No. | Brand | C | P | E | f | b | a | h | 1 |
1220X2440 | - | - | - | 73 mm | - | - | - | - | - |
5, | Parker | - | - | - | - | - | - | - | - |
400rpm | INA | - | - | - | - | - | - | - | - |
#6 | - | - | - | - | - | - | - | - | - |
5X | - | - | - | - | - | - | - | - | - |
VLU200414 | - | - | - | - | - | - | - | - | - |
50 | - | 12 mm | - | - | - | - | 20,7 mm | - | - |
15 | - | 14 mm | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
FCM307-P-T4-C55-ST-R1-D0-F00-X-4-00-B34-100-1-D0-495154 | Danfoss | - | - | - | - | - | - | - | - |
21w-60-22130 | INA | - | - | - | - | - | - | - | - |
NUP2210ETVP2 | fag | 76,2 mm | - | 556 mm | - | - | - | - | - |
10xBlue | - | 18 mm | - | - | - | - | 2.87 mm | - | - |
4'x8' | - | - | - | - | - | - | 34,2 mm | - | - |
XT550 | - | - | - | - | - | - | - | - | - |
NN3011 | NSK | - | - | - | - | - | - | - | - |
400/800kg | - | - | - | - | - | - | - | - | - |
RX125 | - | 19 mm | - | - | - | - | - | - | - |
2mm-30mm | - | - | - | - | - | - | - | - | - |
WA500-6 | - | 13.7 | - | - | - | - | - | - | - |
2019 | - | - | - | - | 1,65 mm | - | - | - | - |
N306 | NSK | 12 mm | - | - | - | - | - | - | - |
N20.5% | - | - | - | - | - | - | - | - | - |
R35JRMKT | - | - | - | - | - | - | - | - | - |
NA6913-ZW-XL Double Row Needle Roller Bearing 65x90x45mm | d:800 mm; Size (mm):800x950x70; Outer Diameter (mm):950; Basic dynamic load rating (C):513 kN; Bearing number:CRB 25030; Bore Diameter (mm):800; r min.:4 mm; Da:907 mm; Brand:IKO; Width (mm):70; |
RNA2140 Full Complement Needle Roller Bearing 158x180x36mm | Cone Part Number:X32934M; B - Cone Width:38.000 mm; Cage Type:Stamped Steel; C0 - Static Radial Rating:637000 N; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:35300 lbf; da - Cone Frontface Backing Diameter:179 mm; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:136000 lbf; db - Cone Backface Backing Diameter:183 mm; K - Factor8:1.52; G2 - Heat Generation Factor (Rib-Roller End):0; |
HK1622AS1 Needle Roller Bearing With Lubrication Hole 16x22x22mm | d:2,5 mm; Bore Diameter (mm):2,5; Width (mm):1,5; C:1,5 mm; Brand:ISO; Outer Diameter (mm):5; B:1,5 mm; D:5 mm; Bearing number:617/2,5-2RS; Size (mm):2.5x5x1.5; |
NA6910-XL Double Row Needle Roller Bearing 50x72x40mm | Size (mm):85.725x146.05x41.275; (Grease) Lubrication Speed:2200 r/min; Outer Diameter (mm):146,05; B:41,275 mm; Brand:CX; C:31,75 mm; D:146,05 mm; Basic static load rating (C0):335 kN; Bearing number:665A/653; Basic dynamic load rating (C):229 kN; |
SRF70 Cam Follower Bearing 47.625x88.9x31.623mm | d1:46 mm; Size (mm):25.4x62x19.05; Weight:0,301 Kg; T:19,05 mm; D:62 mm; db:31,5 mm; Inventory:0.0; Nlim (oil):8,200 rpm; B:20,638 mm; Max operating temperature, Tmax:120 °C; |
FNTA6590 Thrust Cage & Needle Roller Assemblies 65x90x3mm | H2:9 mm; Basic dynamic load rating (C):64 kN; r4 min.:0,6 mm; H:50,4 mm; Width (mm):50,4; D1:67 mm; Size (mm):55x100x50.4; B:10 mm; d:55 mm; R:80 mm; |
RLM2010 Needle Roller Bearing 20x27x10mm | Da - Outer Ring Backing Diameter:839.000 mm; Design Unit:METRIC; Bearing Weight:941.700 Kg; e - ISO Factor3:0.36; D:920.000 mm; Cg - Geometry Factor8:0.1149; B - Inner Ring Width:355 mm; Y1 - ISO Factor5:2.78; Y0 - ISO Factor4:1.87; Cage Material:Brass; |
NK32/20-TV-XL Nylon Cage Needle Roller Bearing 32*42*20mm | T:68,262 mm; Da:321 mm; Calculation factor (Y0):0,56; a:85,9 mm; r:3,3 mm; C:47,625 mm; R:7 mm; Size (mm):228.6x355.6x68.262; Calculation factor (e):0,59; Bore Diameter (mm):228,6; |
Needle Roller 10x10mm | Bore Diameter (mm):14,288; Brand:INA; Basic dynamic load rating (C):14,4 kN; D:20,638 mm; Fw:14,288 mm; Bearing number:SCH913P; Width (mm):20,638; Outer Diameter (mm):20,638; Basic static load rating (C0):19 kN; Weight:0,019 Kg; |
NK385230 Needle Roller Bearing For Excavator 38x52x30mm | r - Cup Frontface To Clear Radius2:0.06 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:21900 lbf; Bearing Weight:17.25 lb; Design Units:Imperial; Cg - Geometry Factor12:0.0898; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:38200 lbf; Aa - Cage-Cone Backface Clearance:0.05 in; Ab - Cage-Cone Frontface Clearance:0.08 in; Cup Part Number:742DC; T - Bearing Width across Cones:4 in; |
MR148 / MR-148 Inch Needle Roller Bearing 9.25''x11.125''x3''Inch | D:710 mm; Outer Diameter (mm):710; Brand:ISB; Bore Diameter (mm):530; T:88 mm; Width (mm):88; (Grease) Lubrication Speed:340 r/min; Size (mm):530x710x88; C:62 mm; Basic static load rating (C0):3150 kN; |
RNA2075 Full Complement Needle Roller Bearing 88x110x32mm | Db:119 mm; Mass:2.65 kg; D:127 mm; ra max.:3,5 mm; Characteristic cage frequency, FTF:0.42 Hz; r1a max:3.3 mm; Da:107 mm; Y0:0.68; Characteristic outer ring frequency, BPF0:6.69 Hz; B:44,45 mm; |
NK10/12-TV-XL Needle Roller Bearing 10x17x12mm | da max:187 mm; SRI:24.65; D_a:284; ALPHA_:0; ra max.:3 mm; SREX:0.08; SRIX:0.08; Width (mm):62; fo:13.6; D:300 mm; |
NA5924 Needle Roller Bearing With Inner Ring 120x165x60mm | closure type:Single Shield; Manufacturer Name:NTN; Noun:Bearing; Outside Diameter:4.921 Inch | 125 Mil; maximum rpm (oil):6200 rpm; Weight / LBS:1.87; Inch - Metric:Metric; dynamic load capacity:47500 N; Brand:NTN; outside diameter:125 mm; |
Needle Roller 2x13.8mm | da max:22 mm; Db min.:36,5 mm; e:0.35; Fatigue limit load, Cu:3.45 kN; (Oil) Lubrication Speed:13 000 r/min; Characteristic outer ring frequency, BPF0:6.16 Hz; Da min:33 mm; Bore Diameter (mm):17; (Grease) Lubrication Speed:9 900 r/min; D:40 mm; |
HK101620 Drawn Cup Needle Roller Bearing 10x16x20mm | r min.:1 mm; Bore Diameter (mm):55; Width (mm):13; Outer Diameter (mm):80; db min:60,5 mm; a:26 mm; Basic static load rating (C0):32 kN; ra1 max.:0,6 mm; Weight:0,428 Kg; (Grease) Lubrication Speed:6 700 r/min; |
Needle Roller Bearings
Bearings. Drawn Cup Roller. Clutches. Track Rollers. Radial Needle Roller and Cage Assemblies. Heavy-Duty. Needle Roller. Bearings. Thrust Bearings,
Needle Roller Bearings | Roller Bearings | Products | NSK
Needle roller bearings are a bearing that is classified as either radial or thrust depending on the direction of the load being supported. Needle roller bearings include bearings whose rollers slightly exceed the size range of needle rollers as stipulated by ISO
Needle Roller Bearings: Needle Bearing, Cages & Cam
Featuring a high load carrying capacity, needle roller bearings use long thin rollers - known as bearing needles - as their rolling element. The inner and outer
Needle roller and thrust bearings, and cam rollers | NTN SNR
Choose your needle roller bearings and cam rollers from among our vast premium range, already used by thousands of original equipment manufacturers
Needle Roller Bearings - NTN SNR
12.2.3 Precautions for using NTN needle roller Bearing with. Solid Grease … ... Needle roller bearings have relatively small diameter cylindrical rolling elements
Needle roller bearing - Wikipedia
A needle roller bearing is a special type of roller bearing which uses long, thin cylindrical rollers resembling needles. Ordinary roller bearings' rollers are only slightly longer than their diameter, but needle bearings typically have rollers that are at least four times longer than their diameter
Needle Roller Bearings/Product Information/Koyo Bearings
The track roller is a bearing with needle rollers built into a thick outer ring. It is available in a stud type and a yoke type. Both of these can be tailored to suit the
Needle roller bearings | SKF
SKF needle roller bearings are bearings with cylindrical rollers that are small in diameter relative to their length. The modified roller/raceway profile prevents
Needle Roller Bearings | NTN Bearing
Needle bearings feature a smaller cross-section, higher load-carrying capacity, greater rigidity, and lower inertia forces that facilitate size and weight reductions
NK12/16 / NK1216 Needle Roller Bearing 12x19x16mm Video