No. | Brand | G | c | B | S | N | e | d | P |
1.8mm/2mm/3mm/4mm | INA | - | - | 38.1 mm | 15.9 mm | 16mm | - | 31.75 mm | - |
4-New | - | - | - | - | - | - | - | - | - |
+0.5mm | - | - | - | - | - | - | - | - | - |
23130mb | Rollway | - | - | - | - | - | - | - | - |
10] | - | - | - | - | - | - | - | 35 | - |
3mm | - | - | - | - | - | - | - | 60 | - |
JMF64 | - | - | - | - | - | M12 | - | - | - |
12mm | - | M6x1 | - | 27 mm | - | - | - | - | - |
F6210309M | Link-Belt | - | - | - | - | - | - | - | - |
23038SW33 | fag | - | - | - | - | 20mm | - | - | - |
S606ZZ | - | - | - | - | - | - | - | - | - |
30 | - | R1/8" | - | - | - | - | 24 mm | - | - |
S.200563 | - | - | - | - | - | - | - | - | - |
XS250 | - | R1/8" | - | - | - | - | - | 41.28 mm | - |
Mkd04 | - | - | - | - | - | - | - | - | - |
1987-1994 | Timken | - | - | - | - | - | - | - | - |
1 | thk | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
2 | - | - | - | - | - | - | - | - | - |
NUP211E | - | - | - | 25 mm | - | 12mm | - | - | - |
1220*2440mm | - | - | - | - | - | - | - | 20 mm | - |
4x | - | - | - | - | - | - | - | - | - |
IP68 | - | - | - | 82 mm | - | - | - | - | - |
5180A | - | - | - | - | - | - | - | - | - |
OH 3956 H Adapter Sleeve( Matched Bearing:23956 CCK/W33) | A1:20 mm; C0:71.5 kN; Designation of bearing:UC218G2T04; B:96 mm; C:96 kN; H3:190; Weight:13.15 kg; L:265 mm; G:M10x1; s1:48 mm; |
23264/W33S0 Self Aligning Roller Bearing | Bearing Retained:Yes (with retaining; Shape:Flange Type; Bearing Material:[Steel] Steel; Flange Shape:Round Type; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):66; Type:Bearings with Housin; Bearing Part Number:6003; |
Mechanical Friction Joints, SH Bushings SHT40 40x67X57mm | G:M6x1; Designation of bearing:US211-32G2T04; B:45.3 mm; N:19mm; s1:22.65 mm; e:13 mm; A:42 mm; T min.:-40 °C; J:150 mm; Designation of closed end cover:SCC211; |
H 3124 Adapter Sleeve | Max. Allowed rpm(rpm):41100; Preload Mark:/GN; Combination symbol:G; Outer Ring Shape:Flat; Inner/Outer Ring Material:Steel; d:20; Contact angle symbol:C; D:37; Days to Ship:6 Days or more; Rolling Element Material:Steel; |
H2320 Adapter Sleeve 90X100X130mm | Set Screw Size:M6x1; Seal Type:Shroud Seal; Static Load Rating:1750 lbf; Outside Ring Width C:15.000 mm; O.D. Type:Spherical OD; Weight:0.50 lb; Dimension S1:26.9 mm; Number of Set Screws:2; Dimension B2:0.531 in; Series:Industrial; |
1202 Bearing 15x35x11mm | Seal Type:V-ring; G:M16; C1 Dynamic Load Rating:225; N1:24.00 mm; Jmin:222 mm; Bolt Qty:2; Cage Type:EJ; Shaft Diameter da:60 mm; J:230 mm; Bearing:21312; |
1217 K Bearing 85x150x28mm | S:6.5 mm; J1:40 mm; d:12 mm; C:9.55 kN; N:10mm; T max.:100 °C; T min.:-40 °C; Recommended tightening torque for set screw:5.5 Nm; Designation of closed end cover:SCCE203; B1:28.6 mm; |
1207 Self-aligning Ball Bearing 35*72*17mm | Dimension H2:21.1 in; Dimension K:6.8 in; Cor - Static Load Rating:264151 lbf; Bearing Number:MSM160BX; Weight:476 lb; Cr - Dynamic Load Rating:189289 lbf; Bolt Size:4 x M30; Seal Type:High Temperature Pac; Dimension L:23.5 in; Dimension H1:1.7 in; |
1300k Bearing | Type:Bearings with Housin; Bearing Retained:No; Number of Bearings:Single; Shape:Flange Type; Seals:VV (Non-Contact Rubb; Bearing Used:Deep Groove Ball Bea; Width T(mm):10; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Electroless Nickel P; |
22210CA Self-Aligning Roller Bearings 50X90X23MM | B:61.8 mm; H:69.9 mm; L:150 mm; A:68 mm; Designation of housing:PA212-; L1:52 mm; Weight:4.57 kg; B1:77.7 mm; N:M16; d:60 mm; |
2206K Bearing | Type:Bearings with Housin; Seals:ZZ (Double Shield); Flange Shape:Compact Type; Bearing Material:[Steel] Steel; Flange O.D. H(φ):64; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Shape:Flange Type; |
2317K Bearing | L:274 mm; Recommended tightening torque for set screw:3.7 Nm; Weight:1.88 kg; C0:11.2 kN; S:8 mm; B:30 mm; Designation of open end cover:SCOU206-20; A5:22 mm; Designation of housing:SP206-207/62N-; Dz:70 mm; |
23020CA 23020CA/W33 Self-aligning Roller Bearing | a - Effective Center Location4:12.7 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:147000 N; Cage Type:Stamped Steel; C0 - Static Radial Rating:392000 N; WPD:177.4 mm; db - Cone Backface Backing Diameter:120 mm; K - Factor8:0.67; Design Units:METRIC; Series:90000; Cone Part Number:J90354; |
1301ETN9 | Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Square flange shape; Diameter series symbol:Used for Light load; Basic Load Rating, Dynamic Rating(N):72700; Grease Type:Standard Grease; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; |
2204 Bearing | Unit, Type:Insert Bearing Unit; Fit:J7; RoHS:6; Grease Type:Standard Grease; Surface Treatment:No; Stroke:No; Seal:Triple seals; Bearing Inner Dia. Shape:Cylindrical Bore Set; Days to Ship:Quote; |
2210EKTN9 Bearing Self-aligning Ball Bearings | Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Volume Discount:Available; Bearing I.D. d(mm):10; Bearing Part Number:6000; Flange Shape:Round Type; Bearing Used:Deep Groove Ball Bea; RoHS:6; Shape:Flange Type; |
2206 ETN9 Bearing 30x62x20mm Video