| H319 Adapter Sleeve 85X95X125mm | Bearing Part Number:6205; Bearing Used:Deep Groove Ball Bea; C Chamfered:Not Provided; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Days to Ship:8 Days; Bearing Retained:No; Bearing I.D. d(mm):25; Shape:T-Shaped; |
| H 3040 Adapter Sleeve( Matched Bearing Type:23040CCK/W33, C3040 K) | J:92 mm; Weight:1.67 kg; S:18.8 mm; L:117 mm; Designation of housing:F207N-; A1:15 mm; C:25.7 kN; Recommended tightening torque for set screw:11.5 Nm; d1:51.1 mm; Z:57.6 mm; |
| OH 3088, OH 3088 H Adapter Sleeve(matched Bearing:23088 CAK/W33) | Designation of bearing:UC207-22G2; T max.:100 °C; H:47.6 mm; H1:20 mm; A:48 mm; S:17.5 mm; E:22 mm; C:25.7 kN; L:100 mm; Recommended tightening torque for set screw:8 Nm; |
| 1318 Self Aligning Ball Bearing | s1:27.8 mm; L:162 mm; Designation of bearing:UC211-32G2T04; A1:18 mm; Z:62.8 mm; Designation of housing:F211N-; T max.:100 °C; Recommended tightening torque for set screw:16.8 Nm; A2:58.4 mm; d:50.8 mm; |
| 2206-2RS,2206-2RS-TVH Sealed Self-aligning Ball Bearing | Revolution Frequency (Grease)(rpm):13000; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Load Direction:Radial; Basic Load Rating, Static Rating(N):530; d:12; Volume Discount:Available; Type:Ball; D:18; |
| 29456E Thrust Spherical Roller Bearing | rs min:1.5 mm; Dynamic load, C:66 kN; Fatigue limit load, Cu:2.21 kN; da min:83 mm; Static load, C0:49.5 kN; B:25 mm; Characteristic outer ring frequency, BPF0:4.57 Hz; f0:14.7; Characteristic rolling element frequency, BSF:5.76 Hz; Da max:122 mm; |
| 2209 ETN9 Bearing 45x85x23mm | Stroke:No; Diameter series symbol:For Heavy Load; Basic Load Rating, Static Rating(N):141000; Accessory:No Cover; Grease Type:Standard Grease; Surface Treatment:No; d:90; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Tapered hole adapter; |
| 21317CA Self-Aligning Roller Bearings 85X180X41MM | B1:35 mm; L:95 mm; Designation of housing:F205N-; Weight:0.87 kg; T min.:-20 °C; Dz:60 mm; G:M6x1; d:20 mm; s1:18.5 mm; N:12mm; |
| 22311CAK, 22311CC/W33, 22311CCK/W33, 55X120X43mm, 22311KTN1/W33 Self-aligning Roller Bearing | Weight:0.88 kg; A1:12 mm; A5:19.7 mm; N2:32 mm; Dz:60 mm; G:M6x1; C:14 kN; Designation of open end cover:SCO205-25; L2:10 mm; A2:24 mm; |
| H321 Adapter Sleeve 95X140X74mm | Design Units:Imperial; Series:6300; Aa - Cage-Cone Backface Clearance:0.13 in; D1 - Flange Outer Diameter:5.6527 in; G1 - Heat Generation Factor (Roller-Raceway)10:124; Cg - Geometry Factor11:0.0827; C1 - Cup Flange Width:0.3125 in; a - Effective Center Location3:-0.76 in; C1 - Dynamic Radial Rating (1 million revolutions)5:72300 lbf; Bearing Weight:8.7 lb; |
| 2310K Bearing | Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):58; Bearing Part Number:6201; Bearing Material:[Steel] Steel; Width T(mm):45; Number of Bearings:Double; Volume Discount:Available; RoHS:6; Bearing Retained:Yes (with retaining; |
| Self-Aligning Ball Bearing 2310, 2310K, 50x110x40mm | Basic Load Rating, Dynamic Rating(N):34100; Stroke:No; RoHS:6; Accessory:With steel plate cov; Bearing Inner Dia. Shape:Cylindrical Bore Set; Days to Ship:8 Days; Diameter series symbol:Medium Load; Unit Body Material:Cast Iron; d:40; |
| 23030F3/W33 Self Aligning Roller Bearing | Size Standards:Metric System; Inner/Outer Ring Material:Steel; Combination symbol:DB; Rolling Element Material:Steel; Holder Symbol:L1; d:17; Basic Dynamic Load Rating(N):11600; Type:Angular Contact Ball; Specifications/Environment:Standard; |
| 2318 Bearing 90x190x64mm | e:20 mm; s1:39.7 mm; Designation of bearing:EX209-28G2L4; C:31.85 kN; J:148.5 mm; d1:62 mm; S:21.4 mm; B:42.8 mm; A4:32.5 mm; Weight:2.07 kg; |
| 11204-TVH Self-aligning Ball Bearing 20x47x40mm | Height H(mm):40 ～ 80; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Number of Bearings:Double; Thickness T(mm):37 ～ 59; Type:Bearings with Housin; Shape:T-Shaped; Thickness, Height Indication:T, h Configurable; |
| OH39/560, OH39/560H Adapter Sleeve | T min.:-20 °C; N1:21 mm; L1:56 mm; Designation of housing:PH206-; N:17mm; A:50 mm; H:90 mm; A1:28 mm; L:165 mm; T max.:100 °C; |