| 1309 Self Aligning Ball Bearing | C:31.85 kN; s1:24.6 mm; C0:20.8 kN; E:24 mm; A5:30.2 mm; Designation of housing:EHE209-; Weight:1.98 kg; A:40 mm; G1:M24; L1:90 mm; |
| 1205 Self Aligning Ball Bearing | SW:3.18 mm; Designation of bearing:UC205-14G2L4; L3:38 mm; Weight:0.71 kg; A2:35 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; T min.:-20 °C; G1:M20; Designation of housing:EHE205-; |
| 21311cc Self Aligning Ball Bearings 55x120x29 | A2:45.9 mm; G:R1/8"; S:17.4 mm; T min.:-20 °C; C0:7.88 kN; J:99 mm; N:11,5mm; L:70 mm; B:34.8 mm; d1:37.4 mm; |
| 2211 Bearing 55x100x25mm | s1:24.6 mm; L1:90 mm; H:110 mm; C0:20.8 kN; d:41.28 mm; G:R1/8"; C:31.85 kN; T max.:200 °C; Recommended tightening torque for set screw:8 Nm; G1:M24; |
| 2312 Bearing 60x130x46mm | T max.:100 °C; L:108 mm; Dz:95 mm; H:188 mm; d:44.45 mm; e:22 mm; Z:56.9 mm; A2:52.2 mm; Recommended tightening torque for set screw:8 Nm; Weight:1.98 kg; |
| 22209MB Self-Aligning Roller Bearings 45X85X23MM | Bearing Used:Deep Groove Ball Bea; RoHS:6; Seals:ZZ (Double Shield); Number of Bearings:Single; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Lateral Width L(mm):38; Bearing Material:[Steel] Steel; Days to Ship:8 Days; |
| 23176CA/MB/CC/CAKW33 380*620*194 Mm | Fit:J7; Days to Ship:Quote; Accessory:No Cover; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Diameter series symbol:Used for Light load; Surface Treatment:No; Basic Load Rating, Static Rating(N):17800; |
| 1412 1412H Self Aligning Ball Bearing | Maximum Speed:1320 rpm; Note:This product line wa; Support Type:Four-Bolt Plummer Bl; Housing Width:8.0 in; Bearing UPC:013992032881; Bearing Type:Split Cylindrical Ex; Dimension K :4-1/4 in; Seal Type:Kevlar Packing Seal; Cr - Dynamic Load Rating:164289 lbf; Dimension J1 :21-5/8 in; |
| Nj212 Bearing | Rolling Element Material:Steel; Basic Load Rating, Dynamic Rating(N):665000; Inner/Outer Ring Material:Steel; Combination of two pieces:Standard; Precision (JIS):Grade 0; High-Speed Steel:Standard; B:65; Raceway Ring Shape:Cylindrical Roller; Load Direction:Radial; |
| 23240CA Self-Aligning Roller Bearings 200X360X128MM | Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):4.12; d:0.4992 in; K - Factor8:1.29; B - Cone Width:0.4326 in; C90 - Dynamic Radial Rating (90 million revolutions)5:767 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:5150 lbf; db - Cone Backface Backing Diameter:0.69 in; Cone Part Number:A4049; a - Effective Center Location4:-0.1 in; |
| OKB 1317K Self-Aligning Ball Bearings | Shape:T-Shaped; Height Indication:Height Selection; Type:Bearings with Housin; Days to Ship:8 Days; Seals:DD (Contact Rubber S; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Holder Surface Treatment:Not Provided; |
| 30 mm x 55 mm x 13 mm 1211 Self-Aligning Ball Bearings 55X100X21MM | A2:45.5 mm; B1:43.5 mm; A1:10 mm; N:11,5mm; G:R1/8"; e:19 mm; C:12.8 kN; J:63.5 mm; C0:6.65 kN; Weight:0.79 kg; Size (mm):30 mm x 55 mm x 13 mm ; |
| 23138MB Self-Aligning Roller Bearings 190X320X104MM | L3:51 mm; H2:51 mm; S:14.3 mm; Designation of bearing:UC205-14G2T20; H1:76 mm; L:97 mm; A:32 mm; A1:12 mm; N2:32 mm; C:14 kN; |
| 72212C/72487 Taper Roller Bearing | Inner ring reference:No; C2:31 mm; Dw:4 mm; Characteristic outer ring frequency, BPF0:8.08 Hz; Mass:0.09 kg; Characteristic cage frequency, FTF:0.45 Hz; Characteristic inner ring frequency, BPFI:9.92 Hz; Min operating temperature, Tmin:-20 °C; D:45 mm; Characteristic rolling element frequency, BSF:9.65 Hz; |
| 2222 Self Aligning Ball Bearing | B - Outer Ring Width:515.000 mm; UPC Code:087796141926; Bearing Weight:3054.300 Kg; Bore Taper:1/30; Reference Thermal Speed Rating (Oil)7:80; Design Unit:METRIC; Reference Thermal Speed Rating (Grease):80; Cage Type:YMD; C0 - Static Radial Rating:50300000 N; Y0 - ISO Factor4:2; |
| 22210CCK/W33 Self-aligning Ball Bearing | Bearing Retained:No; Type:Bearings with Housin; Flange Shape:Round Type; RoHS:6; Bearing Material:[Steel] Steel; Flange O.D. H(φ):56; Holder Surface Treatment:Not Provided; Shape:Flanged Pilot Type; |