| No. | Brand | C | P | E | f | b | a | h | 1 |
| CRBH12025 | - | 57,15 mm | - | - | - | - | 9,7 mm | - | - |
| 5-30pcs | - | 31 mm | - | - | - | - | - | - | - |
| W305PP | FAFNIR | - | - | - | - | - | - | - | - |
| Dnb08 | - | 735,000 mm | - | - | - | - | - | - | - |
| 20ton | - | - | - | - | - | - | - | - | - |
| SMR74C | - | - | - | - | - | - | - | - | - |
| BL212C3 | NTN | - | - | - | - | - | - | - | - |
| 18mm | - | 127 mm | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| MMXC1960 | - | - | - | - | - | - | - | - | - |
| 27W | - | - | - | - | - | - | - | - | - |
| 36KLD | FAFNIR | - | - | - | - | - | - | - | - |
| 1996 | Timken | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| Kf-H25 | - | - | - | - | - | - | - | - | - |
| 17244 | Bower | - | - | - | - | - | - | - | - |
| 6342Z | - | - | - | - | - | - | - | - | - |
| 500 | fag | 45 mm | - | - | - | - | - | - | - |
| 18mm | - | 14 kN | - | - | - | - | - | - | - |
| 10 | SKF | - | - | - | - | - | - | - | - |
| 25 mm x 52 mm x 18 mm MR8811248 Inch Series Needle Roller Bearing Without Inner Ring | Bearing number:7013 B; Brand:ISO; Width (mm):18; Size (mm):25 mm x 52 mm x 18 mm ; B:18 mm; Angle (α):40 °; Outer Diameter (mm):100; D:100 mm; C:18 mm; d:65 mm; |
| TLAM2030 / TLAM 2030 Closed End Needle Roller Bearing 20x26x30mm | D:47 mm; B:31 mm; S:12,7 mm; Bearing number:UC201L2; r min.:0,6 mm; C:4 mm; Thread (G):M6×0,75; S2:5 mm; S1:18,3 mm; Weight:0,21 Kg; |
| IRT5020-1 Inner Ring For Shell Type Needle Roller Bearing | ra(max):2; Bearing No.:30214CR; ra max.:2 mm; Da(max):116.5; (Refer.)Mass(kg):1.30; da(min):80; a:29,9 mm; Basic static load rating (C0):158 kN; rb(max):1.5; Bearing number:30214CR; |
| 20NQ2911 Single Row Needle Roller Bearing 20x29x11mm | Width (mm):75; m:0,99 kg / Weight; Brand:INA; Ca:64000 N / Dynamic lo; D1:52 mm; Manufacturer Name:SCHAEFFLER GROUP; B:12,5 mm; D3:50 mm; Category:Ball Bearings; |
| MR18 Cagerol Needle Roller Bearing Inch, 1-1/8" ID, 1-5/8" OD, 1-1/4" Width | (Grease) Lubrication Speed:3800 r/min; Weight:2,5 Kg; Basic static load rating (C0):218 kN; Outer Diameter (mm):150; d:85 mm; C:36 mm; Size (mm):85x150x36; Width (mm):36; B:36 mm; D:150 mm; |
| RLM293820-1 Solid Needle Roller Bearing 29x38x20mm | Basic dynamic load rating (C):14,2 kN; Bore Diameter (mm):18; Fw:18 mm; Bc:14 mm; Basic static load rating (C0):15,2 kN; Ew:25 mm; Bearing number:FWF-182514; Brand:NSK; Weight:0,013 Kg; Outer Diameter (mm):25; |
| NAXI723 Needle Roller Bearing 7x24x23mm | Shaft Size:3-7/16 in; Bearing Number:LSE307BX; Cr - Dynamic Load Rating:42039 lbf; Dimension L:345 mm; Housing Width:5.3 in; Dimension J:290 mm; Maximum Speed:2790 rpm; Bearing Type:Split Cylindrical Ex; Bolt Size:2 x M20; Dimension H:100 mm; |
| RNA4909 Needle Roller Bearing 52x68x22mm | a (max):2.5 mm; Dynamic Load Rating:15,900 N; Weight:0.144 Kg; C:15 mm; UNSPSC:31171504; D1 (max):49.7 mm; D2:57.9 mm; Brand:NACHI; Dx (min):58.5 mm; Enclosure:Snap Ring Groove wit; |
| LM1620 Needle Roller Bearing 16x24x20mm | da - Cone Frontface Backing Diameter:7.64 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:147000 lbf; G2 - Heat Generation Factor (Rib-Roller End):71.4; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:566000 lbf; Aa - Cage-Cone Backface Clearance:0.63 in; d:6.5 in; R - Cone Backface To Clear Radius3:0.530 in; db - Cone Backface Backing Diameter:8.46 in; C0 - Static Radial Rating:439000 lbf; |
| NA6905 Needle Roller Bearing 25x42x30mm | Fw:14,288 mm; Weight:0,014 Kg; Bearing number:B-912; Brand:NSK; C:19,05 mm; Width (mm):19,05; Outer Diameter (mm):19,05; Size (mm):14.288x19.05x19.05; Bore Diameter (mm):14,288; Basic dynamic load rating (C):15,1 kN; |
| 20 mm x 37 mm x 9 mm NK95/36-XL Single Row Needle Roller Bearing 95x115x36mm | Weight:1,724 Kg; B:22 mm; C:22 mm; Size (mm):20 mm x 37 mm x 9 mm ; (Grease) Lubrication Speed:6000 r/min; 2B:44 mm; Basic static load rating (C0):117 kN; Basic dynamic load rating (C):98 kN; r min.:1,1 mm; d:85 mm; |
| AS1730/LS1730/WS81103/GS81103 Thrust Needle Roller Bearing 17x30x1mm | Dimension R:8.6 in; Bearing Number:MSE112BX; Bearing UPC:013992031693; Support Type:Round Flange; Bolt Size:4 x M12; Maximum Speed:4350 rpm; Dimension N:6.571 in; Cor - Static Load Rating:28551 lbf; Cr - Dynamic Load Rating:27202 lbf; Seal Type:Felt Seal; |
| AJ503303A Needle Roller Bearing For Excavator | C:27 mm; Category:Bearings; D:110 mm; B:27 mm; Product Group:B04311; Bore Diameter (mm):50; Bearing number:21310C; Inventory:0.0; d:50 mm; Calculation factor (Y0):2,58; |
| 6018-2RS Rubber Sealed Miniature Deep Groove Ball Bearings 90x140x24mm | Oil Lubrication - T Seal:3800 rpm; Dimension RVV:0.82 in; Bearing Number:22211; Oil Lubrication - B/C/O Seal:1800 rpm; Dimension C:2.99 in; Engineering Group:Mounted Bearing; Dimension D Min:7.18 in; Dimension H:1.25 in; Dimension E:1.57 in; UPC Code:0883450148627; |
| AZK7511011 Bearing Thrust Needle Roller Bearings | Cone Part Number:HM237535; Design Units:Imperial; r - Cup Backface To Clear Radius2:3.30 mm; B:63.505 mm; e - ISO Factor8:0.32; Aa - Cage-Cone Backface Clearance:5.1 mm; Bearing Weight:16.9 Kg; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; Cup Part Number:HM237511; da - Cone Frontface Backing Diameter:183.90 mm; |
| NA4826-XL Needle Roller Bearing With Inner Ring 130x165x35mm | Da max:26 mm; Size (mm):12x28x12; Width (mm):12; C0r:3750 N / Static load; Bore Diameter (mm):12; ra max:0,3 mm; Cr:6200 N / Dynamic loa; m:0,025 kg / Weight; B:12 mm; nG:21900 1/min / Limiti; |
Needle Roller Bearings | NTN Bearing
Needle bearings feature a smaller cross-section, higher load-carrying capacity, greater rigidity, and lower inertia forces that facilitate size and weight reductions
Needle Roller Bearings
Bearings. Drawn Cup Roller. Clutches. Track Rollers. Radial Needle Roller and Cage Assemblies. Heavy-Duty. Needle Roller. Bearings. Thrust Bearings,
Needle roller bearing - Wikipedia
A needle roller bearing is a special type of roller bearing which uses long, thin cylindrical rollers resembling needles. Ordinary roller bearings' rollers are only slightly longer than their diameter, but needle bearings typically have rollers that are at least four times longer than their diameter
Needle Roller Bearings/Product Information/Koyo Bearings
The track roller is a bearing with needle rollers built into a thick outer ring. It is available in a stud type and a yoke type. Both of these can be tailored to suit the
Needle roller bearings | SKF
SKF needle roller bearings are bearings with cylindrical rollers that are small in diameter relative to their length. The modified roller/raceway profile prevents
Needle Roller Bearings - NTN SNR
12.2.3 Precautions for using NTN needle roller Bearing with. Solid Grease … ... Needle roller bearings have relatively small diameter cylindrical rolling elements
Needle Roller Bearings: Needle Bearing, Cages & Cam
Featuring a high load carrying capacity, needle roller bearings use long thin rollers - known as bearing needles - as their rolling element. The inner and outer
Needle Roller Bearings | Roller Bearings | Products | NSK
Needle roller bearings are a bearing that is classified as either radial or thrust depending on the direction of the load being supported. Needle roller bearings include bearings whose rollers slightly exceed the size range of needle rollers as stipulated by ISO
Needle roller and thrust bearings, and cam rollers | NTN SNR
Choose your needle roller bearings and cam rollers from among our vast premium range, already used by thousands of original equipment manufacturers
AS4565/LS4565/WS81109/GS81109 Thrust Needle Roller Bearing 45x65x1mm Video