| No. | Brand | G | c | B | S | N | e | d | P |
| 17x40x17.5 | - | - | - | - | - | - | - | 5 | - |
| (YB-S-11) | - | - | - | - | - | - | - | - | - |
| 23pcs | - | - | - | - | - | - | - | - | - |
| Hy-62 | - | - | - | 18 | - | - | - | 15 | - |
| 12X32X10 | - | - | - | - | - | - | - | - | - |
| 12mm/15mm/18mm | - | M6x1 | - | 31 mm | 12.7 mm | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 08-11 | - | - | 32 mm | - | - | - | - | - | - |
| 5 | - | - | - | - | 33.3 mm | 19mm | - | 76.2 mm | - |
| [50pcs] | - | - | - | 14 mm | - | - | - | - | - |
| 19-19-19 | INA | - | - | - | - | - | - | - | - |
| 98% | - | - | - | - | - | - | - | - | - |
| 1pcs | - | - | - | - | - | - | - | - | - |
| 5Pcs | - | - | - | - | - | - | - | 30 | - |
| 6330 | FAFNIR | - | - | - | - | - | - | - | - |
| 1.8mm-8mm | - | - | - | 23 | - | - | - | 40 | - |
| 40mm | INA | - | - | 25 mm | - | - | - | 75 mm | - |
| 1220X2440X12/15/17/17.5/18mm | - | - | - | - | - | - | - | - | - |
| 100 | - | M6x1 | - | 37.6 mm | - | 16mm | - | 35 mm | - |
| NU2308ET2X | NTN | - | - | - | - | - | - | - | - |
| 25821 | koyo | - | - | - | - | - | - | - | - |
| 22326CCJA/W33VA405 | - | - | - | 68.2 mm | 34.1 mm | 23mm | - | 69.85 mm | - |
| LM6UU | - | - | - | - | - | - | - | - | - |
| SDA25 | - | - | - | - | - | - | - | - | - |
| 915X2150 | - | - | - | - | - | - | - | - | - |
| R6 | NTN | M6x1 | - | 65.1 mm | 25.4 mm | - | 29 mm | 60 mm | - |
| 440, | John Deere | - | - | - | - | - | - | - | - |
| 1112320K 1220K Self Aligning Ball Bearing | Features:Open; Oil Limiting Speed:33000 rpm; Weight:0.0220 Kg; Radius Rs min:0.300 mm; Outside Ring Width B:9.000 mm; Grease Limiting Speed:28000 rpm; Cr - Dynamic Load Rating:4.6 kN; C0r - Static Load Rating:2 kN; Outside Diameter D:26.000 mm; Bore Size d:7 mm; |
| 1204 Self-aligning Ball Bearing | C - Cup Width:53.658 mm; Cup Part Number:93134; G1 - Heat Generation Factor (Roller-Raceway):912.5; G2 - Heat Generation Factor (Rib-Roller End):126.1; B:71.120 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:164000 lbf; db - Cone Backface Backing Diameter:230.12 mm; e - ISO Factor8:0.52; C90 - Dynamic Radial Rating (90 million revolutions)4:42600 lbf; Cage Type:Stamped Steel; |
| Widely Used Self-aligning Ball Bearing 1204 | Housing Material:[Aluminum Alloy] 201; Number of Bearings:Double; Bearing Part Number:6204; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Volume Discount:Available; Flange O.D. H(φ):81; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Bearing I.D. d(mm):20; |
| 2307k Bearing | Adjustment Screw Bore N:22.2 mm; Dimension T:0.874 in; Static Load Rating:1750 lbf; Inside Ring Width B:21.44 mm; Slot Width A1:13.5 mm; Weight:3.21 lb; Shaft Length L1:67.5 mm; Dimension L2:12.70 mm; Series:Standard; Height H2:57.2 mm; |
| 1220 K + H 220 Bearing Self-aligning Ball Bearings | Seals:VV (Non-Contact Rubb; Bearing Part Number:608; Shape:Flange Type; Number of Bearings:Double; Housing Material:304 Stainless Steel; Flange O.D. H(φ):45; RoHS:6; Type:Bearings with Housin; Bearing I.D. d(mm):8; |
| 42 mm x 78 mm x 41 mm 1207AKTN Self Aligning Ball Bearing | Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Width T(mm):60; Bearing Part Number:6003; Housing Material:1045 Carbon Steel; Seals:ZZ (Double Shield); Number of Bearings:Double; Size (mm):42 mm x 78 mm x 41 mm ; |
| H3144 Adapter Sleeve 200X220X280mm | A:36 mm; Designation of housing:PE205N-; H:36.5 mm; B:34 mm; N1:19 mm; S:14.3 mm; Dz:60 mm; Designation of bearing:UC205-15G2L3; d:23.81 mm; H2:70 mm; |
| 2311K 111611 2311 1611 Self Aligning Ball Bearing | Dimension S4:6.60 mm; Static Load Rating Co:3720 kN; Lubrication Hole Diameter h:9.5 mm; O.D. D:520.000 mm; Bore d:380.000 mm; Lubrication Groove g:19.3 mm; DUR/DOR F/E:426.000 mm; Chamfer rsmin:4.00 mm; Weight:193.000 lb; Thermal Speed Ratings - Grease:560 rpm; |
| 2205 Bearing 25x52x18mm | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:12400 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:27500 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:7120 lbf; B - Cone Width:1.1930 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:4120 lbf; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:47800 lbf; Cg - Geometry Factor:0.0903; |
| 1304k Bearing | Brand:NTN; Category:Roller Bearings; C:38.1 mm; Minimum Buy Quantity:N/A; EAN:4547359584844; r1a max:3.3 mm; Max operating temperature, Tmax:120 °C; D:196.85 mm; Inventory:2.0; Manufacturer Name:NTN; |
| 21321CA Self-Aligning Roller Bearings 105X225X49MM | d:75 mm; D:160 mm; Max operating temperature, Tmax:120 °C; Characteristic cage frequency, FTF:0.38 Hz; Mass:3.02 kg; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:4.92 Hz; Dynamic load, C:113 kN; Fatigue limit load, Cu:3.25 kN; Da max:149 mm; |
| H 3026 Adapter Sleeve | Designation of bearing:UC203G2L4; B:31 mm; N:12mm; G:M6x1; S:12.7 mm; A:25.5 mm; Recommended tightening torque for set screw:5.5 Nm; A2:33.3 mm; C0:6.65 kN; Designation of housing:F204N-; |
| 29430E Thrust Self-aligning Roller Bearing | A:38 mm; H:42.9 mm; T min.:-20 °C; Weight:0.84 kg; L:98 mm; s1:15 mm; C0:11.2 kN; C:19.5 kN; Designation of housing:PAE206-; H2:82 mm; |
| H 211 Sleeve | Seal:Silicone; Stroke:No; Diameter series symbol:Used for Light load; d:50; Bearing Inner Dia. Shape:Cylindrical Bore Set; Rolling Element Material:Bearing Steel; Surface Treatment:No; Grease Type:SH33M; Bearing Unit, Type:Square flange shape; |
| 126 TN9 Bearing 6x19x6mm | Holder Surface Treatment:Clear Anodize; Number of Bearings:Single; Shape:Flange Type; Volume Discount:Available; Housing Material:[Aluminum Alloy] 201; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Flange O.D. H(φ):47; Bearing I.D. d(mm):15; |
| OH 3072 OH 3072 H Adapter Sleeve( Matched Bearing:23072 CCK/W33, C3072 KM) | Seals:ZZ (Double Shield); Number of Bearings:Single; Holder Surface Treatment:Electroless Nickel P; Volume Discount:Available; Type:Bearings with Housin; Height Indication:Height Selection; Shape:T-Shaped; Bearing Retained:Yes (with retaining; C Chamfered:Not Provided; Days to Ship:10 Days; |
22222K/W33 Self-aligning Ball Bearing Video
FRONT WHEEL BEARING 35X64X37 - Bearings - Catalog
DAIHATSU ATRAI 7 S231G 2000-2004;DAIHATSU ATRAI 7 S221G 2000-2004;DAIHATSU BOON M310 4WD 2004-2010;DAIHATSU BOON M300 2004-2010
DAC35640037 ATV Double Radial Ball Bearing 35x64x37
Description - DAC35640037 ATV Double Radial Ball Bearing 35x64x37. TBBS only sells the highest quality radial ball bearings produced by high standard factories. Ideal for replacement and OEM applications. This bearing is also known as: Polaris: 3514342
Front Wheel Bearing 35x64x37 for DAIHATSU MITSUBISHI
Find many great new & used options and get the best deals for Front Wheel Bearing 35x64x37 for DAIHATSU MITSUBISHI Nissan Toyota at the best online
35x64x37 Bearings | Bearings Online Catalogue
All 35x64x37 bearings. ... 35x64x37 Bearings. Bearing 4T-CRI-0760LLCS200/5C (Tapered roller bearings / NTN). Bearing 4T-CRI0760 (Tapered roller bearings
Deep groove ball bearing DF0766LLUA-NTN - 35x64x37 mm
Deep groove ball bearing DF0766LLUA-NTN IN STOCK, dim : Ø int. 35 x Ø ext. 64 x th. 37 mm. SAME DAY SHIPPING. The specialist at your service for over 10
Koyo DAC3564A-1CS31 ATV Double Radial Ball Bearing
Description - Koyo DAC3564A-1CS31 ATV Double Radial Ball Bearing 35X64X37. koyo-logo-official-2-.png. These are official Koyo bearings Made in Japan
3885A015 / 3885A015 - Front Wheel Bearing (35X64X37)
1 YEAR WARRANTY: All Febest Parts come with a 1 Year Warranty backed by great customer service. ... Febest - Toyota Rear Wheel Hub - Oem: 42450-52060. Febest - Toyota Front Wheel Hub - Oem: 43550-28030