| No. | Brand | C | P | E | f | b | a | h | 1 |
| 06042-01015 | Komatsu | - | - | - | - | - | - | - | - |
| 7311 | - | - | - | - | - | - | - | - | - |
| BK2538ZWA | INA | - | - | - | - | - | - | - | - |
| 10ton | - | - | - | - | - | - | - | - | - |
| 8 | - | 46 mm | - | 155 mm | - | - | - | - | - |
| 1100 | fag | 12 mm | - | - | - | - | - | - | - |
| 40X68X15 | - | - | - | - | - | - | - | - | - |
| 505 | - | 25 mm | - | - | - | - | - | - | - |
| 6307-2Z/C3HT51 | SKF | 19,05 mm | - | - | - | - | - | - | - |
| 3D | - | - | - | - | - | - | - | - | - |
| 620310 | Nachi | 76,2 mm | - | 248 mm | - | - | - | - | - |
| 32 | - | - | - | - | - | - | - | - | - |
| ZX450 | - | - | - | - | - | - | - | - | - |
| 1400 | - | - | - | - | - | - | - | - | - |
| 6211 | - | 35 mm | - | - | - | - | - | - | - |
| RU8 | TRW | - | - | - | - | - | - | - | - |
| 13 | - | - | - | - | - | - | - | - | - |
| MCR05 | Rexroth | - | - | - | - | - | - | - | - |
| 25406 | - | - | - | - | - | - | - | - | - |
| 3-tier | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| (5 | - | - | 150 mm | - | - | - | - | - | - |
| 6000LLU | NTN | 26 mm | - | - | - | - | - | - | - |
| R480 | INA | 60 mm | - | - | - | - | - | - | - |
| 101n0320, | Danfoss | - | - | - | - | - | - | - | - |
| 15mm | - | 30 mm | - | - | - | - | - | - | - |
| DT125 | - | - | - | - | - | - | - | - | - |
| F682ZZ | - | 65 mm | - | - | - | - | - | - | - |
| 535D | - | 50 mm | - | - | - | - | - | - | - |
| RNA2240 Full Complement Needle Roller Bearing 269.6x300x49mm | C:13 mm; D:110 mm; Basic static load rating (C0):25 kN; Basic dynamic load rating (C):28,1 kN; Bearing number:16014ZZ; Brand:FBJ; Bore Diameter (mm):70; Width (mm):13; Size (mm):70x110x13; Weight:0,43 Kg; |
| TRU9012550 Double Row Needle Roller Bearing 90x125x50mm | Width (mm):26; Weight:0,54 Kg; Basic dynamic load rating (C):78,1 kN; Brand:CX; Bore Diameter (mm):105; Size (mm):105x125x26; Outer Diameter (mm):125; Bearing number:NK105/26; (Grease) Lubrication Speed:2600 r/min; Fw:105 mm; |
| HK2012AS1 Needle Roller Bearing With Lubrication Hole 20x26x12mm | d:25 mm; Width (mm):25,25; Dynamic load rating radial (C):72,4 kN; Bore Diameter (mm):25; Outer Diameter (mm):62; Weight:0,37 Kg; R:1,5 mm; Brand:Timken; r:1,5 mm; T:25,25 mm; |
| HMK1510 Drawn Cup Needle Roller Bearing | Maximum Speed:1740 rpm; Shaft Size:125 mm; Bearing Number:LSM125BR; Dimension U:0.2 in; Note:This product line wa; Dimension S:3.0 in; Tensioning Unit Type:Push Type; Dimension P:1.0 in; Bearing Type:Split Cylindrical Re; Dimension H:2.0 in; |
| 4084110 Full Complement Needle Roller Bearing 62.1x80x30mm | bomp:0; ALPHA_:0; da min:39; B_:10; LangID:1; Size (mm):35x55x10; Oil rpm:15000; (Grease) Lubrication Speed:12 000 r/min; C:10 mm; d:35 mm; |
| BK1312AS1 Closed End Needle Bearing With Lubrication Hole 13x19x12mm | K:16,7 mm; Weight:0,014 Kg; d:6 mm; Outer Diameter (mm):19; Bore Diameter (mm):6; Brand:Timken; B:9,8 mm; Width (mm):9,8; C:8 mm; D:19 mm; |
| BF3020 Linear Flat Needle Roller Bearing | Design Units:Imperial; Cage Type:Stamped Steel; G2 - Heat Generation Factor (Rib-Roller End):112; e - ISO Factor8:0.37; d:6.5 in; Aa - Cage-Cone Backface Clearance:0.25 in; Y - ISO Factor9:1.62; G1 - Heat Generation Factor (Roller-Raceway)10:466; R - Cone Backface To Clear Radius1:0.190 in; B - Cone Width:1.8125 in; |
| HN4525 / HN 4525 Full Complement Needle Roller Bearing 45x52x25mm | D3:155 mm; a:15 mm; d2:85 mm; Basic dynamic load rating (C):146 kN; A1:49 mm; ra max.:1 mm; Width (mm):72.8; r min.:1.1 mm; da min.:100 mm; R:112 mm; |
| NA4830 Needle Roller Bearing With Inner Ring 150*190*40mm | R - Cone Backface To Clear Radius3:0.080 in; C1 - Dynamic Radial Rating (1 million revolutions)6:11400 lbf; db - Cone Backface Backing Diameter:1.71 in; Cone Part Number:19138X; d:1.3780 in; a - Effective Center Location4:-0.06 in; Cg - Geometry Factor:0.0694; C90 - Dynamic Radial Rating (90 million revolutions)5:2960 lbf; B - Cone Width:0.6504 in; Design Units:Imperial; |
| FC66217A Alternator End Bearing / Needle Roller Bearing 17.02x23.83x31.5mm | (Grease) Lubrication Speed:2 600 r/min; Characteristic outer ring frequency, BPF0:10.32 Hz; Weight / Kilogram:1.5; Calculation factor (e):0,44; r1a max:3.3 mm; (Oil) Lubrication Speed:3 500 r/min; a:0,7 mm; Basic static load rating (C0):189 kN; Calculation factor (Y0):0,74; Mass:1.43 kg; |
| NATA5908 Combined Needle Roller Bearing 40x62x30mm | da min.:22 mm; B:14 mm; Weight:0,13 Kg; Min operating temperature, Tmin:-20 °C; r min.:1 mm; Bearing number:1303S; Y0:2.1; Da max:42 mm; Y2:3.1; D:47 mm; |
| MR80 / MR-80 Single Row Needle Roller Bearing 5''x6.5''x2.25''Inch | Brand:ZEN; Bore Diameter (mm):15,875; Bearing number:6202-2Z 5/8; D:35 mm; C:11 mm; Basic static load rating (C0):3,75 kN; Outer Diameter (mm):35; Size (mm):15.875x35x11; d:15,875 mm; Weight:0,045 Kg; |
| BK1210 Needle Roller Bearing 12x16x10mm | B:34 mm; Fw:68 mm; Reference speed:5500 r/min; Size (mm):60x85x34; Static load rating axial (C0):32 kN; Weight:0,59 Kg; Brand:CX; Static load rating radial (C0):108 kN; Dynamic load rating radial (C):60 kN; Width (mm):34; |
| 4G254941HK Mud Pump Needle Roller Bearing 206.375*285.75*222.25mm | Size (mm):75x130x25; Outer Diameter (mm):130; Brand:ISB; d:75 mm; Basic dynamic load rating (C):147 kN; Weight:1,25 Kg; C:25 mm; Bearing number:NU 215; Basic static load rating (C0):153 kN; Width (mm):25; |
| TAF405030 Machined Needle Roller Bearing / Caged Needle Bearing 40x50x30mm | Design Units:Imperial; D:19.5000 in; Cg - Geometry Factor7:0.166; Series:940000; Y2 - ISO Factor6:2.5; Y - ISO Factor1:1.49; Da - Cup Frontface Backing Diameter:18.27 in; K - Factor3:1.45; r - Cup Frontface To Clear Radius2:0.06 in; Y1 - ISO Factor5:1.68; |
| MR24N Cagerol Needle Roller Bearing | r min.:0,3 mm; Outer Diameter (mm):27; B:20 mm; Weight:0,032 Kg; Width (mm):20; d:19 mm; (Grease) Lubrication Speed:14000 r/min; Bearing number:NK19/20; D:27 mm; C:20 mm; |
FNTA1831 Thrust Cage & Needle Roller Assemblies 18x31x2mm Video
Rexroth WE10 Directional Control Valves - CMA/Flodyne
RE 23327, edition: 2013-05, Bosch Rexroth AG. Directional spool valves, direct operated, with solenoid actuation. Features. ▷ 4/3, 4/2 or 3/2 directional design
Rexroth | Bosch Rexroth
Directional valves type WE are solenoid operated directional spool valves. They control the start, stop, and direction of a flow. These directional valves basically
Direct operated | Bosch Rexroth AG
Size 6; Component series 6X; Maximum operating pressure 315 bar; Maximum flow 60 l/min; Area of application in accordance with the Explosion Protection
Rexroth | Bosch Rexroth
Directional valves type WE are solenoid operated directional spool valves. They control the start, stop, and direction of a flow. These directional valves basically
WE6 - Bosch Rexroth
Directional valves type WE are solenoid operated directional spool valves. They control the start, stop, and direction of a flow. These directional valves basically
Rexroth WE6 Directional Valves - CMA/Flodyne/Hydradyne
WE | Directional spool valve. Bosch Rexroth AG, RE 23178, edition: 2013-06. Type 4WE 6 E6X/...E... Directional valves of type WE are solenoid operated direc-
Direct operated | Bosch Rexroth AG
Size 6; Component series 6X; Maximum operating pressure 315 bar; Maximum flow 60 l/min; Area of application in accordance with the Explosion Protection