| No. | Brand | C | P | E | f | b | a | h | 1 |
| 10 | - | - | - | - | - | - | - | - | - |
| 18mm | INA | - | - | - | - | - | - | - | - |
| A-3 | Bower | 45 mm | - | - | - | - | - | - | - |
| 698 | - | 1 mm | - | - | - | - | - | - | - |
| 5 | - | 51 mm | - | - | - | - | 99,1 mm | - | - |
| 5/2 | Rexroth | - | - | - | - | - | - | - | - |
| Y223NL, | Link-Belt | - | - | - | - | - | - | - | - |
| DH420LC-7,DH60-7,DH80-7,DH370LC-7 | - | - | - | - | - | - | - | - | - |
| MSK070C-0300-NN-S2-UG0-RNNN | Rexroth | - | - | - | - | - | - | - | - |
| 6904 | - | - | - | - | - | - | - | - | - |
| N216 | NSK | 75,8 mm | - | - | - | - | - | - | - |
| 80lm/w | - | - | - | - | - | - | - | - | - |
| F606ZZ | - | - | - | - | - | - | - | - | - |
| 6904LLU/2A | NTN | - | - | - | - | - | - | - | - |
| CXM10/SXM10 | - | - | - | - | - | - | - | - | - |
| 2-25mm | - | - | - | - | - | - | - | - | - |
| 4.8*76m | - | - | - | - | - | 6 mm | - | - | - |
| 12-13mm | - | 4,000 mm | - | - | - | - | - | - | - |
| NLS-LZ16A | - | 46 mm | - | - | - | - | - | - | - |
| 2-5mm | - | - | - | - | - | - | - | - | - |
| 2 | - | 15 mm | - | - | - | - | 25 mm | - | - |
| NU210 | NSK | 7 mm | - | - | - | - | - | - | - |
| (153M | - | - | - | - | - | - | - | - | - |
| KF060AR0 | fag | - | - | - | - | - | - | - | - |
| AXK3047 Thrust Needle Roller Bearing 30*47*2mm | C:140 mm; Da max.:732 mm; ra max.:4 mm; d5:12,5 r/min; B:140 mm; n:23,5 mm; Outer Diameter (mm):750; Calculation factor (Y0):3,86; Calculation factor (Y1):3,95; Limiting speed:600 r/min; |
| MR30 Cagerol Needle Roller Bearing | Width (mm):16; Max Speed (Oil) (X1000 RPM):22; Size (mm):80x110x16; Width (B):16.0000; Bearing Type:25 deg contact, high; Outer Diameter (mm):110; Radius (min) (rs1):0.300; Bore Diameter (mm):80; Brand:AST; Radius (min) (rs):1.000; |
| RLM243216 Solid Needle Roller Bearing 24x32x16mm | Inventory:0.0; s1:11.4 mm; Manufacturer Name:SKF; d2 ≈:161 mm; Da max.:200 mm; Width (mm):69; Basic static load rating - C0:1220 kN; da max.:177 mm; Operating clearance factor k2:0.097; Minimum Buy Quantity:N/A; |
| RNA3055 Full Complement Needle Roller Bearing 72.6x95x38mm | Outer Diameter (mm):32; Shaft Size (ds) - 28 +0 / -0 .033:28 +0 / 0 .033; Bearing Type:steel with bronze; OD Chamfer Length (Co):1.200; Wall Thickness (S3):1.950; Lube Hole Dia. (dl):6.000; Material:Copper plated steel; ID Chamfer Length (Ci):0.500; ID Chamfer Angle (B deg.):35; Housing Bore Dia. (Dh) - 32 +0.025 / -0:32 +0.025 / 0; |
| MR8010436 Inch Series Needle Roller Bearing Without Inner Ring | r min.:1,5 mm; Snap Ring:No; Harmonized Tariff Code:8482.10.50.68; manufacturer product page:Click here; maximum rpm (grease):8800 rpm; d:35 mm; ra max.:1,5 mm; C:21 mm; Bore:1.378 Inch | 35 Mill; Category:Single Row Ball Bear; |
| IRT1025-1 / IRT 1025-1 Inner Ring For Needle Roller Bearing 10x15x25.5mm | A1:8 mm; s1:20,5 mm; Brand:SNR; A:31 mm; L:125 mm; Thread (G):M6x1; B:38 mm; d:25 mm; A4:23 mm; N:12 mm; |
| NKS24-XL / NKS24XL Heavy Duty Needle Roller Bearing 24x37x20mm | Outer Diameter (mm):57,5; Bore Diameter (mm):30; Brand:NSK; Size (mm):30x57.5x21; Width (mm):21; d:30 mm; Bearing number:UV30-6; D:57,5 mm; B:21 mm; |
| 60 mm x 110 mm x 22 mm K43X63X30 Needle Roller Cage Bearing 43*63*30mm | Ce - Dynamic Radial Rating1:66500 N; da - Inner Ring Backing Diameter:55.400 mm; Design Units:METRIC; Cage Type:CR - Phenolic Outer; Limiting Speed (Grease):18100 rpm; r - Outer Ring To Clear Radius3:1.5 mm; Limiting Speed (Oil):36200 rpm; Contact Angle:15 º; do - Ball Diameter:17.462500 mm; Bearing Weight:0.809 Kg; Size (mm):60 mm x 110 mm x 22 mm ; |
| HMK1214L Drawn Cup Needle Roller Bearing | Bearing number:SA1007; Outer Diameter (mm):80; Size (mm):43x80x50; B:50 mm; d:43 mm; Width (mm):50; Brand:FAG; Bore Diameter (mm):43; C:45 mm; D:80 mm; |
| RNA2100 Full Complement Needle Roller Bearing 114.7x135x32mm | Angle (α):25 °; Outer Diameter (mm):360; D:360 mm; 2B:116 mm; a:110 mm; Da max.:342 mm; ra1 max.:1,5 mm; r1 min.:1,5 mm; d:200 mm; Weight:50,6 Kg; |
| AS1024/LS1024 Thrust Needle Roller Bearing 10x24x1mm | C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; Y - ISO Factor9:1.7; Cage Type:Stamped Steel; Series:127000; Da - Cup Frontface Backing Diameter:329.90 mm; da - Cone Frontface Backing Diameter:257.05 mm; B:57.150 mm; R - Cone Backface To Clear Radius1:6.35 mm; G2 - Heat Generation Factor (Rib-Roller End):164.4; B - Cone Width:57.150 mm; |
| TCL427 Thrust Needle Roller Bearing 22.22x42.85x1.984mm | Seal Type:Labyrinth Seal; Center of Bearing from End S:18.3 mm; Outside Diameter D:2.441 in; Dimension S1:30.1 mm; Dimension B1:1.906 in; Bore Type:Cylindrical bore; Number of Set Screws:2; Dynamic Load Rating:4850 lbf; Shaft Size d:1 1/8 in; Sub Series:G1…KLL; |
| F-7809.RST Needle Roller Bearing | Size (mm):165x120x22; rb - max.:0.6 mm; d1:134 mm; Preload class C:456 N/micron; D1:151.01 mm; Calculation factor - Y1:0.92; r3,4 min.:0.6 mm; Attainable speed for oil-air lubrication:17500 r/min; r1,2 min.:1.1 mm; Width (mm):22; |
| NX25Z-XL Combined Needle Roller Bearing 25*37*30mm | Weight:1,41 Kg; d:60 mm; Basic static load rating (C0):36,2 kN; Size (mm):60x110x47; Basic dynamic load rating (C):52,4 kN; B:47 mm; Outer Diameter (mm):110; D:110 mm; Bore Diameter (mm):60; C:7,5 mm; |
| RNA5928-XL / RNA5928XL Needle Roller Bearing Without Inner Ring 160x190x67mm | C:10 mm; d:12 mm; D:32 mm; r1 min.:0,3 mm; Basic static load rating (C0):3,75 kN; B:10 mm; Size (mm):12x32x10; Bearing number:7201AC; Width (mm):10; (Grease) Lubrication Speed:46000 r/min; |
| NA5916-XL Needle Roller Bearing 80x110x40mm | D:160 mm; Width (mm):37; Basic static load rating (C0):76,5 kN; Outer Diameter (mm):160; d:75 mm; C:37 mm; Weight:3 Kg; Basic dynamic load rating (C):114 kN; B:37 mm; Brand:FBJ; |
Needle roller and thrust bearings, and cam rollers | NTN SNR
Choose your needle roller bearings and cam rollers from among our vast premium range, already used by thousands of original equipment manufacturers
Needle Roller Bearings/Product Information/Koyo Bearings
The track roller is a bearing with needle rollers built into a thick outer ring. It is available in a stud type and a yoke type. Both of these can be tailored to suit the
Needle Roller Bearings - NTN SNR
12.2.3 Precautions for using NTN needle roller Bearing with. Solid Grease … ... Needle roller bearings have relatively small diameter cylindrical rolling elements
Needle Roller Bearings | Roller Bearings | Products | NSK
Needle roller bearings are a bearing that is classified as either radial or thrust depending on the direction of the load being supported. Needle roller bearings include bearings whose rollers slightly exceed the size range of needle rollers as stipulated by ISO
Needle roller bearings | SKF
SKF needle roller bearings are bearings with cylindrical rollers that are small in diameter relative to their length. The modified roller/raceway profile prevents
Needle Roller Bearings | NTN Bearing
Needle bearings feature a smaller cross-section, higher load-carrying capacity, greater rigidity, and lower inertia forces that facilitate size and weight reductions
Needle Roller Bearings
Bearings. Drawn Cup Roller. Clutches. Track Rollers. Radial Needle Roller and Cage Assemblies. Heavy-Duty. Needle Roller. Bearings. Thrust Bearings,
Needle Roller Bearings: Needle Bearing, Cages & Cam
Featuring a high load carrying capacity, needle roller bearings use long thin rollers - known as bearing needles - as their rolling element. The inner and outer
Needle roller bearing - Wikipedia
A needle roller bearing is a special type of roller bearing which uses long, thin cylindrical rollers resembling needles. Ordinary roller bearings' rollers are only slightly longer than their diameter, but needle bearings typically have rollers that are at least four times longer than their diameter
TRU426230UU Double Row Needle Roller Bearing 42x62x30mm Video