| 1305K Bearing | Housing Width A:63.00 mm; Dimension B1:3.228 in; Static Load Rating:13916 lbf; Dynamic Load Rating:18884 lbf; Dimension A0:3.25 in; Bolt Hole Size N:23.00 mm; Grease Nipple Size:A-R1/8; Flange Thickness A1:24.00 mm; Total Length L:220.00 mm; Bearing Unit - Adapter Sleeve:UK217 - H2317; |
| Self-aligning Roller Bearing 22224CCK/W33+H3124 | Z:39.1 mm; T max.:200 °C; B:27 mm; A1:7 mm; J:90 mm; Recommended tightening torque for set screw:3.7 Nm; C:14 kN; e:10 mm; T min.:-20 °C; Designation of open end cover:SCOU205-15; |
| 2306TN1 1606A Self Aligning Ball Bearing | Da - Outer Ring Backing Diameter:264.500 mm; Design Units:METRIC; d:200 mm; Contact Angle:15 º; r - Outer Ring To Clear Radius3:2.1 mm; Limiting Speed (Oil):9200 rpm; Bearing Width:38 mm; C0 - Static Radial Rating:243300 N; da - Inner Ring Backing Diameter:216.000 mm; do - Ball Diameter:23.81250 mm; |
| 1311 Bearing | rNs min:0.5 mm; Weight / LBS:3.96832; b min:3.1 mm; b max:3.4 mm; Min operating temperature, Tmin:-60 °C; Radial clearance class:C3; Snap Ring:Yes; Manufacturer Name:NTN; a min:4.65 mm; Weight / Kilogram:1.81; |
| 22318CK Self Aligning Roller Bearing | J1:66 mm; T max.:200 °C; d:34.92 mm; Designation of open end cover:SCOU207-22; T min.:-20 °C; H:161 mm; L:90 mm; N:15mm; s1:21.45 mm; C0:15.2 kN; |
| 22310 Self-aligning Roller Bearing | Designation of housing:FE205-; e:19 mm; C:14 kN; A2:38.7 mm; B:34 mm; A1:11 mm; S:14.3 mm; Designation of bearing:UC205G2L4; Weight:0.81 kg; Recommended tightening torque for set screw:5.5 Nm; |
| 23038CA Self-Aligning Roller Bearings 190X290X75MM | Grease Type:Standard Grease; Fit:J7; Surface Treatment:No; d:25; Stroke:No; Accessory:With steel plate cov; Unit Body Material:Cast Iron; Bearing Inner Dia. Shape:Tapered hole adapter; Basic Load Rating, Static Rating(N):11300; |
| Self-Aligning Ball Bearing 1211, 1211K | Series Type:Heavy Series; Housing Width:9.1 in; Support Type:Four-Bolt Plummer Bl; Cr - Dynamic Load Rating:233127 lbf; Bearing Number:HSE511BX; Bearing Type:Split Cylindrical Ex; Dimension J:22.0 in; Dimension H2:21.1 in; Maximum Speed:1220 rpm; Dimension K:4.7 in; |
| 23028CAK Self Aligning Roller Bearing | Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway):88.6; C0 - Static Radial Rating:41200 lbf; d:2.8750 in; a - Effective Center Location4:0.09 in; Cg - Geometry Factor:0.124; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:3.19 in; G2 - Heat Generation Factor (Rib-Roller End):36.6; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:12000 lbf; |
| 1412 Self-aliging Ball Bearing 60x150x35mm | d1:62 mm; G:M6x1; B:22 mm; Designation of housing:C209-; d:45 mm; T max.:100 °C; T min.:-20 °C; s1:23.2 mm; Designation of bearing:LK209G2H; A3:2 mm; |
| 2316 80*170*58mm | Cor - Static Load Rating:36179 lbf; Series Type:Light Series; Support Type:Two-Bolt Plummer Blo; Housing Width:4.4 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension M :3-1/2 in; Bearing Number:LSE215BX; Dimension L :12-19/32 in; Shaft Size:2-15/16 in; Dimension J2 :9-7/8 in; |
| 1219 Bearing 95x170x32mm | C:52.5 kN; d:60.32 mm; s1:53.2 mm; Recommended tightening torque for set screw:16.8 Nm; L:195 mm; A1:15 mm; T min.:-40 °C; Designation of housing:FC212-; C0:32.8 kN; J:160 mm; |
| 2222 Self-aligning Ball Bearings | b:17 mm; Category:Bearings; Ew:30 mm; Min operating temperature, Tmin:-20 °C; C0r:25.2 kN; Mass:0.02 kg; Lw:13.8 mm; Inventory:0.0; Nlim (oil):17,000 rpm; Characteristic rolling element frequency, BSF:8.89 Hz; |
| NN3056 Bearing 280X420X65mm | L3:51 mm; B:34 mm; s1:30.5 mm; H2:51 mm; d:20 mm; G:M6x1; H:89 mm; Designation of housing:T204N-; Z:15.7 mm; A:32 mm; |
| Self-aligning Ball Bearing 13948 | Reference Thermal Speed Rating (Grease):570; Y2 - ISO Factor6:2.09; Cage Type:EMB; Reference Thermal Speed Rating (Oil)7:640; Superseded Part:24068YMBW33W45AC4; e - ISO Factor3:0.32; Bearing Weight:139.000 Kg; r - Outer Ring To Clear Radius2:4.000 mm; Y1 - ISO Factor5:3.18; B - Outer Ring Width:180.000 mm; |
| Bronze Backing Self-lubricating Bushings LM011 (SF-1B) | Surface Treatment:No; Pillow Type, Category:Standard; Unit, Type:Insert Bearing Unit; d:65; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel; Accessory:No Cover; B:76.2; |