| No. | Brand | C | P | E | f | b | a | h | 1 |
| 520 | - | - | - | - | - | - | - | - | - |
| 6209 | - | 40 mm | - | - | - | - | - | - | - |
| 3MMV206WI | FAFNIR | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| PSD1 | FAFNIR | - | - | - | - | - | - | - | - |
| PC160LC-7E0 | INA | - | - | - | - | - | - | - | - |
| 2490mm | - | - | - | - | - | - | - | - | - |
| k3v63dt | - | - | - | - | - | - | - | - | - |
| 6212Z | NSK | - | - | - | - | - | - | - | - |
| 1j85 | - | - | - | - | - | - | 12,2 mm | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 3D | - | - | - | - | - | - | - | - | - |
| N0344GR-KMSN | Parker | 43 mm | - | - | - | - | 142,5 mm | - | - |
| QJ314 | - | 28 mm | - | - | - | - | 72,7 mm | - | - |
| 2 | NSK | 37 mm | - | - | - | - | - | - | - |
| (ST-TG01) | - | - | - | 160,5 mm | - | - | - | - | - |
| LM29748 | koyo | 39,69 mm | - | - | - | - | - | - | - |
| **222315** | SKF | - | - | - | - | - | - | - | - |
| CX1000RA | - | 19 mm | - | - | - | - | - | - | - |
| 2008-2012 | NSK | - | - | - | - | - | - | - | - |
| X2F-B10,X2F-B20,XD2F-B10H,XD2F-B20H,XD2F-B32H | - | 24 mm | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 22319-E1-K-T41A | fag | 10 mm | - | - | - | - | 24,2 mm | - | - |
| (10 | - | - | - | - | - | - | - | - | - |
| 6D140 | - | - | - | - | - | - | - | - | - |
| 1819 | - | - | - | - | - | - | - | - | - |
| A1 | INA | - | - | - | - | - | - | - | - |
| 215mm | - | - | - | - | - | - | - | - | - |
| 513180 | Timken | 140 mm | - | - | - | - | - | - | - |
| F-91916 Needle Roller Bearing / Printing Machine Bearing 33x48x15mm | H:60 mm; E:37 mm; M:76 mm; Brand:NKE; d:20 mm; F:9 mm; W:50 mm; V:90 mm; Thread (G):R1/8“; D:12 mm; |
| DL3020 Full Complement Needle Roller Bearing | da - max.:50 mm; ra max.:1.5 mm; Angle ring:HJ 308 EC; Limiting speed:9500 r/min; F:52 mm; Size (mm):90x40x23; Basic dynamic load rating - C:93 kN; Da - max.:81.8 mm; Brand:SKF; rb max.:1.5 mm; |
| 49 mm x 84 mm x 50 mm IRT6050 / IRT 6050 Inner Ring For Needle Roller Bearing 60x70x50.5mm | Bearing number:HKS17X25X15; D:25,000 mm; C:15,000 mm; Bore Diameter (mm):17,000; Outer Diameter (mm):25,000; Width (mm):15,000; Brand:NTN; Fw:17,000 mm; Size (mm):49 mm x 84 mm x 50 mm ; |
| RNA5919-XL Needle Roller Bearing 110x130x46mm | Da - Cup Frontface Backing Diameter:59.44 mm; G2 - Heat Generation Factor (Rib-Roller End):10; Bearing Weight:0.30 Kg; Series:15000; B:19.749 mm; Db - Cup Backface Backing Diameter:55.12 mm; d:31.750 mm; Cg - Geometry Factor:0.0606; R - Cone Backface To Clear Radius1:3.560 mm; e - ISO Factor8:0.35; |
| PNA20/42-XL / PNA20/42XL Single Row Aligning Needle Roller Bearing 20x42x20mm | r2 min.:0,3 mm; d1:67 mm; C:25,5 mm; dk:130 mm; H:36,5 mm; Basic dynamic load rating (C):730 kN; Size (mm):45x112x31; Weight:2,4 Kg; Bearing number:GX 45 CP; Outer Diameter (mm):112; |
| BWC 13239 Sprag One Way Clutch Bearing 57.76X74.427X15.9mm | Size (mm):70x125x24; D:125,000 mm; d:70,000 mm; B:24,000 mm; C:24,000 mm; Bearing number:R1425; Brand:NTN; Outer Diameter (mm):125,000; Bore Diameter (mm):70,000; Width (mm):24,000; |
| SJ8476 Single Row Needle Roller Bearing 2.75''x3.5''x1.5''Inch | D:250 mm; Bore Diameter (mm):140; d:140 mm; B:42 mm; r max:2,5 mm; Brand:Timken; E:231 mm; Outer Diameter (mm):231; C:42 mm; F:159 mm; |
| LM121912 Needle Roller Bearing 12x19x12mm | Oil lub.:3100; Brand:KOYO; r(min):1.5; C0r:108; Basic static load rating (C0):108 kN; D:240 mm; Width (mm):25; ra(max):1.5; Bore Diameter (mm):160; ra max.:1,5 mm; |
| MR14SRS Cagerol Needle Roller Bearing | Bore Diameter (mm):280; D1:347 mm; H:53 mm; d1:283 mm; D:350 mm; d:280 mm; Basic dynamic load rating (C):680 kN; Brand:CX; Basic static load rating (C0):3550 kN; Outer Diameter (mm):350; |
| HFL3030 Needle Roller Bearing 30x37x30mm | Bore Diameter (mm):15,875; Groove Width (C2):0.056; Dynamic Load Rating (Cr):95; Outside Dia. (D):1.125; Groove Dia. (D1):1.075; Static Load Rating (Cor):243; Shaft Dia. (Fw):0.625; Weight (g):54.00; Bearing Type:open type; Open Gap (a deg.):60.00; |
| NA3110 Full Complement Needle Roller Bearing 110x160x45mm | Manufacturer Name:SKF; maximum rpm:4550 RPM; fillet radius:2.5 mm; Outer Diameter (mm):90; rb max.:2.5 mm; ra - max.:2.5 mm; r3,4 min.:3 mm; Calculation factor kr:0.15; internal clearance:C0; |
| RNA4906 Single Row Needle Roller Bearing 35x47x17mm | L:64 mm; Bolt (G):M8; Bearing number:BLF205; A:20 mm; N:10 mm; A1:11 mm; B:27 mm; Basic dynamic load rating (C):14 kN; Bearing No.:BLF205; Bore Diameter (mm):25; |
| NBXI2030Z Needle Roller Bearing With Thrust Roller Bearing 20x37x30mm | a - Effective Center Location4:-0.76 in; da - Cone Frontface Backing Diameter:2.76 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:32600 lbf; Series:6300; B - Cone Width:2.2050 in; K - Factor8:1.8; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:126000 lbf; G2 - Heat Generation Factor (Rib-Roller End):22.4; d:2.1649 in; db - Cone Backface Backing Diameter:2.99 in; |
| HK0910 Drawn Cup Needle Roller Bearing / Needle Roller Bearings 9*13*10mm | Brand:Ruville; Designation FAG:713667450; Designation SKF:VKBA 756; Designation SNR:R151.08; Designation SX:CX019; Compatibility:MERCEDES / 190 / en; Bearing number:5108; |
| RNA4901-XL Single Row Needle Roller Bearing 16x24x13mm | D1(min):164; R:-; Da(max):226; Cu:70.3; D:320 mm; (Refer.)Mass(kg):51.2; Bearing No.:51432; Brand:KOYO; r min.:5 mm; D3(min):-; |
| B-3228 / B3228 Full Complement Needle Roller Bearing 50.8x60.325x44.45mm | Bearing number:RNJ0537; B:15,500 mm; Size (mm):25x52x15.500; Width (mm):15,500; D:52,000 mm; d:25,000 mm; Outer Diameter (mm):52,000; Brand:NTN; C:15,500 mm; Bore Diameter (mm):25,000; |
Needle Roller Bearings: Needle Bearing, Cages & Cam
Featuring a high load carrying capacity, needle roller bearings use long thin rollers - known as bearing needles - as their rolling element. The inner and outer
Needle Roller Bearings
Bearings. Drawn Cup Roller. Clutches. Track Rollers. Radial Needle Roller and Cage Assemblies. Heavy-Duty. Needle Roller. Bearings. Thrust Bearings,
Needle roller bearing - Wikipedia
A needle roller bearing is a special type of roller bearing which uses long, thin cylindrical rollers resembling needles. Ordinary roller bearings' rollers are only slightly longer than their diameter, but needle bearings typically have rollers that are at least four times longer than their diameter
Needle Roller Bearings - NTN SNR
12.2.3 Precautions for using NTN needle roller Bearing with. Solid Grease … ... Needle roller bearings have relatively small diameter cylindrical rolling elements
Needle Roller Bearings | NTN Bearing
Needle bearings feature a smaller cross-section, higher load-carrying capacity, greater rigidity, and lower inertia forces that facilitate size and weight reductions
Needle Roller Bearings/Product Information/Koyo Bearings
The track roller is a bearing with needle rollers built into a thick outer ring. It is available in a stud type and a yoke type. Both of these can be tailored to suit the
Needle roller and thrust bearings, and cam rollers | NTN SNR
Choose your needle roller bearings and cam rollers from among our vast premium range, already used by thousands of original equipment manufacturers
Needle Roller Bearings | Roller Bearings | Products | NSK
Needle roller bearings are a bearing that is classified as either radial or thrust depending on the direction of the load being supported. Needle roller bearings include bearings whose rollers slightly exceed the size range of needle rollers as stipulated by ISO
Needle roller bearings | SKF
SKF needle roller bearings are bearings with cylindrical rollers that are small in diameter relative to their length. The modified roller/raceway profile prevents
BK0709 Needle Roller Bearing 7x11x9mm Video