| 2319 M Bearing 95x200x67mm | N:18mm; A:48.5 mm; Weight:3.76 kg; S:22.2 mm; C0:29.2 kN; A1:15 mm; s1:27.8 mm; C:43.55 kN; Recommended tightening torque for set screw:22 Nm; J:130 mm; |
| OH3052H Adapter Sleeve(matched Bearing:23052 CCK/W33) | T max.:100 °C; A:36.5 mm; G:M6x1; s1:18.5 mm; H:33.3 mm; Designation of housing:PLE205-; H1:12.8 mm; N:11mm; N1:17 mm; B:21 mm; |
| 1315 Self-Aligning Ball Bearings 75X160X37MM | Machining:No; Unit, Type:Insert Bearing Unit; Fit:J7; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Unit Body Material:Cast Iron; Grease Type:SH44M; Basic Load Rating, Dynamic Rating(N):143000; d:80; Stroke:No; |
| 1319K Bearing | Precision class:P0; Manufacturer Name:NTN; Nlim (grease):4,000 rpm; Cr:28.8 kN; Brand:NTN; B3:9 mm; Category:Bearings; Mass:0.46 kg; Weight / Kilogram:0.548; n:8 mm; |
| 160 mm x 200 mm x 20 mm 1218 Bearing 90x160x30mm | G:M16x1,5; S:40.5 mm; r:3; B1:106.4 mm; T min.:-40 °C; B2:31.8 mm; C1:14.5 mm; B:81 mm; d:80 mm; SW:8 mm; Size (mm):160 mm x 200 mm x 20 mm ; |
| 2304 Bearing | d:25.4 mm; C:14 kN; Z:47.3 mm; B:27 mm; H1:14.5 mm; T min.:-20 °C; A1:21 mm; H:36.5 mm; Designation of bearing:US205-16G2; T max.:100 °C; |
| H3044 Adapter Sleeve 200X220X260mm | O.D. Type:Spherical OD; Set Screw Size:M8x1.25; Lubrication Type:Non-Relubricatable; Outside Diameter D:2.441 in; Shaft Size d:1.181 in; Radius r:0.6 mm; Weight:0.50 lb; Angle between Set Screws:90 º; Static Load Rating:2530 lbf; Sub Series:YAE..RRB; |
| H3040 Adapter Sleeve 180X200X240mm | e:15 mm; T max.:100 °C; d:20 mm; H:113 mm; A:25.5 mm; S:12.7 mm; A1:11 mm; Designation of housing:FL204-; J:90 mm; Recommended tightening torque for set screw:5.5 Nm; |
| 127 Self Aligning Ball Bearings 7x22x7 | Bearing Inner Dia. Shape:Tapered hole adapter; Rolling Element Material:Bearing Steel; Stroke:No; Grease Type:SH33M; Pillow Type, Category:Standard; Accessory:No Cover; Seal:Silicone; Surface Treatment:No; Fit:J7; |
| 23024CA, 23024CK/W33, 23024CC/W33 Roller Bearing, 120X180X46mm, 23024CAK/W33 | D - Bearing O.D.:3.6720 in; Bearing Type:Thrust Tapered Rolle; Steering Pivot Rating:19400 lbf; Oil Holes in Retainer:Yes; Weight:1.7 lb; R - Fillet Radius Shaft (Max):0.13 in; B:1.0310 in; d - Bore Diameter:2.0100 in; |
| 40 mm x 68 mm x 15 mm 1316 Bearing 80x170x39mm | A4:54 mm; S:40 mm; G:M10x1; Weight:17.34 kg; A:74 mm; e:24 mm; T max.:100 °C; d:85 mm; Recommended tightening torque for set screw:64 Nm; N:31mm; Size (mm):40 mm x 68 mm x 15 mm ; |
| 1305 ETN9 Bearing 25x62x17mm | Number of Bearings:Double; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):44; Days to Ship:7 Days; Bearing Retained:No; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:626; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; |
| 2210K Self Aligning Ball Bearing | G2 - Heat Generation Factor (Rib-Roller End):15.7; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:42200 lbf; db - Cone Backface Backing Diameter:2.56 in; da - Cone Frontface Backing Diameter:2.4 in; B - Cone Width:0.8640 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3810 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:24200 lbf; Aa - Cage-Cone Backface Clearance:0.03 in; |
| 1319 Bearing 95x200x45mm | Recommended tightening torque for set screw:16.8 Nm; H1:15 mm; S:14.9 mm; Dz:120 mm; E:25 mm; H:69.9 mm; s1:26.85 mm; B:53.7 mm; N:M16; C:52.5 kN; |
| Self-Aligning Ball Bearing 1220, 1220K | Z:70.3 mm; H:49.2 mm; J:137.5 mm; G:M6x1; T max.:200 °C; C0:19.9 kN; d:38.1 mm; Designation of housing:PLE208N-; A:51 mm; N:14mm; |
| 2322KJ 111622K1 1622K1 2322J Self Aligning Ball Bearing | RoHS:6; Surface Treatment:No; Stroke:No; Seal:Silicone; Bearing Unit, Type:Round flange shape; Basic Load Rating, Dynamic Rating(N):19500; d:25; Fit:J7; Basic Load Rating, Static Rating(N):11300; |