| 1312 Self-Aligning Ball Bearings 60X130X31MM | Preload value:1.65 kN; Radial rigidity:949 N/µm; D2:187.42 mm; Mass:3.42 kg; Characteristic outer ring frequency, BPF0:10.27 Hz; r1a max:1 mm; rs min:2 mm; Axial rigidity:450 N/µm; Db max:200 mm; Static load, C0:144 kN; |
| 1203 Self Aligning Ball Bearing | B:25.4 mm; S:9.5 mm; Designation of bearing:ES207-23G2T04; N:10,5mm; J:100 mm; A1:5 mm; Weight:0.88 kg; d:36.51 mm; A2:29.4 mm; Designation of housing:PF207-; |
| 2314K Self Aligning Ball Bearing | db - Cone Backface Backing Diameter:1.85 in; d:1.5 in; da - Cone Frontface Backing Diameter:1.71 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:1750 lbf; C0 - Static Radial Rating:15100 lbf; K - Factor8:1.76; a - Effective Center Location4:-0.18 in; Design Units:Imperial; B - Cone Width:0.7200 in; C1 - Dynamic Radial Rating (1 million revolutions)6:11900 lbf; |
| 23956CC/W33 Steel Cage Self-aligning Roller Bearings | Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:L-Shaped; Bearing I.D. d(mm):12; Lateral Width L(mm):40; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; |
| 1208 Self-aligning Ball Bearings | Basic Dynamic Load Rating(N):4000; RoHS:6; Max. Allowed rpm(rpm):21000; Seal, Shield Symbols:LLU; Type:Ball; Outer Ring Shape:Flat; Size Standards:Metric System; Specifications/Environment:Standard / Dust Proo; B:7; Rolling Element Material:Steel; |
| 22322CAK, 22322CC/W33, 22322CCK/W33, 110X240X80mm, 22322KTN1/W33 Self-aligning Roller Bearing | Seals:ZZ (Double Shield); Bearing Material:Steel; H(inch):0.75 ～ 1.5; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Days to Ship:14 Days; RoHS:6; Shape:T-Shaped; |
| 2318 90*190*64mm | Designation of housing:PH204N-; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; Z:63 mm; C:12.8 kN; d:15 mm; s1:30.5 mm; H:70 mm; Dz:54 mm; T max.:100 °C; |
| 11210 Self-aligning Ball Bearing 50x90x58mm | B:45.3 mm; Dz:110 mm; G:M6x1; d:50.8 mm; Designation of housing:F211N-; Z:62.8 mm; s1:22.65 mm; Recommended tightening torque for set screw:8 Nm; Designation of bearing:US211-32G2T20; A:43 mm; |
| 70 mm x 125 mm x 24 mm S2200 Baring | Shaft:None; Category:Roller Follower Pin; Roller Lining:None; Days to Ship:7 Days; RoHS:6; L(mm):20 ～ 44; Surface Treatment:Black Oxide Coating; Material:[Carbon Steel] 1045; Size (mm):70 mm x 125 mm x 24 mm ; |
| H 3124 Adapter Sleeve | Max. Allowed rpm(rpm):41100; Preload Mark:/GN; Combination symbol:G; Outer Ring Shape:Flat; Inner/Outer Ring Material:Steel; d:20; Contact angle symbol:C; D:37; Days to Ship:6 Days or more; Rolling Element Material:Steel; |
| BS2-2208-2CS/VT143 Bearing 40x80x28mm | Surface Treatment:No; Bearing Unit, Type:Pillow unit; Basic Load Rating Cor(KN):14.3; Unit Body Material:Plastic; Basic Load Rating Cr(KN):24.9; Unit, Type:Insert Bearing Unit; Pillow Type, Category:Lightweight; Rolling Element Material:Stainless Steel; H(mm):175; |
| H3032 Adapter Sleeve 140X160X190mm | S:19 mm; Weight:2.38 kg; T min.:-20 °C; Z:70 mm; J:146 mm; B:49.2 mm; H2:108 mm; C:31.85 kN; Dz:95 mm; A1:37 mm; |
| 1204 K+H 204 Self-aligning Ball Bearings | C1 - Dynamic Radial Rating (1 million revolutions)5:116000 lbf; Cup Part Number:82950-B; T - Bearing Width to Flange:0.8750 in; Bearing Weight:22.8 lb; Cage Type:Stamped Steel; Series:82000; C1 - Cup Flange Width:0.3750 in; Ab - Cage-Cone Frontface Clearance:0.12 in; Y - ISO Factor9:1.36; D:9.5000 in; |
| 1322KM+H322 Self Aligning Ball Bearing | Diameter series symbol:Used for Light load; Grease Type:Standard Grease; Basic Load Rating, Static Rating(N):15400; Bearing Inner Dia. Shape:Cylindrical Bore Set; Rolling Element Material:Bearing Steel; Bearing Unit, Type:Diamond Flange Shape; Fit:J7; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):25700; d:35; |
| Self-Aligning Ball Bearing 1214, 1214K | Shape:Front Mount; Number of Bearings:Single; Type:Bearings with Housin; Days to Ship:8 Days; Holder Surface Treatment:Not Provided; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; RoHS:6; |
| 2203E 2RS1TN9 Self-aligning Ball Bearings | A1:13 mm; T min.:-20 °C; s1:25.8 mm; d:49.21 mm; Recommended tightening torque for set screw:16.8 Nm; L:116 mm; Designation of bearing:UC210-31G2T20; S:19 mm; C:35.1 kN; H:190 mm; |