No. | Brand | G | c | B | S | N | e | d | P |
120 | - | - | - | - | - | - | - | 50 mm | - |
7318BECBJ | - | - | - | 10 | - | - | - | - | - |
(SF-10S) | - | - | - | - | - | 16mm | 16 mm | - | - |
0820024610 | Rexroth | - | - | - | - | M12 | - | - | - |
UC204-12 | Asahi | - | - | - | 18.2 mm | - | - | - | - |
1986-2001 | Nachi | - | - | - | - | - | - | 17 | - |
CR1857 | - | - | - | - | - | - | - | - | - |
NU305EV10 | NTN | M6x1 | - | - | 17 mm | 12mm | - | - | - |
1.22*2.44m | - | - | - | - | - | - | - | - | - |
2017 | - | - | - | 74.6 mm | - | 19mm | - | 76.2 mm | - |
6806 | - | - | - | 31 mm | - | 13mm | - | 19.05 mm | - |
1220*2440*18mm | - | M6x1 | - | - | 15.9 mm | 14mm | - | - | - |
HA590202 | Timken | - | - | - | - | - | - | - | - |
6001ZZ | - | - | - | - | - | - | - | - | - |
6214-ZZ | - | - | - | - | - | - | - | - | - |
GSX1100 | - | - | - | - | - | - | - | - | - |
750 | NTN | - | - | - | - | - | - | - | - |
30W | - | - | - | 12.7 mm | - | - | - | - | - |
12mm | INA | - | - | - | - | - | - | 20 mm | - |
EX35 | NSK | - | - | - | - | - | - | - | - |
6018 | NSK | - | - | - | - | - | - | - | - |
(SWA801-15/150) | - | - | - | - | 17.5 mm | - | - | - | - |
2003-2009 | Dodge | - | - | - | - | - | - | - | - |
IR12X16X14 | INA | - | - | - | - | - | - | - | - |
600 | fag | - | - | 49.2 mm | - | M12 | - | - | - |
410ml | - | - | - | - | - | - | - | 17 | - |
634 | - | - | - | - | - | - | - | - | - |
1203 ETN9 Bearing 17x40x12mm | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:4350 lbf; da - Cone Frontface Backing Diameter:0.85 in; C0 - Static Radial Rating:9100 lbf; Cone Part Number:09062; Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:1140 lbf; Series:09000; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:16800 lbf; Cage Type:Stamped Steel; Cg - Geometry Factor:0.0452; |
1217 1217K Self-aligning Ball Bearings | Recommended tightening torque for set screw:8 Nm; A1:12 mm; H3:105; s1:39.7 mm; Designation of housing:FCE209-; B1:56.3 mm; L:155 mm; S:21.4 mm; T max.:100 °C; B:42.8 mm; |
Leed Free Self-lubricating Bushing LM023(SF-2L) | F:49.5 mm; Mass (without HJ ring):0.49 kg; E:71.5 mm; Nref:6,300 rpm; Characteristic inner ring frequency, BPFI:8.27 Hz; d:40 mm; Static load, C0:79.8 kN; D1:68.3 mm; Fatigue limit load, Cu:9.7 kN; r1s min:1.1 mm; |
23020CA 23020CA/W33 Self-aligning Roller Bearing | a - Effective Center Location4:12.7 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:147000 N; Cage Type:Stamped Steel; C0 - Static Radial Rating:392000 N; WPD:177.4 mm; db - Cone Backface Backing Diameter:120 mm; K - Factor8:0.67; Design Units:METRIC; Series:90000; Cone Part Number:J90354; |
0.472 Inch | 12 Millimeter x 0.63 Inch | 16 Millimeter x 0.551 Inch | 14 Millimeter 2203-2RS,2203-2RS-TVH Sealed Self-aligning Ball Bearing | Cone Part Number:74556; db - Cone Backface Backing Diameter:6.22 in; C1 - Dynamic Radial Rating (1 million revolutions)6:79500 lbf; R - Cone Backface To Clear Radius3:0.14 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:35900 lbf; Cg - Geometry Factor:0.134; G2 - Heat Generation Factor (Rib-Roller End):68.5; G1 - Heat Generation Factor (Roller-Raceway):362.9; da - Cone Frontface Backing Diameter:5.98 in; |
23028C Self Aligning Roller Bearing | Type:Bearings with Housin; Bearing Part Number:6004; Seals:VV (Non-Contact Rubb; Volume Discount:Available; Flange Shape:Square Type; Flange O.D. H(φ):77; Housing Material:[Aluminum Alloy] 201; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Bearing I.D. d(mm):20; |
23072CA, 23072CK/W33, 23072CC/W33 Roller Bearing, 360X540X134mm, 23072CAK/W33 | Designation of bearing:US203G2T20; d:17 mm; J:63.5 mm; A1:10 mm; L:86 mm; Designation of housing:FE203N-; T min.:-20 °C; Recommended tightening torque for set screw:3.5 Nm; Weight:0.4 kg; A:29.5 mm; |
2317ATN Self Aligning Roller Bearing | L1:54.5 mm; Designation of housing:PE209-; N1:29 mm; G:R1/8"; s1:39.7 mm; Weight:2.37 kg; N:14mm; Recommended tightening torque for set screw:8 Nm; d:44.45 mm; d1:62 mm; |
22318CAK, 22318CC/W33, 22318CCK/W33, 90X190X64mm, 22318KTN1/W33 Self-aligning Roller Bearing | Product Group:B00308; Other Features:Deep Groove | Double; Max operating temperature, Tmax:110 °C; f0:11.4; Outside Diameter:1.378 Inch | 35 Mill; Characteristic cage frequency, FTF:0.35 Hz; Keyword String:Ball; d:10 mm; Characteristic outer ring frequency, BPF0:2.08 Hz; ra max:0.6 mm; |
22206CC Self-Aligning Roller Bearings 30X62X20MM | A2:55.8 mm; B:53.7 mm; A4:36 mm; Z:42.7 mm; A1:15 mm; T max.:200 °C; S:14.9 mm; Weight:4.7 kg; Designation of housing:FC212N-; L:195 mm; |
2202 Full Ceramic Self-aligning Ball Bearings | Designation of closed end cover:SCC206; A1:25 mm; Weight:1.04 kg; H2:83 mm; N:M10; H:42.9 mm; Designation of bearing:US206-19G2; C0:11.2 kN; B:30 mm; A:48 mm; |
1308 ETN9 Bearing 40x90x23mm | B:34.8 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:EX205-14G2T20; C:14 kN; A:36 mm; T max.:200 °C; d:22.22 mm; L:130 mm; Weight:0.75 kg; L1:39 mm; |
2207 Bearing 35x72x33mm | Bearing Retained:Yes (with retaining; Bearing Material:Steel; Days to Ship:14 Days; Shape:T-Shaped; Housing Material:[Aluminum Alloy] 201; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Height H(inch):1; |
209-NPP-B Self-aligning Deep Groove Ball Bearing 45x85x19mm | Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Bearing I.D. d(mm):10; Number of Bearings:Single; Shape:T-Shaped; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Width T(mm):10; |
22222 Self-aligning Roller Bearing | Bearing Unit, Type:Pillow Type; Diameter series symbol:For Heavy Load; Surface Treatment:No; Bearing Inner Dia. Shape:Tapered hole adapter; Stroke:No; Days to Ship:Quote; Pillow Type, Category:Thick Wall; d:125; |
22212CC Self-Aligning Roller Bearings 60X110X28MM | Preload:Normal preload; Days to Ship:Quote; Symbol of contact angle:C; Outer Ring:With Outer Ring; Contact angle(Degree):15; Width(mm):24; RoHS:6; Special Configurations Code:No; Basic Load Rating, Static Rating(N):69000; |
2216 Bearing Video