| 29252E Thrust Spherical Roller Bearing | C - Cup Width:42.863 mm; Cup Part Number:134145; G1 - Heat Generation Factor (Roller-Raceway):1330; Series:134000; Db - Cup Backface Backing Diameter:340.11 mm; Aa - Cage-Cone Backface Clearance:7.6 mm; C0 - Static Radial Rating:299000 lbf; K - Factor7:1.56; R - Cone Backface To Clear Radius1:6.35 mm; Ab - Cage-Cone Frontface Clearance:3 mm; |
| 24034CA Self-Aligning Roller Bearings 170X260X90MM | d:140 mm; B:145 mm; J:350 mm; A:125 mm; C:275 kN; T max.:100 °C; s1:72.5 mm; S:59 mm; Recommended tightening torque for set screw:120 Nm; G:M10x1; |
| 29468E Thrust Spherical Roller Bearing | Diameter series symbol:For Heavy Load; Unit Body Material:Cast Iron; Stroke:No; Unit, Type:Insert Bearing Unit; Basic Load Rating, Static Rating(N):77200; Bearing Unit, Type:Square flange shape; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Days to Ship:Quote; |
| H2314 Adapter Sleeve 60X70X92mm | Characteristic inner ring frequency, BPFI:9.78 Hz; db min:109 mm; E:145 mm; Nlim (oil):4,100 rpm; Da max:151 mm; da max:105 mm; Characteristic outer ring frequency, BPF0:7.22 Hz; Mass (without HJ ring):3.24 kg; B:40 mm; Nlim (grease):3,500 rpm; |
| 1318 Self-aligning Ball Bearing | C - Cup Width:34.925 mm; C0 - Static Radial Rating:311000 lbf; a - Effective Center Location3:42.9 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:29300 lbf; Db - Cup Backface Backing Diameter:455.93 mm; Cg - Geometry Factor:0.19; D:479.425 mm; da - Cone Frontface Backing Diameter:394.97 mm; Design Units:Imperial; Aa - Cage-Cone Backface Clearance:5.6 mm; |
| 1309 Self-Aligning Ball Bearings 45X100X25MM | Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Width T(mm):25; Seals:DD (Contact Rubber S; Flange O.D. H(φ):47; Bearing Material:[Steel] Steel; Flange Shape:Round Type; Number of Bearings:Double; |
| 1310TV Self-aligning Bearing 50x110x27mm | T max.:100 °C; A4:30 mm; Designation of bearing:UC211-35G2; B:55.6 mm; d:55.56 mm; L:185 mm; s1:27.8 mm; T min.:-20 °C; A:42 mm; Z:37.7 mm; |
| 2212 Bearing | Characteristic cage frequency, FTF:0.4 Hz; Characteristic inner ring frequency, BPFI:5.44 Hz; Da max:65.5 mm; ra max:1 mm; D:72 mm; Fatigue limit load, Cu:0 kN; Nlim:50 rpm; f0:13.8; rs min:1.1 mm; Brand:SNR; |
| 2214 Bearing 70*125*31mm | Basic Load Rating, Static Rating(N):69000; Symbol of contact angle:C; Load Direction:Radial; Outer Ring:With Outer Ring; Precision Grade Symbol:P5; Size Standards:Metric System; Preload:Light Preload; Seal, Shield Symbols:No; Retainer Type:Resin Forming; |
| 2220K Bearing | RoHS:6; d:25; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):14000; Unit Body Material:Cast Iron; Stroke:No; Grease Type:Standard Grease; Fit:J7; |
| 22208K, 40X80X23mm, 22208CC/W33, 22208CCK/W33+H308, 22208TN1/W33 Self-aligning Roller Bearing | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:16900 lbf; Cage Type:Stamped Steel; B - Cone Width:1.1875 in; a - Effective Center Location4:-0.26 in; Ab - Cage-Cone Frontface Clearance:0.13 in; G2 - Heat Generation Factor (Rib-Roller End):23.7; G1 - Heat Generation Factor (Roller-Raceway):84.3; Cg - Geometry Factor:0.107; Aa - Cage-Cone Backface Clearance:0.05 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:65300 lbf; |
| 1211 Bearing 55x100x21mm | Oil Lubrication - T Seal:3800 rpm; Dimension J (Bolt Size):0.625 in; Full Timken Part Number:QAAP11A055SB; Oil Lubrication - B/C/O Seal:1600 rpm; Locking Style:Double Concentric; Y1 - Geometry Factor:2.95; Float:0.050 in; Dimension RAA:0.69 in; Engineering Group:Mounted Bearing; Pre Install Clearance Max:0.0026 in; |
| 1302 Bearing 15x42x13mm | Cover Type:Steel plate single c; Bearing Unit, Type:Take-Up Type; Seal:No; Basic Load Rating, Static Rating(N):11300; Days to Ship:Quote; d:30; Temperature Properties:Standard; Unit, Type:Bearing unit; |
| 22318CK Self Aligning Roller Bearing | J1:66 mm; T max.:200 °C; d:34.92 mm; Designation of open end cover:SCOU207-22; T min.:-20 °C; H:161 mm; L:90 mm; N:15mm; s1:21.45 mm; C0:15.2 kN; |
| H2330 Adapter Sleeve 135x150x195mm | A:25.5 mm; T max.:200 °C; J:78 mm; T min.:-20 °C; C0:4.78 kN; Weight:0.33 kg; B:19.1 mm; J1:40 mm; L:60 mm; d:17 mm; |
| 2215 Bearing 75x130x31mm | Bearing Retained:No; Bearing Material:[Steel] Steel; Flange Shape:Square Type; Bearing I.D. d(mm):8; Seals:DD (Contact Rubber S; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; |