| Thrust Self-aligning Roller Bearing 29440E | r - Cup Backface To Clear Radius2:0.130 in; Bearing Weight:231.60 lb; B - Double Cone Width:6.8750 in; Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:57700 lbf; C - Cup Width:2.9375 in; Aa - Cage-Cone Backface Clearance:0 in; R - Cone Frontface To Clear Radius1:0.130 in; Cage Type:Pin-Type; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:175000 lbf; |
| OH 3064 H, OH 3064 Adapter Sleeve(matched Bearing:23064CCK/W33, C3064 KM) | Shape:Bottom Mount; Bearing Retained:No; Housing Material:[Aluminum Alloy] Alu; Number of Bearings:Double; Bearing I.D. d(mm):17; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; |
| OH30/630 OH30/630H Adapter Sleeve | Outside Diameter:1.654 Inch | 42 Mill; Mass:0.07 kg; Rolling Element:Ball Bearing; B:12 mm; Dynamic load, C:9.4 kN; Brand:NTN; Harmonized Tariff Code:8482.10.50.68; ra max:0.6 mm; Minimum Buy Quantity:N/A; Inner Race Width:0 Inch | 0 Millimete; |
| 1322k 111322 1322 Self Aligning Ball Bearing | Dimension A:5.7 in; Shaft Size:65 mm; Dimension T:11.0 in; Tensioning Unit Type:Tension Type; Support Type:Take-Up; Dimension W:1.2 in; Dimension V:4.0 in; Dimension N:9.3 in; Dimension X:0.9 in; Bearing - Housing - Seal UPC:013992098641; |
| 2306K 111606 2306 1606 Self Aligning Ball Bearing | Brand:SNR; Fatigue limit load, Cu:63.4 kN; Number of lubrication holes:3; Radial clearance class:C3; k:4 mm; Nref:3,000 rpm; rs min:2 mm; d2:146 mm; Characteristic outer ring frequency, BPF0:10.62 Hz; D:200 mm; |
| Self-aligning Ball Bearing 1308 K | Basic Load Rating, Static Rating(N):61900; Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Accessory:With cast iron cover; RoHS:6; Diameter series symbol:Used for Light load; d:75; Seal:Triple seals; Basic Load Rating, Dynamic Rating(N):84000; |
| 22206CC Self-Aligning Roller Bearings 30X62X20MM | A2:55.8 mm; B:53.7 mm; A4:36 mm; Z:42.7 mm; A1:15 mm; T max.:200 °C; S:14.9 mm; Weight:4.7 kg; Designation of housing:FC212N-; L:195 mm; |
| 2209 Bearing 45x85x23mm | a - Effective Center Location3:5.8 mm; Cup Part Number:171436; d:241.300 mm; G1 - Heat Generation Factor (Roller-Raceway):1070; Bearing Weight:16.80 Kg; Design Units:Imperial; Cone Part Number:EE170950; C - Cup Width:33.338 mm; G2 - Heat Generation Factor (Rib-Roller End):172; Y - ISO Factor9:1.65; |
| 2312 Self-Aligning Ball Bearings 60X130X46MM | Temperature Properties:Standard; d:45; Bearing Unit, Type:Take-Up Type; Bearing Inner Dia. Shape:Cylindrical Bore Set; Cover Type:No; Lubrication method:Oil-Free Type; Days to Ship:9 Days; Basic Load Rating, Dynamic Rating(N):32500; Basic Load Rating, Static Rating(N):20400; Nominal Number:Groove-shaped steel; |
| 2314 70*150*51mm | Recommended tightening torque for set screw:8 Nm; C0:15.2 kN; J:92 mm; B:37.6 mm; T max.:100 °C; C:25.7 kN; s1:36.3 mm; A2:53.3 mm; Weight:1.68 kg; Designation of housing:FE207-; |
| 2313K 111613 2313 1613 Self Aligning Ball Bearing | Y2 - Geometry Factor:4.48; Grease Lubrication - B/C/O Seal:1300 rpm; Bearing Number:22215; UPC Code:0883450071123; Dimension F:7.19 in; Eng Internal Radial Clearance - Max:0.0031; Y1 - Geometry Factor:3.01; Housing Style:Four-Bolt Square Fla; Dimension E:5.56 in; Dimension S:3.62 in; |
| 22222CK/W33 Self-aligning Ball Bearing | A:60 mm; B:55.6 mm; s1:27.8 mm; Z:27.5 mm; H:63.5 mm; A1:35 mm; H1:22.5 mm; C:43.55 kN; L1:68 mm; T min.:-20 °C; |
| 2315 Self-Aligning Ball Bearings 75X160X55MM | B:42.9 mm; C:30 mm; Recommended tightening torque for set screw:16.8 Nm; S:19.8 mm; m:8 mm; C0:31.8 kN; T max.:100 °C; r:2; d:44.45 mm; Weight:1.47 kg; |
| 1314 Self Aligning Ball Bearings 70x150x35 | A1:32 mm; C0:20.8 kN; T min.:-20 °C; Designation of open end cover:SCOU209-26; B:49.2 mm; S:19 mm; C:31.85 kN; H:53.9 mm; T max.:200 °C; L1:29 mm; |
| 1308K 111308 1308 Self Aligning Ball Bearing | d:12 mm; B:16 mm; ras max:0.3 mm; da min:14 mm; rs min:0.3 mm; F:16 mm; Lubrication hole on inner ring:Non/No; Mass:0.01 kg; Precision class:P0; Brand:NTN; |
| 1203 Full Ceramic Self-aligning Ball Bearings | Bearing Retained:No; Bearing I.D. d(mm):10; Type:Bearings with Housin; Number of Bearings:Double; Holder Surface Treatment:Black Oxide Coating; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 40; Bearing Part Number:6900; |