| 1217 Self Aligning Ball Bearings 85x150x28 | H:90 mm; Designation of housing:PH206N-; d:30 mm; s1:19.05 mm; J:121 mm; T max.:100 °C; B:38.1 mm; L:165 mm; Dz:70 mm; A1:28 mm; |
| 1211K Self Aligning Ball Bearing | Bearing I.D. d(mm):20; Bearing Retained:Yes (with retaining; Flange O.D. H(φ):69; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Shape:Flange Type; Type:Bearings with Housin; Bearing Part Number:6904; |
| 1322 Bearing | Internal Clearance:C3-Loose; Outside Diameter:1.654 Inch | 42 Mill; maximum rpm:21000 RPM; bearing material:High Carbon Chrome S; inner ring width:12 mm; D:42 mm; outside diameter:42 mm; snap ring included:Without Snap Ring; Cage Material:Steel; Harmonized Tariff Code:8482.10.50.68; |
| 22311 CAC/W33 Self Aligning Ball Bearings 55X120X43 | H(inch):1.38 ～ 2.5; Seals:ZZ (Double Shield); Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Holder Surface Treatment:Clear Anodize; Bearing Part Number:6005; |
| 22308 Self Aligning Roller Bearing | I.D.(Ø):20; O.D.(Ø):52; Width(mm):15; Seal, Shield Symbols:No; RoHS:6; Holder Symbol:W; Rolling Element Material:[Steel] Steel; Load Direction:Radial; Preload:Normal preload; Special Configurations Code:No; |
| 23128MB Self-Aligning Roller Bearings 140X225X68MM | Shape:Flange Type; Flange Shape:Compact Type; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; RoHS:6; Bearing I.D. d(mm):12; Type:Bearings with Housin; |
| 1312 ETN9 Bearing 60x130x31mm | Surface Treatment:No; Unit, Type:Bearing unit; Days to Ship:Quote; Unit Body Material:Cast Iron; Bearing Unit, Type:Diamond Flange Shape; Basic Load Rating, Dynamic Rating(N):12800; Temperature Properties:Standard; Lubrication method:Oil Supply Type; |
| Self-aligning Ball Bearing 1308 K | Basic Load Rating, Static Rating(N):61900; Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Accessory:With cast iron cover; RoHS:6; Diameter series symbol:Used for Light load; d:75; Seal:Triple seals; Basic Load Rating, Dynamic Rating(N):84000; |
| 1204 Self-aligning Ball Bearing | C - Cup Width:53.658 mm; Cup Part Number:93134; G1 - Heat Generation Factor (Roller-Raceway):912.5; G2 - Heat Generation Factor (Rib-Roller End):126.1; B:71.120 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:164000 lbf; db - Cone Backface Backing Diameter:230.12 mm; e - ISO Factor8:0.52; C90 - Dynamic Radial Rating (90 million revolutions)4:42600 lbf; Cage Type:Stamped Steel; |
| 22311 Self-aligning Roller Bearing | Designation of open end cover:SCOE210-50; d:50 mm; Recommended tightening torque for set screw:11.5 Nm; H:190 mm; T max.:100 °C; A2:60.1 mm; B:49.2 mm; L1:94 mm; N:15mm; e:22 mm; |
| 2221 Self-Aligning Ball Bearings | Outside Diameter D:9.000 mm; Features:Open; Oil Limiting Speed:78000 rpm; Grease Limiting Speed:66000 rpm; Radius Rs min:0.150 mm; Bore Size d:3.000 mm; C0r - Static Load Rating:0.19 kN; Outside Ring Width B:3.000 mm; Weight:0.0009 Kg; Cr - Dynamic Load Rating:0.57 kN; |
| 127 127T Bearing 7x22x7mm | R - Cone Frontface To Clear Radius2:0.060 in; Cone Part Number:67388D; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:21400 lbf; K - Factor7:1.7; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.09 in; C1 - Dynamic Radial Rating (1 million revolutions)1:82600 lbf; B - Double Cone Width:3.6250 in; d:5 in; db - Cone Backface Backing Diameter:5.51 in; |
| 11228M Self Aligning Ball Bearing 140x250x40mm | Da - Cup Frontface Backing Diameter:3.70 in; Db - Cup Backface Backing Diameter:3.50 in; e - ISO Factor2:0.35; Cup Part Number:383; Design Units:Imperial; D:3.9370 in; r - Cup Backface To Clear Radius1:0.08 in; Series:385; C - Cup Width:0.8268 in; Cg - Geometry Factor:0.0859; |
| 2311 Self-aligong Ball Bearing 55X120X46mm | I.D. V(φ):25; Material:1045 Carbon Steel; Volume Discount:Available; RoHS:6; Surface Treatment:Not Provided; Days to Ship:8 Days; Shape:Flat Square Flanged; |
| 2310 Bearing | Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):35; Shape:Flanged Pilot Type; Housing Material:[Aluminum Alloy] 201; Number of Bearings:Double; |
| H3040 Adapter Sleeve 180X200X240mm | e:15 mm; T max.:100 °C; d:20 mm; H:113 mm; A:25.5 mm; S:12.7 mm; A1:11 mm; Designation of housing:FL204-; J:90 mm; Recommended tightening torque for set screw:5.5 Nm; |