| 1222 Bearing 110*200*38mm | Designation of housing:T209N-; P:300 mm; G:M6x1; Z:24.4 mm; SW:3.97 mm; N1:19 mm; T max.:200 °C; L1:87 mm; Recommended tightening torque for set screw:8 Nm; H1:102 mm; |
| 21315 CC Self Aligning Ball Bearingsm 75x160x37 | B:41.2 mm; Weight:0.65 kg; T min.:-40 °C; Recommended tightening torque for set screw:11.5 Nm; T max.:100 °C; C:19 mm; SW:4 mm; S:10.2 mm; r:1.1; G:M8x1; |
| 21315CC Self-Aligning Roller Bearings 75X160X37MM | e:29 mm; Designation of open end cover:SCOE212-60; T min.:-20 °C; Z:85.6 mm; G:M6x1; B1:77.7 mm; J:202 mm; B:61.8 mm; A2:75.8 mm; Recommended tightening torque for set screw:22 Nm; |
| 1213ATN Self Aligning Ball Bearing | Static load, C0:75 kN; da min:68 mm; Fatigue limit load, Cu:9.1 kN; Nlim (grease):6,400 rpm; Nlim (oil):7,600 rpm; Max operating temperature, Tmax:120 °C; Da max:102 mm; Minimum Buy Quantity:N/A; da max:71 mm; Inventory:0.0; |
| 2317 Self-aliging Ball Bearing 85x180x60mm | Da max:47 mm; Characteristic outer ring frequency, BPF0:3.58 Hz; Brand:NTN; Max operating temperature, Tmax:120 °C; d:25 mm; Characteristic rolling element frequency, BSF:4.71 Hz; Min operating temperature, Tmin:-20 °C; Nlim (grease):13,000 rpm; Nlim (oil):15,000 rpm; D:52 mm; |
| 1217 Bearing | C0:23.2 kN; S:19 mm; A2:42.6 mm; B:51.6 mm; e:10 mm; A1:14 mm; T min.:-20 °C; d:50 mm; Weight:2.9 kg; A4:28 mm; |
| 24028CA Self-Aligning Roller Bearings 140X210X69MM | Bearing Part Number:605; RoHS:6; Type:Bearings with Housin; Flange O.D. H(φ):38; Flange Shape:Square Type; Holder Surface Treatment:Clear Anodize; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Width T(mm):25; |
| 1204K Self Aligning Ball Bearing | Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin; Bearing Part Number:6203; RoHS:6; Holder Surface Treatment:Black Oxide Coating; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):72; |
| 1203 Self-aligning Ball Bearings | Pillow Type, Category:Thick Wall; Machining:No; Basic Load Rating, Static Rating(N):29400; Fit:J7; Unit Body Material:Cast Iron; Surface Treatment:No; RoHS:6; Bearing Inner Dia. Shape:Tapered hole adapter; Unit, Type:Insert Bearing Unit; |
| Thrust Self-aligning Roller Bearing 29334E | Static load, C0:60 kN; Da max:129 mm; Characteristic rolling element frequency, BSF:4.07 Hz; rs min:2.1 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Dynamic load, C:92.5 kN; Characteristic outer ring frequency, BPF0:3.07 Hz; da min:76 mm; Max operating temperature, Tmax:110 °C; da max:86 mm; |
| 1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter Self-Aligning Ball Bearing 1205, 1205K | I.D.(Ø):35; Rubugado Symbol:No; Load Direction:Radial; B:21; Precision Grade Symbol:No; Specifications, Environment:Standard; Width(mm):21; Low Torque Specification:No; Basic Load Rating, Static Rating(N):19200; Retainer Type:Punching; Size (mm):1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 0.984 Inch | 25 Millimeter ; |
| H 2318 Adapter Sleeve | Bearing - Housing - Seal:HSE511BRHATL; Series Type:Heavy Series; Ca - Axial Load Rating:15602 lbf; Bearing Number:HSE511BR; Dimension P:1.7 in; Support Type:Round Flange; Dimension V:0.3 in; Bolt Size:4 x M24; Dimension R:22.6 in; Seal Type:Aluminium Triple Lab; |
| 2205 Self Aligning Ball Bearing | e - ISO Factor8:0.38; Design Units:Imperial; Y1 - ISO Factor9:1.77; Cage Type:Stamped Steel; T - Bearing Width across Cones:2.3746 in; C - Double Cup Width:1.5000 in; Cg - Geometry Factor11:0.0668; D:2.7170 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:3180 lbf; Aa - Cage-Cone Backface Clearance:0.31 in; |
| 2208 Full Ceramic Self-aligning Ball Bearings | Surface Treatment:No; d:25; Bearing Unit, Type:Take-Up Type; Unit Body Material:Cast Iron; Stroke:No; Unit, Type:Insert Bearing Unit; Grease Type:SH33M; Rolling Element Material:Bearing Steel; |
| 1730 Self Aligning Ball Bearing | Bearing Used:Deep Groove Ball Bea; Flange Shape:Round Type; Flange O.D. H(φ):50; Days to Ship:7 Days; Holder Surface Treatment:Black Oxide Coating; Number of Bearings:Double; Shape:Flanged Pilot Type; Volume Discount:Available; |
| 22376 Bearing 380x780x230mm | Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Width T(mm):12; Bearing I.D. d(mm):10; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; RoHS:6; Number of Bearings:Single; Bearing Material:[Steel] Steel; Shape:T-Shaped; |