Holder Surface Treatment:Clear Anodize; |
| 1204 Self-Aligning Ball Bearings | A:24 mm; d1:44.1 mm; J1:40 mm; A2:39.7 mm; T max.:200 °C; N:11,5mm; e:13 mm; s1:27.8 mm; H:142 mm; G:R1/8"; |
| 1307 Bearing 35x80x21mm | Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Flange Shape:Compact Type; Bearing Part Number:605; Number of Bearings:Double; RoHS:6; |
| 1318 Bearing 90*190*43mm | Shape:Flanged Pilot Type; Number of Bearings:Double; Type:Bearings with Housin; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Width T(mm):25; Volume Discount:Available; Flange O.D. H(φ):47; |
| 2316 Bearing 80x170x58mm | B:31 mm; H:31.8 mm; Z:16.5 mm; s1:15.5 mm; Recommended tightening torque for set screw:3.7 Nm; L:126.5 mm; A1:22.5 mm; C0:6.65 kN; A:32 mm; Designation of bearing:UC203-11G2T04; |
| 1311 ETN9 Bearing 55x120x29mm | Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):25; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Flange O.D. H(φ):88; Number of Bearings:Double; |
| Self-aligning Ball Bearing 22208CC/W33 | Characteristic outer ring frequency, BPF0:7.19 Hz; Fatigue limit load, Cu:14.3 kN; d:55 mm; Da max:92 mm; db min:68 mm; Static load, C0:117 kN; Nlim:8,300 rpm; da max:65 mm; da min:63 mm; r1s min:1.1 mm; |