| 22222KTN1/W33 Self-aligning Ball Bearing | Holder Surface Treatment:Black Oxide Coating; Number of Bearings:Single; Width T(mm):10; RoHS:6; Bearing Part Number:625; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):5; Flange Shape:Square Type; Type:Bearings with Housin; |
| 2213 Bearing 65*120*31mm | Precision Grade Symbol:No; Size Standards:Metric System; Outer Ring:With Outer Ring; Specifications, Environment:Standard; O.D.(Ø):150; Torque Symbol:No; Seal, Shield Symbols:No; Days to Ship:8 Days; Number of Raceway Ring Rows:Single Row; |
| 1307 Self-aligning Ball Bearing 35*80*21mm | Volume Discount:Available; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Width T(mm):35; Bearing I.D. d(mm):30; Type:Bearings with Housin; Shape:Flange Type; Housing Material:1045 Carbon Steel; |
| 2200E 2RS1/TN9 Self Aligning Ball Bearing | Weight:1.98 kg; B:49.2 mm; Dz:95 mm; Recommended tightening torque for set screw:8 Nm; S:19 mm; J:148 mm; N:19mm; Designation of open end cover:SCOU209-28; L:108 mm; G:M6x1; |
| 2212K Self-Aligning Ball Bearing | Ca max:3.18 mm; Radial clearance class:CN; Characteristic rolling element frequency, BSF:3.71 Hz; Characteristic inner ring frequency, BPFI:4.38 Hz; rs min:0.6 mm; Brand:NTN; Characteristic cage frequency, FTF:0.37 Hz; Ca min:2.92 mm; da min:16 mm; Static load, C0:2.75 kN; |
| Self-Aligning Ball Bearing 1207, 1207K | Cr - Dynamic Load Rating:118025 lbf; Bearing - Housing - Seal UPC:013992039927; Dimension N:18.3 in; Tensioning Unit Type:Tension Type; Support Type:Take-Up; Ca - Axial Load Rating:8588 lbf; Dimension S:3.4 in; Shaft Size:4-15/16 in; Dimension H:2.2 in; Bearing - Housing - Seal:MSE415BRHATL; |
| 1217K Bearing | Dimension S1:30.1 mm; Material:Bearing Steel; Static Load Rating:2530 lbf; Shaft Size d:1.181 in; Inner Ring Width B:36.51 mm; Bore Type:Cylindrical bore; Weight:0.50 lb; Sub Series:E..KPPB2,3,4; Dimension B1:1.906 in; Set Screw Size:M8x1.25; |
| 2307 Self-aligong Ball Bearing 35X80X31mm | Type:Bearings with Housin; RoHS:6; Width T(mm):13; Number of Bearings:Single; Volume Discount:Available; Bearing Material:[Steel] Steel; Shape:Flange Type; |
| 1302 Self-aligning Ball Bearings | Inventory:0.0; Nlim (grease):10,000 rpm; f:1.7 mm; rs min:1.1 mm; Fatigue limit load, Cu:0.68 kN; Characteristic rolling element frequency, BSF:4.14 Hz; Characteristic outer ring frequency, BPF0:3.08 Hz; rNa max:0.5 mm; B:19 mm; Mass:0.36 kg; |
| 22356 CAC/W33 Self Aligning Ball Bearings 280X560X175 | s1:30.2 mm; SW:3.97 mm; B:25.4 mm; Weight:1.61 kg; d:34.92 mm; d1:51.1 mm; T max.:200 °C; L2:13 mm; A1:12 mm; A:37 mm; |
| 1316 Self Aligning Ball Bearing | Precision Grade Symbol:No; Outer Ring:With Outer Ring; Inner/Outer Ring Material:Steel; Internal Symbol:J; Basic Load Rating, Dynamic Rating(N):62500; Specifications:Standard; Number of Raceway Ring Rows:Single Row; Precision (JIS):Grade 0; I.D.(Ø):25; |
| 21317cck Self Aligning Ball Bearings 85x180x41 | B:76.2; Bearing Inner Dia. Shape:Cylindrical Bore Set; RoHS:6; Pillow Type, Category:Standard; Accessory:With steel plate cov; Grease Type:SH33M; Fit:J7; Seal:Silicone; d:60; |
| 2221 Bearing 105x190x50mm | Y - ISO Factor4:2.1; Series:525; D:3.9380 in; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):13.4; Cg - Geometry Factor:0.0894; Db - Cup Backface Backing Diameter:3.50 in; K - Factor2:2.05; e - ISO Factor3:0.29; Da - Cup Frontface Backing Diameter:3.74 in; |
| 1312 Bearing 60x130x31mm | Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Housing Material:1045 Carbon Steel; Bearing Retained:No; RoHS:6; Days to Ship:8 Days; Flange O.D. H(φ):88; |
| 2209-2RS,2209-2RS-TVH Sealed Self-aligning Ball Bearing | Static load, C0:45.2 kN; Precision class:P0; Brand:SNR; Dynamic load, C:61.2 kN; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:3.16 Hz; rs min:1.5 mm; ra max:1.5 mm; Characteristic rolling element frequency, BSF:4.12 Hz; Nref:6,000 rpm; |
| 1303 Bearing | Housing Material:[Aluminum Alloy] Alu; Type:Bearings with Housin; Shape:Bottom Mount; Holder Surface Treatment:Clear Anodize; Number of Bearings:Double; RoHS:6; Bearing Material:Stainless Steel; T(mm):25 ～ 35; |