| 1218 Bearing | Type:Bearings with Housin; Seals:DD (Contact Rubber S; Flange Shape:Compact Type; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; |
| H3048 Adapter Sleeve 220X240X290mm | B:55.6 mm; C0:29.2 kN; Recommended tightening torque for set screw:16.8 Nm; L2:19 mm; s1:27.8 mm; Weight:4.05 kg; Designation of bearing:UC211-35G2L3; H1:130 mm; T min.:-20 °C; H2:102 mm; |
| 1318 Self-aligning Ball Bearing 90x190x43 | Recommended tightening torque for set screw:8 Nm; Designation of bearing:EX210-31G2T20; B:49.2 mm; Weight:2.74 kg; e:28 mm; A1:13 mm; A:44 mm; s1:42.9 mm; G:R1/8"; C0:23.2 kN; |
| 22210MB Self-Aligning Roller Bearings 50X90X23MM | Designation of housing:FC207N-; C:25.7 kN; e:11 mm; d:35 mm; L:135 mm; s1:36.3 mm; Z:30.1 mm; T max.:100 °C; N:14mm; Designation of bearing:EX207G2L3; |
| 1309K Bearing | Width T(mm):24; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Shape:L-Shaped; RoHS:6; Height Indication:Height Selection; Type:Bearings with Housin; Bearing Material:[Steel] Steel; |
| Bimetal Self-lubricating Plate LM074 | T min.:-20 °C; A:38 mm; C:12.8 kN; G:M6x1; J:95 mm; L:127 mm; T max.:200 °C; Recommended tightening torque for set screw:3.7 Nm; C0:6.65 kN; H2:65 mm; |
| 3518 Bearing 90x160x40mm | Rolling Element Material:Steel; Bearing Inner Dia. Shape:Cylindrical Bore Set; Cover Type:Cast iron cover with; Bearing Unit, Type:Pillow Type; Unit, Type:Bearing unit; Days to Ship:9 Days; Heat Resistant Characteristics:Standard; Pillow Type, Category:Standard; Surface Treatment:No; Basic Dynamic Load Rating Cr(N):207000; |
| 2206 ETN9 Bearing 30x62x20mm | Basic Dynamic Load Rating(N):8800; Size Standards:Metric System; Clearance sign:CN (standard); Days to Ship:8 Days or more; Rolling Element Material:[Steel] Steel; Type:Ball; Number of Raceway Ring Rows:Single Row; Max. Allowed rpm(rpm):4800; Inner/Outer Ring Material:[Steel] Steel; Bearing Style:Rubber Sealed; |
| OH 3072 OH 3072 H Adapter Sleeve( Matched Bearing:23072 CCK/W33, C3072 KM) | Seals:ZZ (Double Shield); Number of Bearings:Single; Holder Surface Treatment:Electroless Nickel P; Volume Discount:Available; Type:Bearings with Housin; Height Indication:Height Selection; Shape:T-Shaped; Bearing Retained:Yes (with retaining; C Chamfered:Not Provided; Days to Ship:10 Days; |
| 1207 Self Aligning Ball Bearing | Pre Install Clearance Min:0.050 mm; Housing Style:Take-Up; Y1 - Geometry Factor:3.14; Dimension C:1.00 in; Oil Lubrication - M/N Seal:1600 rpm; Y2 - Geometry Factor:4.67; Dimension A:3.00 in; Dimension S:1.810 in; Dimension G:1.56 in; Shaft Tolerance:0.0020 in; |
| 22372CA Spherical Roller Bearing 360X750X224MM | Designation of bearing:US211G2; A2:33.5 mm; T min.:-20 °C; Recommended tightening torque for set screw:22 Nm; S:11.8 mm; d:55 mm; C:43.55 kN; T max.:100 °C; Weight:1.07 kg; s1:22.65 mm; |
| 22214K, 70X125X31mm, 22214CC/W33, 22214CCK/W33+H308, 22214TN1/W33 Self-aligning Roller Bearing | A:64 mm; Recommended tightening torque for set screw:54.5 Nm; Designation of housing:C317-; A3:4 mm; Weight:12.78 kg; G:M10x1; B:84.1 mm; T max.:100 °C; T min.:-40 °C; SW:7.94 mm; |
| 22216CC Self-Aligning Roller Bearings 80X140X33MM | Characteristic rolling element frequency, BSF:7.31 Hz; da min:172 mm; Characteristic cage frequency, FTF:0.43 Hz; b:13.7 mm; D1:239.8 mm; Y0:2.3; Fatigue limit load, Cu:106 kN; k:6 mm; Brand:SNR; Y2:3.5; |
| 50 mm x 90 mm x 20 mm 1307 ETN9 Bearing 35x80x21mm | G1 - Heat Generation Factor (Roller-Raceway):265.6; Cg - Geometry Factor:0.107; a - Effective Center Location3:-22.9 mm; Bearing Weight:8.5 Kg; R - Cone Backface To Clear Radius1:4.060 mm; Db - Cup Backface Backing Diameter:170.94 mm; D:190 mm; B - Cone Width:65.500 mm; K - Factor7:1.74; db - Cone Backface Backing Diameter:118.11 mm; Size (mm):50 mm x 90 mm x 20 mm ; |
| 1303 Full Ceramic Self-aligning Ball Bearings | Precision:Grade 0; Max. Allowed rpm(rpm):2100; Rolling Element Material:Steel; Bearing Style:Open Type; Type:Ball; Preload Mark:C3; Retainer Type:Momi removing; B:65; D:320; Types:16**/6*** series; |
| 22220C/W33 Self-aligning Ball Bearing | Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Grease Type:Standard Grease; B:60; Machining:No; |